#1 Home Improvement Retailer

Internet #206288136

Model #CM-2033R

Store SKU #1001490633

$5276
Apply Now
Pay $27.76 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Meter has a CAT III 600 safety rating
  • Features a solid structure with a rubber shell
  • Clamp meter has data hold, flashlight and temperature measurement
Store
0 in stock
Text to Me
caret

Product Details

Commercial Electric
Product Type
Features
Display Type
Dimensions
User Guide
Warranty
Illustrations may vary
The Commercial Electric Digital Clamp Meter CM-2033R features solid structure and rubber shell. The clamp meter features AC Current, AC/DC Voltage, data hold, back light, flash light and temperature measurement. The safety rating for the meter is CAT III 600.

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
caret

Specifications

caret

Questions & Answers

37Questions
caret
Q:Should this meter measure millivolts? My meter shows OL when I try to measure mV. Last one I tried another meter showed 447 mV but the Commercial Electric displayed OL.
by|Nov 14, 2022
1 Answer
Answer This Question

A:  Andy, Yes this device can measure millivolts. Ensure that you are in the correct voltage setting (AC/DC) as this meter is not auto detecting.

by|Nov 14, 2022
    caret
    Q:My 2033 meter shows 1.5 amp draw instead of 15 amp draw. Also for other amps over 10 it seems
    by|Dec 8, 2021
    2 Answers
    Answer This Question

    A:  John, Ensure that when you are using your clamp meter to measure current that you are holding it so that the wire you are measuring is in the center of the clamp between the two lines indicated on either side of the jaw. Also please note that if you are measuring current for a standard power plug you will not get an accurate reading of current due to hot, neutral, and ground being in the same area for measurement, you need to measure only one wire at a time. If you require additional support for your Commercial Electric 600A AC Digital Clamp Meter please reach out to Customer Service and ask for tech support: 1-877-527-0313.

    by|Feb 7, 2022

      A:  make that continuity on this meter much louder.....

      by|Jun 11, 2022
      caret
      Q:Non-contact voltage is tested for with the pointed tip on my ideal. Can you find voltage presence with the pointed tip on this meter? With my Ideal I could place the point against a wire or plug and push a button and it would beep if the area was Hot.
      by|Dec 2, 2021
      1 Answer
      Answer This Question

      A:  Bill, The Commercial Electric 600A AC Digital Clamp Meter does not have a built in NCV function. If you are looking for a product that does NCV detection, please look at our MMA-8301R or either our NCVT-8908R and NCS-8904R models.

      by|Dec 2, 2021
        caret
        Q:witch setting for testing for voltage
        by|Oct 21, 2021
        1 Answer
        Answer This Question

        A:  Douglas, To test for voltage make sure you turn the selection knob to the Capital V. They are the second and third option from the bottom of the selection knob rotary. If you need to measure Direct Current Voltage then you would select the function with a Capital V with a solid line with three dots underneath that solid line. If you need to measure AC voltage, then you would select the function with a Capital V and a sine wave (S-shaped line).

        by|Oct 27, 2021
          Showing 1-4 of 37
          caret

          Customer Reviews

          4.1 out of 5
          (194)
          • 4.1
            out of 194 reviews
          • 71%recommend this product
          Filter by:
          Showing 1-10 of 194 reviews
          Great for hvac2020
          Love it not the big great for the price works great
          by
            • Recommended
            1 found this review helpful
            Very Very Very Good For THE PRICE $
            Compared to the KLEIN CL2000 The Comercial electric lcd reads lower current and is pretty accurate
            by
              • Recommended
              13 found this review helpful
              Tests leads
              This meter is good for most general ac/dc needs. I personally do not like the short leads that come with the device. And for that, I'm giving a 3 star review
              by
              Response from Mastech GroupJan 18, 2023
              Dear Customer,
              The test leads have a protective cap on the tips that can be removed to expose more of the test probe. You can remove these tips by pulling them off like a pen cap. MastechGroup
              • Verified Purchase
              • Recommended
              This meter exceeded all expectations. It has a great thermocouple...
              This meter exceeded all expectations. It has a great thermocouple for measuring temperature as well as amps, volts, etc. Best birthday present that I ever bought my husband. When the electrician came, he had to use our meter because the Fluke that he had malfunctioned. Without our meter, nothing would have gotten fixed on that trip.
              by
              • Verified Purchase
              the settings pictures are small for my old eyes...
              the settings pictures are small for my old eyes
              by
              • Verified Purchase
              I am considering taking this DVOM back and getting a...
              I am considering taking this DVOM back and getting a refund. First, the ohm audio alert does not work no matter how much or little resistance I am dealing with - it is defective. Secondly, the probes have very short tips that do not allow me to get readings from an outlet - most DVOMs have longer tips. Thirdly, the ohm meter did not geve any reading when I tried to measure the resistance through a table lamp with a CFL bulb and of course I had the switch turned on. This is an over-priced DVOM for what I got.
              by
              Response from Mastech GroupDec 27, 2022
              Dear customer,
              If you would like any assistance with your 600A AC digital clamp meter, please reach out to our technical support line: 877-527-0313
              The test leads have removable caps that simply pull off of the tips, they may be difficult to remove the first time, but after that they should come off easily. Please ensure when using the continuity buzzer function that you select the Ohms position on the dial and then press the function button, after that you will be able to hear the continuity buzzer. MastechGroup
              • Verified Purchase
              Needed quick replacement
              The decimal point in volts and amps gets confusing until you get used to it. The test leads are a little shorter than most, no magnet on the back at all to let you work hands free from the meter. Important feature as I am in commercial Hvac. Other than that it’s pretty ok-ish
              by
              Response from Mastech GroupOct 11, 2022
              Dear customer,
              Thank you for the feedback, the test lead tips can be further exposed by removing the plastic tip over the probe, the plastic tip allows for a higher CAT rating, once those tips are removed, it is no longer rated for CAT III 1000V MastechGroup
                • Recommended
                Rating provided by a verified purchaser...
                Rating provided by a verified purchaser
                by
                • Verified Purchase
                Rating provided by a verified purchaser...
                Rating provided by a verified purchaser
                by
                • Verified Purchase
                Continuity volume too low
                This works for most instances, but the all-important continuity tester's volume is too low. Because of this, one needs to pick it up and hold it near ear in even less noisy environments and therefore is an issue when using both leads. Not sure why they designed it with such a low volume.
                by
                Response from Mastech GroupSep 12, 2022
                Dear customer,,
                The tone for the continuity tester is around 50 decibels, it can be easily heard in relatively loud environments, but some people may find it hard to hear in certain environments. MastechGroup
                  Showing 1-10 of 194 reviews

                  Frequently Bought Together

                  Top Rated
                  ++
                  Price:
                  $5276

                  Compare Similar Multimeters

                  current product
                  Top Rated600A AC Digital Clamp Meter
                  Clamp Meter Electrical Maintenance and Tester SetTop Rated400 Amp AC/DC Digital Clamp Meter, Auto RangingTop RatedHVAC Clamp Meter Electrical Tester Set
                  BrandCommercial ElectricKlein ToolsKlein ToolsKlein Tools
                  Name600A AC Digital Clamp MeterClamp Meter Electrical Maintenance and Tester Set400 Amp AC/DC Digital Clamp Meter, Auto RangingHVAC Clamp Meter Electrical Tester Set
                  Price
                  $5276
                  $6997
                  $9997
                  $11499
                  Ratings
                  (194)
                  (355)
                  (184)
                  (92)
                  Test Meter TypeClamp/MultimeterClamp/MultimeterClamp/MultimeterClamp/Multimeter
                  IncludedBatteries,CaseBatteries,Case,Test LeadsBatteries,Case,Test LeadsBatteries,Case,Test Leads
                  View ProductView ProductView ProductView Product