Nice thick cover. Needed a heat gun to put it on, as it needed a little more flex than it has to get it on my extended length ratchet. Price is a little steep for what it is, but all of the boots are 30$ so not too bad. I Would like to see a boot for the m12 hammer drill.
by
Verified Purchase
1 found this review helpful
Dec 10, 2019
The rubber boot itself is made well and the rubber feels tough with a little bit of stretch. I wi...
The rubber boot itself is made well and the rubber feels tough with a little bit of stretch. I wish they would make these for the regular ratchets also that are not the extended ones. The rubber feels like the same material like the boot for the impact wrench. It’s definitely worth to invest to protect my tools and I know the rubber material can take the abuse Like tools do. Even after it sitting in my tool bag and getting smooshed and tossed around it still kept its shape. Definitely great protection for my ratchet but I wish it was available and for the non-extended ratchets.
This rubber boot is a great add on for the Milwaukee M12 Extended Reach Ratchet. NOTE: This boot...
This rubber boot is a great add on for the Milwaukee M12 Extended Reach Ratchet. NOTE: This boot is for the Extended Reach Ratchet model--not for the standard shorter ratchet.
The rubber boot fits the head of the extended reach ratchet perfectly. The boot protects the ratchet head, as well as preventing the ratchet head from damaging whatever you're working on. There is a hole in the back of the boot that allows you to twist the switch on the back of the ratchet head to reverse it.
The boot is a bit tricky to put on the ratchet. I put a little bit of grease on the wrench head and the opening of the rubber boot. It took a few attempts, but I was eventually able to stretch the boot over the ratchet.
It fits like a glove and is high quality rubber.
This rubber boot is a must have if you own an M12 extended reach ratchet. It does a great job of...
This rubber boot is a must have if you own an M12 extended reach ratchet. It does a great job of covering up the ratcheting mechanism and provides some impact protection against those inevitable drops.
Dropped mine from a height of ~4 feet and it landed on the head. Tool was undamaged as was my floor. Getting the boot on was a bit tricky since it's a snug fit. Definitely recommend it!
If you own a Milwaukee M12 FUEL Extended Reach Ratchet than I have to say, you gotta have this Mi...
If you own a Milwaukee M12 FUEL Extended Reach Ratchet than I have to say, you gotta have this Milwaukee M12 FUEL 3/8 inch Extended Reach Ratchet “Rubber Boot”. This rubber boot does two things that are both important to me: One, it protects the tool from dirt and debris. Two it protect the work. Paint jobs and interior trim scratches are not cheap. Also, working on high end vehicles and even under the hood in some cases, the rubber boot protects against damage from bumps from the tool. This is a great accessory. The rubber is extremely durable and fits this ratchet head like a glove. Two thumbs up Milwaukee!
The Rubber Boot for my 3/8-inch Extended Reach Ratchet fits great. Milwaukee recommends the boot ...
The Rubber Boot for my 3/8-inch Extended Reach Ratchet fits great. Milwaukee recommends the boot for protection for the extended ratchet if it is frequently used. I got the boot because it seemed like the right thing to do to protect the tool. At room temperature, the Rubber Boot was able to be stretched over the end of the ratchet. The directional switch and the 3/8 drive have plenty of room to operate after the Boot is installed. The Rubber Boot does have the Milwaukee logo on one side, and this looks the best when installed on the directional switch side (top side) of the tool. I like the Milwaukee Rubber Boot and would recommend it to anyone who has a M12, 3/8 inch extended reach drive ratchet made by Milwaukee.
The is a great addition to the tool. It's no just to protect it, but helps to protect whatever yo...
The is a great addition to the tool. It's no just to protect it, but helps to protect whatever you're working around. It'll help keep dirt, grease and chemicals out of your tool. Stretch it a little to get it started over the end and then it slides right into place. Let the replaceable rubber boot take all of the abuse and protect one of your soon to be favorite tools.
I received my Milwaukee 3/8-inch extended reach ratchet rubber boot; This is an excellent form-fi...
I received my Milwaukee 3/8-inch extended reach ratchet rubber boot; This is an excellent form-fitting boot that will protect the ratchet and the work surface too. I like the fact that it is very flexible and easy to install.
It is a little bit pricey but appears to be very durable and should last quite a while. Overall this should keep debris out of the ratchet mechanism helping the ratchet last longer.
Great fit originally bought the wrong boot this one fits perfectly
by
Verified Purchase
Jan 24, 2024
by
Verified Purchase
Jan 17, 2024
Fit is super loose!
It may end up working kinda sorta as intended, but like I saw another review say it is super sloppy. I have these rubber boots on other tools and the fit is much better. No slop. I love my Milwaukee stuff, but every once in a while they let u\a head scratcher slip through.
Don't buy M18 12.0 batteries! Mine are all failing early with hardly any use. I have batteries from 12 years ago still going strong but the 12.0's are garbage IMO.
Don't buy that stand up vacuum!
Milwaukee, tighten it up.
by
Response from Milwaukee ToolJan 17, 2024
Please ensure the boot is intended for your ratchet's model. If you have questions you can email us at social.media@milwaukeetool.com.
If you are experiencing issues with your battery, please email us a picture of your battery's serial number and your contact information at social.media@milwaukeetool.com! - Milwaukee Tool, Social Team
Dec 28, 2023
Less the 1 star, I only selected 1 star because that is the lowest i can. It does not fit well at all, just floppy floppy all over the place, My first one on the standard 3/8 was awesome.
by
Response from Milwaukee ToolDec 28, 2023
James, thank you for taking the time to review your Extended Reach Ratchet boot and we are sorry to hear that it didn't fit as expected. We would like to confirm which unit you paired it with. Could you send our team an email at Social.media@milwaukeetool.com? Thank you - Milwaukee Tool, Social Team
Verified Purchase
Dec 27, 2023
by
Verified Purchase
Oct 16, 2023
Very handy, and worth every penny… You can buy cheaper ones, but you’ll wish you didn’t
by
Verified Purchase
Mar 23, 2023
by
Verified Purchase
Feb 16, 2023
by
Verified Purchase
Jan 26, 2023
by
Verified Purchase
Dec 21, 2022
by
Verified Purchase
Oct 19, 2022
Fantastic tool!
Great tool! Makes life easier.
by
Verified Purchase
Oct 17, 2022
Excellent protection for the tool...
Excellent protection for the tool
by
Verified Purchase
Sep 14, 2022
Could use a little more rubber in length otherwise it...
Could use a little more rubber in length otherwise it great.
by
Verified Purchase
Jul 13, 2022
by
Verified Purchase
Jun 15, 2022
Couldn’t install it, and neither could the sales person. So...
Couldn’t install it, and neither could the sales person. So I cancelled it .
Ron Glassman
by
Verified Purchase
May 25, 2022
Protects the head of the ratchet from getting beat up....
Protects the head of the ratchet from getting beat up. If you’re someone who likes to take care of their tools then I recommend this rubber boot.
by
Verified Purchase
May 19, 2022
by
Verified Purchase
Apr 5, 2022
I have been very impressed with this tool. It is...
I have been very impressed with this tool. It is very strong for it's size.