Customer Reviews for NewAge Products 12.5 in. LED Black Under Cabinet Light with Power Adapter

Great accent and task light … magnet makes install a breeze

It was very quick and easy to install, works really well, and looks great on my New Age cabinet set. ,

Was almost exactly what I expected. Good products, easy to install looks nice! Have to level the lockers otherwise the doors don’t close buts that’s to be expected. Only downside is the slat wall shipped damaged.

Very solid construction and relatively easy to install - with two people. Packaging was excellent (lots of material) and no damage was found. Having extra hardware was helpful. The 42" cabinet was very slightly not square in one corner which affected door closure. You can probably pick it up in the attached pics. Delivery was smooth and driver assisted with rolling the skids into the garage!! Side note: Cabinets and shelves were ordered prior to cyber week specials and NewAge honored the price match policy!

In my previous home, I installed Gladiator products in my garage. In my newly built home, I was looking for something a little nicer. I am happy with the purchase. I still went with some Gladiator products for hanging shovels, etc, but the NewAge cabinets look good and the quality is up to par for a home garage.

Got this as a Father’s Day gift after many local quotes for garage cabinets costing 3X as much! I’m IMPRESSED! Fast delivery, perfectly packed, and basically assembled. They are a breeze to install, especially after popping the doors off. Can’t wait to finish the garage now!

I purchased the NewAge Pro line. I am more then happy with the quality and appeal.

I was looking to improve storage in my garage. This product was delivered to my home and the installation was very easy. Toughest obstacle was finding the studs in my garage.

The LED Light Adapter doesn’ t come with installation instructions, so I improvised based on reading other’s reviews. I confirmed that the Wall Cabinet Light Valence is not designed to hold the LED Light Adapter - the LED Light Adapter is designed to be installed on the underside of the Wall Cabinet. I used 3M automotive trim tape to do the trick (rather than the double-sided tape that came with the LED Light Adapter). I first cleaned the backside of the LED Light Adapter with alcohol, and did the same to the underside of the Wall Cabinet. I then centered the LED Light Adapter on the underside of the Wall Cabinet, installing it so that it butts up against the edge of the Valence. Next I did the same with two LED Light Connectors. The 40cm length of connecting wire that comes with these are the right length for centering the LED Light Connectors on their respective Wall Cabinets.

I ordered two of these LED light units (one with the Power Adapter and one without) to mount under a pair of NewAge Pro 3.0 Wall Cabinets that I also ordered. Although these units were quite a bit more expensive than other LED lighting I was considering, I ordered the NewAge ones because I thought they might be especially designed to work with their wall cabinets. However, that was not the case...no specific mounting brackets/hardware nor do they match in appearance. I ended up just using a magnetic strip to mount the lights. What I found interesting is that the LED Light unit without the Power Adapter comes with a magnetic strip (it is even listed as an included item on the packaging) whereas the LED Light unit with the Power Adapter does not include the strip (and it is not listed on the packaging). Since the strip is the entire length of the unit, I took the one strip I had and cut it in two and applied a half to each light. Having only half the magnetic power still seems to hold the units in place. The two light units do a pretty good job of lighting the area directly under the cabinets they are mounted on. The one light unit that came with the Power Adapter has a switch that also controls the other units connected to it (apparently you can have up to 3 additional lights units powered and controlled by the unit with the on/off switch & adapter). The units are made of mostly plastic, so only time will tell how well they will hold up. For now, they are doing the job I need them to do. But knowing what I know now, I would have purchased another, less expensive, brand.

Lighting kit is pretty straight forward, 1 little push button switch to turn on all lights that are chained together. Not sure why so many are complaining about instructions & function, the Lights themselves don't really get any easier to install, if you can't figure them out you most likely probably shouldn't be installing cabinets. I did have to call Newage to get some of their new adhesive magnetic strips for the actual LED lights to attach to underside of wall cabs, my lights came with the old small adhesive plastic clips that people are complaining about not holding & falling off.....they are sending free of charge as I had specifically asked them when ordering if Lighting was magnetic now & they told me it is. Newage does NEED to modify the wire management channels underneath to allow for running the Lighting wiring thru & around corners of rear channels, I had to grind on them to get the actual Power Supply wiring connector to be able to phish thru the rear corners to run up to the front channels & onto the Light itself (see pics). I decided to run a 120v outlet up into my center wall cab to power the Lighting for a much cleaner install, luckily for me the 120v outlet below my wall cab was end of line so there was room in the gang box for additional conductors to phish some romex up the wall into the upper right corner of the cab, keeping the outlet & transformer plug out of the way (see pics). And yes, additional 120v outlet is GFI protected & tested!

I bought this with three of the connector lights. One switch turns on all four lights rather than having to turn each one on. Makes a great accent to the worktop and compliments the new Newage cabinets. These lights would also be great under kitchen cabinets as well. The only problem I had was, after using the two supplied small pieces of tape to hang them with, two of the lights fell off. I bought some double face tape to cover the entire light and they have stayed in place. I am very excited over these lights.

Recommended color temperature for Garage Workbench from multiple source is 5,000k color temperature. These were added on to my Garage Cabinets as recommendation from NewAge sales. Does not match my existing garage lighting color and is not available in a more daylight color.

Now I am able to see details under my car

The lights don't stick very well. And I can't put them on a timer for on/off. It's tall and hard to reach the light switch.

OVERALL GOOD QUALITY AND APPEARANCE. VERY FUNCTIONAL FOR CORE WORK CENTER AND STORAGE OF GARAGE

Installed them myself and they were pretty easy. Good quality and they look great in my garage.

Magnets do not stick to the lights and the lights keep falling off the magnets. I find the lights laying on the bench the next time I got out the shop.

Cables too short and was going to require a separate outlet for each. My construction guy bought some LED lights that worked instead with only one plug (hidden)

Magnets don't hold I had to finally use 3M tape They are a nice fit but warm light not bright

Easy to install, nice quality, but light temp. was too warm for work top and my preference.

Wonderful little LED lights on my 8piece cabinet and workstaion

Despite the high price, I bought and installed these yesterday with the magnetic strips, and all had fallen off overnight. Low humidity, cool weather, and yet these will NOT reliably attach the lights to my new Bold Series metal cabinets. Also, very low level light means that they are pointless for illuminating the workspace beneath.

After epoxying the garage floor my wife asks me to clean it up! On the advice of a friend I looked at and bought new age. One of the few systems I considered that came fully assembled. I only had to add the shoes to the bottom. Like the quality utility and appearance.

A little dimmer than I expected. Not bad. Just make sure you purchase the right additional pieces. There's a daisy chain unit and a wall plug unit.

Easy to install and just the right lighting.

Really lights up the cabinet area/ so easy to move with it the magnetic strip