Customer Reviews for Milwaukee SHOCKWAVE Impact Duty 2 in. x 1/4 in. Slotted SL#10 Alloy Steel Screw Driver Bit (1-Pack)

This set will last a lifetime. Project farm sold me on this with his yt video comparing the different Philips #2 on the market. Well made and plenty of variety, enough bits to cover pretty much everything out there. Could use a few more flat heads though.

I usually buy my s2 bits from the cabinet supply place but it's not conveniently located and I needed some bits so I thought I'd try these. I recently purchased these bits and they're very precisely machined, they fit perfectly and will hold the screw better than any other box store bits I've used. The square tip is actually square with sharp, not slightly rounded corners like most bits. I also gave one to my helper and after a kitchen install (lots of square drive screws for cabinets) and bath remodel we're both still on the first bit and they seem just as good as new.

I use a lot of square tip screws and these are excellent bits to drive them in securely!

Excellent solid Phillip's bit

Work perfect, and great gripping power!

We are building Screech owl boxes and these really come in handy in multiples in one package. Each box has about 100 screws and we are grateful not to have to drive 30 miles round trip to get another drill bit. Thanks for the durable bits.

This was great until after about a month. This bit bent after regular use. Wasn't anything crazy either, just used during a basement remodel. Reached out to Milwaukee for a replacement, they would not replace. Said Shockwave bits are not covered under warranty. Only Matrix Carbide bits are covered. I will not buy Milwaukee in the future..

I really like how well the tip stays square and and don't round over with just driving a few screws!

I like them because they seem to hold up to stainless steel screws.

The steel tip is very durable and fits perfectly into any ph1 Phillips head screws. The extra long design of the bit makes it much easier to get into small spaces and get the job done. The bit is very thin at the top and thick at the bottom so it can withstand anything.

I work as an apartment maintenance supervisor and when working on washers and dryers this is thr first bit i grab. The screws are PH2 but also fit SQ2. I have stackable units ans these allow me to get the restraining screws out, as well as pretty much any other screw holding any surface panel in either unit. This is a lifesaver because of its slim nature. My bit extender with SQ2 bit wouldn’t fit into slim places. Bought a 5 pack for me and my guys to all have 1.

This is the longer driver for a large head screw. Fits easily into the Milwaukee driver base and gives great leverage when getting to the deeper places where a screw is being inserted. Found the whole tool set of drivers to be worth the investment as they do not easily round out the heads from misuse. Each package has 5 drivers so with proper use these will last a long time as a DIYer.

These are nice bits. They do not deform easily and fit my impact drivers (Milwaukee and Ryobi) well. A #1 square is too small for some screws including the Kreg I have but otherwise these are nice bits. I think the screws on my deck are also #2 so they would be more useful but there is nothing wrong with these for screws that need a #1 square drive bit.

These impact driver #1 steel screw driver bits are well made. They are 3.5 inches long and when installed into your impact driver provide a great deal of reach to install or remove #1 Phillips head screws. The hex head fits perfectly into the impact driver. With the extra length of the screwdriver bits it makes getting into those deep tight spots easy, but they also work well on screws that’s are at the surface level. There are 5 bits in each pack, so they will last a long time. Just like all Milwaukee tools these meet my expectations. Definitely recommend.

These impact driver #3 steel screw driver bits are well made. They are. 3.5 inches long and when installed into your impact driver provide a great deal of reach to install and/or remove Phillips head screws. The hex head fits perfectly into the impact driver. With the extra length of the screwdriver bits it is easier to get into tight spots, but they work equally well for screws that at a surface level. There are 5 bits in each pack, so these will last a very long time. Milwaukee tools always meet my expectations and demand. Recommend.

Have to give 'MILWAUKEE® SHOCKWAVE' Impact Bits my 5 Star rating, having used them for some time and earlier this year for building our 50 x14 deck from the ground up and they never failed me. That out of the way, the PH1 Philips bit is smaller than the standard #2 and is used for the small -without saying- headed Phillip screwheads, finer finishing one way to view it. I used the shockwave bits of all size's mostly in my cordless impact driver, they get a workout - a ture test both removing and driving screws. They also work great in my hand T-driver and small ratchet and they are made to just fit better in not only your drivers, but the screw head it's self. .

I’ve found these SHOCKWAVE #3 Philips screwdriver bits to be an excellent match for the high torque produced by my Milwaukee M18 Cordless hammer drill/screwdriver. I don’t have to fully comprehend the innovative metallurgy involved in the construction of these bits to be able to appreciate their durability. I’ve worn a couple down but I’m not sure that I’ve actually worn one out. I try to use only the highest quality Phillips head screws. I’ve found that high-quality screws are less likely to strip due to overtightening. This is especially important with the Shockwave bits; they tend to not slip out of the Phillips driving recess when the screw is tight. This has sometimes caused me to sink the screws deeper than I wanted. But better to overtighten a little bit than to strip out the recess. I particularly like the way the bits are labeled. The point size (PH3) is etched in white on the hex end and it’s easy to read the white lettering on the black metal. Bits were made in China.

Milwaukee shockwave Phillips #1 3.5" long impact heavy duty screwdriver bits. These bits are outstanding with Wear Guard tip and custom alloy that will withstand the punishment over time. I have used various brands of driver bits over the years and these out performed all of them. They work great with impact drills and will hold up longer . I build 14 steps fastened to two stringers and a hand railing to go from my deck to the lower yard. I used one of these bits in more than 100+ ceramic coated 3" long screws in 1 1/2" thick pressure treated wood. . Held up very well and the tip still looks like it could be used to drive another 100 screws in. They are extremely durable . I love these driver bits. Just toss the pack of bits into your tool bag and you're good to go. I highly recommend these impact duty steel screwdriver bits.

The proliferation of drill drivers and bits for them has made life a lot easier and I'm guessing has hurt nail and hammer sales. Why put things together with nails when screws are so much better? I have kegs of nails in my shop I'll probably never use. I've taken to putting handfuls of nails down gopher holes, in a classic upcycle, to discourage them from digging my lawn. But we're here to discuss these MILWAUKEE SHOCKWAVE PHILIPS #1 3.5 IN. IMPACT DUTY STEEL SCREWDRIVER BIT (5-PACK). These are the smaller Philips. These will be great to use when taking the back off an electric appliance. You know the ones with the sticker "NO USER SERVICEABLE PARTS INSIDE" (that doesn't mean us). Zip, zip, zip, zip, the backs off in a trice. I associate Milwaukee Tools with quality. These have what they call a "wear guard tip". I've used them before and they seem to last and last without rounding off of the facets. These bits are extra long and being slim will reach into tight spots. They also promote the "shock zone" which is the quality of their shaft and the specialness of the alloy steel it's made of. It's nice to have 5 in the pack. These tend to get spread out to the 4 corners of the earth as time goes on so you can keep the pack in your toolbag or toolbox and go to the well when you need one,Now!

I always imagine the first drill driver was invented soon after the first drill was invented when a guy cut the handle off a screwdriver, put the shaft in the chuck, and then him and his buddies declared him a genius. These drill/driver bits are made by Milwaukee tools, a company I've come to associate with quality. You get five in the pack, a good idea as these things somehow seem to grow legs. They often find their way onto my nightstand. A few years ago I started to notice these with a skinny shank. They work just as well as the old style "fat" bits. Milwaukee tools claims they have a "wear guard tip". I could see the quality of the steel and the way it was worked effecting the useful life of the bit. Not too hard, but hard enough. They also advertise their skinny shaft as a kind of "torque-tamer". If true a benefit in the prolonged useful life of this bit. Sounds like a win/win;wear guard tip and shockzone shaft. I have a camping trailer and it is loaded with these square drive screws. I'll get a lot of use out of these.

Milwaukee SHOCKWAVE #1 2 in. Impact Duty Square Steel Power Bit (5-Pack) review: Oh yeah, another great Milwaukee product. I have been using my GEN3 Milwaukee Impact Driver more and more and this accessory just works in real nice. I like the Robertson (square) screws (not as much as Torx though) and Milwaukee has a very useful set of bits here. They take a beating and show no wear. I impacted some screws into pressure treated pine and some redwood with this screw bit and it performed flawlessly. No breaks, no wear, just results. Gotta love Milwaukee! There ya go!

These MILWAUKEE SHOCKWAVE SQUARE #1 3.5 IN. IMPACT DUTY STEEL SCREWDRIVER BIT (5-PACK) are the best thing I’ve used in years! At 3 ½”, they are long enough so that you don’t need to use those flimsy extensions, and being that they are impact rated, they can stand up to the toughest beatings. If you’re like me, you’re stuck using those super short bits that typically come with screw gun sets. Well now, you don’t have to! These bits are long enough to use with most common jobs around the house, as well as many specialty jobs. I won’t ever use the short ones again as long as I have these!

These MILWAUKEE SHOCKWAVE PHILIPS #3 3.5 IN. IMPACT DUTY STEEL SCREWDRIVER BIT (5-PACK) are the best thing I’ve used in years! At 3 ½”, they are long enough so that you don’t need to use those flimsy extensions, and being that they are impact rated, they can stand up to the toughest beatings. If you’re like me, you’re stuck using those super short bits that typically come with screw gun sets. Well now, you don’t have to! These bits are long enough to use with most common jobs around the house, as well as many specialty jobs. I won’t ever use the short ones again as long as I have these!

Another great product from the people at Milwaukee. These bits are heavy duty with the wear guard tip and the shockzone to absorb pressure and torque. I recently used these to rebuild my cedar deck. All the old boards were put in at different times over the years and having a good selection of these bits made it much easier to remove the different screws that were used. These bits stood up to the torque used to install the new 2x6 boards into pressure treated joists. These bits are a must have for any tool bag/box.

Another great product from the people at Milwaukee. These bits are heavy duty with the wear guard tip and the shockzone to absorb pressure and torque. I recently used these to rebuild my cedar deck. All the old boards were put in at different times over the years and having a good selection of these bits made it much easier to remove the different screws that were used. These bits stood up to the torque used to install the new 2x6 boards into pressure treated joists. These bits are a must have for any tool bag/box.

Another great product from the people at Milwaukee. These bits are heavy duty with the wear guard tip and the shockzone to absorb pressure and torque. I recently used these to rebuild my cedar deck. All the old boards were put in at different times over the years and having a good selection of these bits made it much easier to remove the different screws that were used. These bits stood up to the torque used to install the new 2x6 boards into pressure treated joists. These bits are a must have for any tool bag/box.

Another great product from the people at Milwaukee. These bits are heavy duty with the wear guard tip and the shockzone to absorb pressure and torque. I recently used these to rebuild my cedar deck. All the old boards were put in at different times over the years and having a good selection of these bits made it much easier to remove the different screws that were used. These bits stood up to the torque used to install the new 2x6 boards into pressure treated joists. These bits are a must have for any tool bag/box.

The Mikwaukee Shockwave square #1 size in 3.5 inch length designed for impact use in a 5 pack arrived quickly and well packaged. All 5 packs were included together in the box. I selected it because of the name brand, Mikwaukee. I like the length and Wear Guard tip for gripping performance. The important feature is the hexhagonal end for insertion in a regular chuck or 1/4 inch impact chuck. I use it for #1 size square fasteners which are the best. The quality is superb, easy to use and they're working out as usual because of Mikwaukee's product quality. I have their other impact bits and impact bit holders and they give me long lasting quality. I love Mikwaukee!

These square drive bits are excellent quality. My house has a lot of fasteners that are square drive, so I use them a lot. They fit the screws nice and tight so no stripping out the slots. I use them in my drill and they perform like a champ. Tough ones I use a 1/4 inch drive socket to break the screw loose and then finish it with the drive in my drill. With 5 per pack you will never run out of drivers. They are very tough and do not seem to wear much.

Very strong bit for your larger sized philips head screws. These are specifically for the #3 size and have a thick, well machined tip that will not work for the more common #2 and #1 sizes. This bit is heavy for its size and allows use with higher torques and impact drills. I have not experienced any flaking off of the bit or breaking. Very high quality bit.