Customer Reviews for ruiling Wall Mounted Single Arm Toilet Paper Holder in Stainless Steel Matte Black

This is a well built toilet paper holder. It could also be used as a hand towel holder. It is bigger than most out there. It is very sturdy and the paint won’t rust. It was very easy to install and it comes with all the necessary hardware. It comes with instructions that are easy to follow. When installing make sure it goes into a stud or something very solid so it can adjust well. Once installed it is not bouncy or floppy. It attaches very well. My kids don’t have a problem using it. Would recommend. The color is gorgeous and easy to clean.

This toilet paper holder looks great in our bathroom! It has a clean, modern look and only took a couple minutes to install. Fingerprints do show up on it somewhat, which might bother some people, but won't be a problem for us. We have it in a bathroom with chrome fixtures and it goes nicely, but it seems like it would also go well with brushed nickel.

I wanted to replace the old recessed holder because it got stuck with the larger rolls and this surface mount holder is perfect. It is high quality stainless which makes corrosion resistant and the finish is perfectly applied. It mounts with a bracket and a set screw and there are no screw heads visible. Easily installed and roll just slides in without having to compress the holder like the one t replaced.

We have a half bath in our mud room and we’re in the process of transitioning the fixtures in that area. We needed a simple, matte black, toilet paper holder for the half bath and this Ruiling Wall Mounted Single Arm Toilet Paper Holder in Stainless Steel Matte Black seemed like a good choice. When it arrived, I immediately noticed that it did not include mounting screws or wall anchors which contradicts what the product description says. I always have wall anchors on hand so it was not a major issue but they should have been included. Installation is simply a matter of screwing in the mounting plate and attaching the toilet paper holder using the hidden screw. You can choose to mount it facing left, right, or vertically which is a nice option to have. The holder is fairly light weight but it is definitely up to the task of holding toilet paper. This is a simple toilet paper holder but I would recommend it.

I love this toilet paper holder because you only need to use two screws for installation and refilling an empty roll is as simple as sliding the old one off and new one on. You don't have to worry about the tension rod failing over time and it provides a clean appearance. The stainless steel finish is nice and simple. The TP holder pairs nicely with our towel bar and towel hook.

Wall Mounted Single Arm Toilet Paper Holder in Stainless Steel Silver It can be mounted with left, right or vertically positioned. It is easy to assemble and hang. It has all brackets and hardware included. it is rust proof made of 100% stainless steel.. This toilet paper roll holder is very easy to install. it can be used for bathroom or kitchen use. It has appropriate size for daily paper roll or can be used as hand towel for the bathroom or dish towel holder for the kitchen. I use it for the bathroom. It is compact, lightweight, stainless. it is easy to install. Just two screws {not included} to mount on the bathroom cabinet side by the toilet commode by to mark the two holes to drill for the screw anchors then tap them in. Two screws to attach the bracket and then a single allen screw to attach the handle.

A nice looking and solid toilet paper holder. The unit goes well with the rest of the set. The unit has a single mounting plate allowing two screw to mount it. I would be sure to try to find a stud to mount to in order to give it a really solid mounting surface. The toilet paper holder attaches to the mounting plate with a single set screw. Could be mounted in either the horizontal or upright positions.

I got this particular toilet paper holder for a couple of reasons, the first being was to update or modernize a part of the bathroom that gets a lot of visits. This single arm design makes it easier to change out the role when it becomes necessary. The finish looks great and blends with many color schemes Installation was easy as the fixture comes with all necessary hardware

I decided to update my bathroom to make it a little bit more modern. Stainless steel fits the current decor of the bathroom so I went with this stainless steel toilet paper holder. When it came in the first thing I noticed was the weight of the product. I love the product and I am glad I purchased it. It is heavy-duty and as you can see from the pictures it is very modern looking and beautiful. The install was simple. Remove the bracket from the base and mount on to your wall using the provided hardware or hardware of your choice. Place the toilet paper holder over the bracket and tighten with the allen wrench also provided.

I selected this for a bathroom remodel we were in the process of completing. For a Simple and easy finish to a full and complete remodel this was perfect. It's compact, lightweight, stainless, finished in black and super easy to install. Just two screws to mount and directions that any novice could follow, even if you've never hung a single thing in your anywhere in your house.

This is a wonderful toilet paper holder. Golden color is quite upscale. It mounts easy with just two screws provided and locks in place with a small Allen screw. It is the same design I have found in Hotels. I tried most cleaners on this and found no damage. Harsh cleaners with abrasives is not recommended. You can also mount this in almost any position including vertical although horizontal is the norm.

Ruling's single arm toilet paper holder is a lovely design with a beautiful brass finish. Simple, clean design makes it an easy choice for a modern bathroom decor. The included mounting hardware made it easy to install with the pre-attached mounting plate. Just mark the location and screw holes, mount it and use the included allen wrench to tight things down. Love the design, love the brass finish!

These single-arm toilet paper holders always seem to have a problem with fly-away toilet rolls. But I'm giving this one a shot. It looks very stylish and was constructed well, very sturdy. I did have one fly-off roll so I downgraded the rating to "Good." It makes a nice addition to the bathroom, rather than the standard "blah" toilet paper holder. Just be careful when rolling or you might have a ravel.

No measuring required. Just use the mounting bracket to mark the two holes to drill for the screw anchors then tap them in. Two screws to attach the bracket and then a single allen screw to attach the handle. The main benefit is not having to get two individual mounts perfectly separated and level. The handle can be installed horizontal or vertical. I opted for vertical just for a different look. No wobbling and looks good with several decor styles.

Nice modern design, easy to install. Will go with modern bath fixtures. Works with multiple colors. Holds the toilet paper well enough. The matte black color goes very well with any style of decoration for your bathroom or powder room. Uses hollow wall anchors to hold it in place or you can to mount it to a stud if possible. Look for other accessories that are in this set.

This works out perfectly for our boat as we mounted it inside a bathroom cabinet door. I just had to go buy shorter screws as to not go through the cabinet door & of course they needed to be stainless for the boat. Two screws mount the hanger & then the holder clamps onto the hanger with an Allen set screw. Well made! Very sturdy. I ended up with the Allen screw on the top side of the hanger. I’m thinking now there is prolly a screw I can loosen & rotate the base so that set screw is on the bottom. I’ll try that next time I’m at the boat. Guess I should read the instructions next time! Nah…..

I had never seen an L-shaped toilet paper holder until we went on a trip this summer and as soon as we came home I was determined to change out all of our TP holders. That's not a project you brag about but it's one of those little projects that makes your day to day life just 1% better. The construction on this holder is a little cheap, the metal is thinner than I would prefer, but it's a good value. The lip at the end of the roll is large enough to keep the roll on, small enough to not be an issue during roll changes, and large enough to prevent the roll from falling off... so literally perfect. Installation is simple, there is a backing plate that gets screwed to the wall, and then the holder gets attached to the plate with a little hidden set screw. I'm not thrilled about the set screw (they always come loose) but that's pretty par for the course on bathroom fixtures. So far no issues with the finish but it's a little too early to tell if it will chip or rust.

Not crazy for this style holder. I prefer the spring loaded units. This one also is to narrow for the jumbo rolls of toilet paper. Other than that it has a nice finish , and is made of some pretty stout metal. Not that paper thin played stuff. It also comes with mounting instructions and mounting hardware. This has a clean modern look and is easy to use and install.

We needed a toilet paper holder and this looked good, we ordered it, it arrived in three days, well packed and in perfect condition. it looks well made and the finish looks great!! it is a basic install and all hardware and instructions are included, even a hex key to tighten it to the wall bracket. it is just what we wanted it looks great and we are very happy with it..

This is a very attractive toilet paper holder with a very nice stainless steel finish. It will go with all of our other fixtures and accessories. It has a very simple mounting bracket so anyone should be able to install this quickly and easily. I like the simple, elegant design and high quality finish. I think this is a good project for anyone to start with.

Although this paper holder is stainless steel, it has the look of a beautiful brushed nickle. It's lightweight and sturdy. Unlike some stainless steel products, this holder doesn't retain fingerprints all over it. It is easy to mount and comes with all necessary hardware to install. The only thing you would need is a screwdriver and/or drill. Because of the open end, replacing tissue on it is a breeze.

We got this toilet paper holder to match the other bronze fixtures in our bathroom. I like the single sided aspect of it, as it makes it so easy to change out the rolls. This is the big deal my wife says I a not very good at. So with this holder I have no propblem staying out of trouble with her. It is super easy to install. 2 Screws holding the plate on the wall and a set screw to place the holder. The base rotates which makes it easy if you do not get the mounting plate perfectly horizontal or vertical. Great looking as well!

I saw this toilet paper holder and it looked really easy to install and easier to replace the TP than the one I had. (Old style with the spring loaded tube) It only took about 5 minutes (tops) to install and works like a charm. It can be mounted horizontally (preferred) or vertical if necessary. Great addition to my bathroom!! I really like this item, now there's 2 more bathrooms to tend to!!

We have been modernizing our home and found the stainless steel single arm toilet paper holder gave out guest bath a more modern look. The holder is silver in color and was easy to install. The holder accommodates the jumbo sized roll of toilet paper, see image. The old holder did not work well with these larger sized rolls. It was easy to install and complements the bathroom accessories.

This single arm holder is a sleek modern style with a nice finish. Initially I couldn't decide which way to place this product on the bathroom wall because it looks great in all direction options. Once resolved, installation was easy. Even though proper hardware was included in the box, I used my own to ensure stability. If you are seeking a good value, this purchase is an easy decision.

I knew what finish to expect on this toilet paper holder as I previously ordered a set of the robe hooks from the same manufacturer to use as door pulls on a set of bi-fold closet doors. They have worked great and do not show fingerprints. There are also 12 and 24-inch towel bars available in addition to the two-piece hook set. Mounting is conventional—using mounting plates attached to the wall over which the fixture is hooked and held in place with a 2.5mm set screw. A short Allen wrench is provided, but the installation process will go quicker with a 9-inch-long wrench and even quicker with one with a ball-end. Since the TP holder is only supported from one side, there is a possibility that the base and/or post could rotate on the mount. In fact, after mounting the fixture horizontally, I was able to rotate the arm slightly. Upon disassembly—see photo—there is nothing to prevent rotation. I recommend that you tighten the 8mm nut securely to reduce the possibility of the arm rotating and you might want to put a lock washer under the nut. This is especially important for the single side mount toilet paper holder when mounted horizontally. The TP holder can be installed horizontally or vertically and facing right or left. By loosening the nut described above, you can rotate the base, so the set screw is on the bottom out of sight. The vertical orientation seems to work better for me at keeping the roll on the holder when you tear off paper and fixture rotation is not an issue. It can hold a 5-1/2-inch diameter roll. NEXT. The brushed finish is very uniform and is applied over a 304 stainless steel substrate. I have found that the finish on the hooks I already had has held up great. NEXT. All the hardware including the screws are stainless steel so they should last a long time. If you do a magnet test, you will find that the mounting plate and post base are both slightly magnetic which is due to a molecular change during the fabrication process. Toilet paper holder dimensions are 6.38 in. (L) x 1.97 in. (W) x 3.15 in. (D). Weight is 5.4 ounces. The bars is ¾-inch diameter, and the post is 5/8-inch diameter. The base is 1-15/16-inches in diameter by 7/16-inch high. The product is made in China.

It looks great! There's not a whole lot you can say as it does what it's supposed to do, it holds toilet paper. This replaced the old style holder with the spring rod in the middle which can be very annoying, especially in the middle of the night. I did take away 1 star as it doesn't truly fit the Costco / Kirkland brand rolls of toilet paper. It still works, but you won't have the new roll fully on the rod. It'll have to lay on the stopper so it can still roll. Once you use a bit, it can slide on the entire way. This isn't a huge issue & it doesn't affect function as it rolls just the same. Just make sure you install the rod opening facing away from you so it doesn't end up on the floor.

The ruiling wall mounted toilet paper holder is a simple design that looks great in almost any bathroom. It also holds the “mega roll” size toilet paper rolls. It is very easy to install and comes with stainless steel screws, hollow wall inserts, and the hex wrench needed to secure the holder to the base. Since the set screw should be in the downward position, the holder can be rotated in relation to the base by loosening

This toilet tissue holder is not fancy, elaborate or really unique in any way. It is just a nice looking piece that would look good in just about any bathroom. It is extremely easy to install and needs minimal tools (basically, just a drill will do) to do so. The only other tool needed is a hex wrench to tighten the brace to the wall and it comes in the bag. It also comes with the screws and anchors needed to mount it on a wall. With the open blade on one end, even a child could replace the tissue with ease.

Very solid toilet paper holder. Can be installed horizontally or vertically, if you have a small space. Installation is very easy, you have a little foot that you install, and then you use a set screw to put the arm onto the foot. Very simple and easy. If you use really thick toilet paper rolls, it will be a tight fit with a new roll. We use Cottonelle Mega Rolls, and I had to squish the roll to make it really round to get a new roll on.