A: Please contact our team at email@example.com for further assistance.
A: Generally a 8/4 less than 50ft the max amp you would want flowing through the cable is 40 amps (4.8Kw) peak with a continuous load of 80% of that (32A or 3,840w). For lengths greater than 50ft however a 30A (3600w) peak or continuous 25A/3000w load.
A: Yes, this wire is rated for up to 600 volts, and at 50 amps. My generator makes 12000 watts, and this is the correct cord for that application.
A: I would call home depot. Looks like someone coded an error into the website (my opinion). Since the whole spool is 289ish dollars and 75 ft is about 60 dollars less
A: Inventory has been reloaded please trying your purchase again.
A: Richard, I think the issue might have been with not having enough inventory loaded to meet your desired quantity. The inventory has been updated for this item, please try again and let us know if the issue persists.
A: The outer diameter is just over 3/4 of an inch, 0.780 inches. You would need to measure the device to be sure but it is substantially larger than a half inch in diameter.
A: Not sure of you question but according to Allied Wire and Cable (AWC) the cable is nominally 0.78 inched in diameter. http://www.awcwire.com/part.aspx?partname=soow-8/4
A: Please consult with your local electrician. The above advice is based upon the current edition of the National Electric Code (NEC). Free access to the latest version of the NEC is available online at www.nfpa.org/freeaccess. The NEC and local building codes regulate the types of wire and cable that can be used in specific electrical applications, as well as the manner of installation. Check your local building codes before you start any wiring and cable electrical project and be sure to obtain required permits. When your work is complete, always have it inspected for compliance with local codes to ensure that it has been safely installed.
A: The four leads are all fine stranded, probably 30+ strands per lead... Benefit: This helps for flexibility if you needed to wind it around sharp bends like I had too... Caution: If you want the confidence of non-stranded current load benefits (solid copper), you might want to look at other choices! Food For Thought: Myself, I went with a higher load rating power cord than I actually needed, and enjoyed the amazing flexibility! (You will be totally surprised about the flexibility too, if you follow my Over-Rating advice:-)
A: These are solid conductors.
|Top Rated||Top Rated|
|Name||(By-the-Foot) 10/4 600-Volt CU Black Flexible Portable Power SOOW Cord||By-the-Foot 8/4 600-Volt CU Black Flexible Portable Power SOOW Cord||By-the-Foot 6/4 600-Volt CU Black Flexible Portable Power SOOW Cord||(By-the-Foot) 6/3 600-Volt CU Black Flexible Portable Power SOOW Cord|
|Total Wire Length (ft.)||1 ft||1 ft||1 ft||1 ft|
|Wire Cut Type||Cut By-The-Foot||Cut By-The-Foot||Cut By-The-Foot||Cut By-The-Foot|
|View Product||View Product||View Product||View Product|