Customer Reviews for Milwaukee 3-1/2 in. Titanium Segmented Bi-Metal Universal Fit Multi-Tool Oscillating Blade (1-Pack)

I used this for drywall and not for very long. The blade quickly wore off. Like all it’s little teeth disappeared.

I purchased the Titanium Oscillating Blade to use while rebuilding my storage shed. It was very effective at cutting through the 30 year old 3/4 inch Presaute Treated Floor. The wood that was not damage by termites and carpenter ants had become extremely hard and difficult to cut. The oscillating Fein tool and the Milwaukee Titanium Blade allowed me to make straight cuts along the width of the flooring and remove the segments. The hardened blade made it possible to even cut any nails I encountered.

This 3 ½ inch Milwaukee titanium segmented bi-metal blade is a universal fit. It comes with an adapter as shown in the photo, but I didn’t need it for my DeWalt multi-tool as it fit perfectly. This large circular blade provides a large cutting area that can be used at various angles, and makes short work of many materials. I tested it on PVC conduit and a bolt and it handled both them with no problem.

It's great when you have a power tool that will ease you through a project. Some years ago Code required 5/8 inch drywall in an attached garage and you can hardly believe how much heavier and harder to cut that drywall is. I used an old utility knife on that job and over the years since realize an oscillating tool with a quality blade would have cut my job way down in time and hassle.. Milwaukee makes such a blade with titanium where it matters. This can make quick work of just about any cutting project. Just to try out the blade I cut some old plumbing 1/2 in tubing and then a threaded bolt.. Both were cut in no time. What a great blade to have available for any number of projects. Milwaukee makes quality stuff.

The Milwaukee 3-1/2 Titanium segmented bi-metal blade is designed to fit in most oscillating tools. The titanium teeth on the oval blade allows the blade to cut thru smaller metal objects without damage to the teeth.I started to use a rectangular bi-metal blade to cut the staples, and after ruining the blade, I used this 3-1/2 diameter blade to cut the staple and it worked perfectly. No matter how the tool was held, the blade was making contact with the staples.

The Milwaukee 3-1/2" Titanium Segmented Universal Fit Oscillating Multi-Tool Blade is a great addition to my multi-tool blade collection. This blade easily cuts through wood, wood with nails, and copper. It also cuts PVC drywall. The blade is very durable and it truly is a universal fit blade, it fit on my really old Craftsman and it comes with a Dremel adapter should you need it. This blade is very versatile in that the round an full-encompassing shape allows cuts along a path that even has curves, without much movement of the tool. It works really well for flush cuts of trim and straight cuts in copper and PVC pipes. This blade doesn't require as much control as some others. I would definitely purchase this blade again.

I ordered this blade to be able to cut copper pipe. I'm replacing my old copper bathroom plumbing with PEX piping. I've found out that it is much easier to use an oscillating tool than anything else for jobs like this. I was worried that it wouldn't fit my off-brand oscillating tool but it fits fine. As an added plus, I don't need to swap this blade out to cut wood and PVC pipe. It is designed to cut them all.

The Milwaukee blade is a bi-metal blade and it is a universal fit however it will not fit star lock models. It's designed to cut through wood copper PVC and drywall as well. It is a well made universal blade. What’s really strange is on the front of the package there’s an American flag that states made in USA but on the back side it says the materials are made in China… Go figure.

I used the Milwaukee 3-1/2" titanium blade to trim some curved wood I was installing above a window. because of the trim being curved I wanted a nice fit , and by putting the trim on first then trimming it to fit to the next piece made the fit look good. The fine teeth gave me a nice sharp edge. I made 4 cuts on this project and one of the cuts I made hit a brad nail and the blade cut right through it without any problem. I did try using the blade to trim some thicker MDF material and although it will cut through it the teeth are to fine to do it efficiently. So far I am very pleased with the performance of the blade, and look forward to using it in future projects.

I ordered the MILWAUKEE 3-1/2 IN. TITANIUM SEGMENTED BI-METAL UNIVERSAL FIT OSCILLATING MULTI-TOOL BLADE . I have a free standing basketball hoop that I have had for years. The kids are all grown up and I wanted to get rid of the hoop. I put an add in the paper for a free basketball hoop. Somebody answered the add and wanted to pickup the hoop. I went outside, before they came for it and I sprayed all of the bolts with penetrating oil. When they showed up for the basketball hoop, they started to try and loosen the bolts. Some of the bolts were able to be undone while other bolts seemed to be seized. I remembered that I had this new blade for my oscillating tool. So I got my oscillating tool, put on my new blade and proceeded to cut off the seized bolts. The blade worked like a charm and now the basketball hoop is gone. I am very happy with this blade and I will be buying it again.

This is a very solid multi-tool blade. I have used other brand multi-tool blades before, for example, Ridgid and DeWalt. This Milwaukee is at least on par with those brands on build quality. The blade is thicker than I thought, probably because of the Titanium coating on the out rim. It mounts on my DeWalt oscillating multi-tool perfectly. Note that it is not compatible with star lock type of tools. I have not got a chance to use it to cut anything yet though. I am excited to try it out soon.

I just received this blade. Made in the USA, this bimetal blade has an edge which is enhanced with titanium. It’s listed for use with multiple materials. These include wooden nails, copper, PVC and drywall. I only use it for wood since this is about all I would ever use it for. One of the pieces of wood I cut had a nail in it and it had no problems cutting the nail. Because the edge is rather long, there is a lot of blade in contact with wood, and therefore it will not cut as rapidly as a narrow blade. As far as how long this lasts, I can’t tell at this time, but the packaging says it can last 15 times longer. I had no problems fitting this blade to 2 different multi tools. The compatibility chart includes most major brands. It will not work with Starlock.

cuts 1X4 real well but a little pricey! it is to soon to see if if it will last 4 times longer then a $5 blade

This product is absolutely no good for cutting or even scoring tile. Guess it will come in handy if I need to use it on a plastic product

I had to return 2 of these because they did not fit my Rigid Oscillating tool.

The end came off 2 hours into a job.

It didn’t fit the ryobi multi tool as advertised. So it kept slipping off. I mean I’m sure it would have worked great if it fit. And because I tried to use it and it was a blister pack. I can’t return it.

Too expensive! Cost vs Production is not viable for this blade.

Cut through material easy

Didn’t do simplest required job. I’d return it but I attempted to use it.

Great price great price