Customer Reviews for Milwaukee 10 in. x 50 Carbide Teeth Metal Cutting Circular Saw Blade

[This review was collected as part of a promotion.] Great blade for cutting aluminum and other soft metals. My husband has been using it to cut wood as well, but it’s not the best for curing wood, works great for soft metal like aluminum. Would recommend it for any type of soft metal cuts.

[This review was collected as part of a promotion.] The Milwaukee 7-14" Metal cutting circular saw blade works great with my cordless circular saw. I am using this blade to cut 1/4" aluminum sheet and corrugated 29-gauge roof panels. It cuts like butter through both materials. The blade seems to track well and provides burr-free straight cuts with ease. I am using this blade without additional lubricant and it seems to cut well without getting too hot. So far I am very happy with this blade.

[This review was collected as part of a promotion.] I got the Milwaukee 7-1/4 metal cutting circular saw blade for my husband and he was overjoyed when I showed him this blade. He immediately went out to the garage and started to use it . He said it was the best blade he's ever used. Thanks you for a very very happy husband.

[This review was collected as part of a promotion.] I have been doing some work on an old outbuilding getting ready for the winter to come and needed to replace some tin and always wanted a saw blade that was up to the task. This Milwaukee Metal cutting blade knocks it out of the park. Not only does it cut like there’s nothing there it’s not excessive in noise doing it’s job. Great choice and can’t wait to try it on something a little more hefty then just tin sheathing.

[This review was collected as part of a promotion.] I don’t do a lot of metal cutting but did have a small home improvement project I was working on recently and was glad to get this blade. It made my job a whole lot easier. It cut smoothly through the pipe I was cutting as well as the aluminum sheets and rail pieces I was working on. The edges were smooth and not jagged so that was a plus. I was using a cordless saw and it did the job perfectly. Overall I was very impressed with how well this blade cut. Oh and be sure to wear some safety glasses as as there were bits of metal shavings when sawing.

I picked up this blade not so much for metal work because I don't do much metal work but to try it for quality in my 10" miter saw. I figured if it cut metal with no problem it may last longer on wood. The teeth on this blade are not ripping teeth and gave me some doubts but after trying the blade on some wood trim it performed very well. I Think I can honestly say it outperformed all other blades I have ever used. I am very happy with my decision to use it.

I have been a builder and remodeler for 50 years, and as such I have had many occasions where I had to cut metals. But while I could use other tools like a grinder or others, often it is easier if I an just use the tools I already have at hand. For example, a miter saw. That’s why I like this MILWAUKEE 10 IN. X 50 CARBIDE TEETH METAL CUTTING CIRCULAR SAW BLADE. I recently used it to cut some stainless steel all thread, and it cuts cleaner and easier than a grinder.

The Milwaukee 10 inch 50 carbide teeth metal cutting circular saw blade is well made and designed to get the job done. It is rated for cutting steel and aluminum in medium 1/16 to 3/16 thickness. I found it to adequate for the job and easy to work with. I especially liked the packaging that provides easy removal from the plastic sleeve and easy storage after use.

Blade cuts through 14 gauge steel like butter. This Milwaukee 10 inch metal cutting blade cuts through 14 gauge steel like butter. It easily handles the steel cutting task. There is minimal sparking, very little sparking occurs. The noise is not too loud, you can hear it, but it is really not that much louder than cutting wood. One should never become complacent when cutting steel, but this blade makes it so easy that you are almost reminded of cutting wood. The ends of the cut metal have almost no burrs on them. We give it 5 stars since it works very well for the task of metal cutting.

This is an awesome blade if you cut a lot of aluminum. I swapped it out on my table saw but don’t do a whole lot of cuts generally. It might make more sense on a shop saw in a metal shop. Blade is a steel reinforced blade and does make very nice clean cuts. If I could change anything about the product it’d be greener packaging, as it’s encased in the usual non recyclable plastic stuff that’s also hard to even cut the blade out of.

Only lasted 30 minutes before all the teeth were gone

The blade worked well on thin metal. When I had to cut 14 Gage steel it work well but did not last for long. I had to order a second one to finish my aluminum patio project.

So far so good. It made a low effort clean cut through some hard steel!

After cutting only through 6 pieces of 1/8 of metal thickness , the blade is really dull now .

[This review was collected as part of a promotion.] I have been using this blade for a lot of projects since I got it. It makes getting the job done a breeze. I used it to cut through sheet metal on a project and the blade cut through with no hesitation. I also used it on another project to cut through real aluminum siding and it cut as if I was cutting through butter. That was after I had already used it on a couple of previous projects. The blade didn’t get dull or lose its sharpness at all. Very happy with this blade. Made everything a lot easier and cut my work time in half. Another good tool to add to my collection, would definitely purchase in the future.

[This review was collected as part of a promotion.] I received this a couple of months ago. The blade does a nice job on the tubing I was cutting. It was fast cutting and clean. I do a lot of fabricating and have wanted one of these for quite some time. Appears to be good quality.

[This review was collected as part of a promotion.] needed a replacement and this was available. I got it and I must say that it cuts great. Fit my saw like a glove and did everything I needed it to. If and when I need another replacement or any other size, I will absolutely be purchasing Milwaukee. Highly recommended

[This review was collected as part of a promotion.] My husband had multiple projects around the house and needed a new saw blade to finish them. So we decided to give this one a shot. It worked great. It fit nicely in his small saw. He was able to finish the steps and deck all with no issues. No over heating of the blade. It didn't break or dull. Worked out great hubby was very happy with it

[This review was collected as part of a promotion.] We love this metal cutting blade by Milwaukee. We made a metal and wood planter from reclaimed materials we had on hand. Cutting the old tin was so much easier with our new Milwaukee blade. We will definitely purchase different blaaaade types for other projects.

[This review was collected as part of a promotion.] My husband has been using his metal cutting circular saw blade on his skill saw. Makes straight and accurate cuts. Great for all your construction needs. Does amazing on metal sheets ply wood ect. Nice sharp blade that last.

[This review was collected as part of a promotion.] The Milwaukee 7-1/4" Metal Cutting Circular Saw Blade worked exceptionally well for my latest project! The quality of the metal is phenomenal and I did not have any issues with installation or burrs after each use. I will most definitely be using my Milwaukee blade for future projects!

[This review was collected as part of a promotion.] My husband loves this metal cutting circular saw blade. He is forever in his building making crafts or projects for the house. He says that this blade has come in handy for so many of his projects. The metal cutting blade is a wonderful addition to anyone who works with power tools. The blade was shipped very fast even with the delays in packages these days. Just over a week and it was here. Packaged well with care to the person opening it to not get hurt.

[This review was collected as part of a promotion.] This Milwaukee blade is an excellent quality blade. It cuts very well and stays sharp for a long time. Perfect for slicing through metal without any issue. Fits great on a standard circular saw. Milwaukee is always trustworthy and durable, and this blade is proof once again.

[This review was collected as part of a promotion.] This blade is excellent for tough work, it cuts very well and precisely. It is very strong and durable, it is a good savings and a great value for your money. Yes, I recommend it for its quality and durability.

[This review was collected as part of a promotion.] This metal cutting saw blade is excellent!! It does exactly as it advertises and doesn't dull very fast. It's made from high quality materials and put together excellently. I would highly recommend this metal cutting saw blade

[This review was collected as part of a promotion.] I bought this about a month ago because I was curious as to how well it would cut. I haven't seen a blade like this for metal. I will say it was a smooth fast job. I definitely loved how it handled. Will buy again.

[This review was collected as part of a promotion.] Wow, such a great blade and smooth cutting. So easy to put on my saw. So nice and the blade is very sharp and in good condition. Cuts very well and gives me no problem taking off the blade if needed. Must have.

[This review was collected as part of a promotion.] The Milwaukee 48 tooth metal circular saw blade cuts through steel like butter. It can cut through steel, aluminum ,angle, iron ,all thread and strut. The blade is 7 1/4 in fit on a standard circular saw

[This review was collected as part of a promotion.] I have not used this item, nut my husband has. He does remodeling and when he used this blade to cut some gutters that needed to be replaced, He was very happy with how clean the blade cut. Made his job a little easier. He loved it.

[This review was collected as part of a promotion.] This saw blade works well even cutting PVC pipe. I have used it on cutting metal, wood and PVC only because I did not want to change the blades inbetween each cut. The cuts are all smooth. It still feels as sharp as when I first received it and I have used it several hours on several different projects.