Questions and Answers for BEHR PREMIUM 1 gal. #HDC-NT-23 Wet Cement Textured Low-Lustre Enamel Interior/Exterior Porch and Patio Anti-Slip Floor Paint

A:  Hi Gioco, thank you for your question. Our Porch & Patio Floor Paint is a stand-alone product that does not require a sealer. Additionally, we do not recommend applying our sealers near a pool deck as they are too slippery. Please feel free to reach out to us directly if you have any other questions. -Lina

A:  Hi KimL, thank you for your question. The Porch and Patio Floor Paint can be used on unglazed ceramic tile. The surface should be clean, and primed with the Concrete Bonding Primer No. 880. Good luck with your project! -Giovanna

A:  Hi there, thanks for the question. As it turns out the Textured Porch & Patio Anti-Slip Floor Paint isn't available in quart sizes. Have a great day! -Ronald

A:  Hi Jo - Thanks for your question! Our Porch & Patio Anti-Slip Floor Paint can be tinted to any of our paint colors or computer color matched to non-Behr colors. Click here to view some of the available colors: https://www.homedepot.com/s/Porch%2520and%2520Patio%2520Anti-Slip%2520Floor%2520Paint?NCNI-5. Best - Sara

A:  Hi Rg, Thank you for writing in. Priming is not required, but it can be done with Behr Concrete & Masonry Bonding Primer. We recommend etching the concrete with something like muriatic acid until it feels like 150-grit sandpaper and can absorb water rapidly. This will ensure proper adhesion. I hope this information was helpful. Please feel free to reach out with any additional questions you may have. Best of luck with your project! ~Doris

A:  Hi Roberto, Porch & Patio Floor Paint can be applied to a pool deck, but this application may shorten the coating's lifespan due to standing water. Please feel free to reach out with any additional questions you may have. Best of luck with your project! ~Doris

A:  Hi Roo - Thank you for your question. Our Porch & Patio Floor Paint is not recommended for garage floors as it was not designed to hold up to tire traffic. If your garage floor will not be driven on, we recommend etching the bare concrete and priming the surface with our Concrete & Masonry Bonding Primer before painting. If your garage floor will be exposed to vehicle traffic, you may want to check out our 1-Part Epoxy for your project instead (https://www.homedepot.com/s/behr%25201-part%2520epoxy?NCNI-5). Best - Sara

A:  Hi Emily, Thank you for your question. This product is available in gallon cans only. Best - Sara