A: If you're asking about the Store SKU #, then yes, it is the 112488.
A: No.
A: No.Go on Beamis.com and look at the # u put in
A: The bone has a darker color.
A: Bone
A: Yes
A: No
A: Nope.
A: Carole, Thank you for contacting Bemis Manufacturing. This model seat does not feature a Whisper Close hinge, it does feature an Easy Clean and Change hinge. For further assistance, please call our Consumer Care Center at 1.888.722.6488. Representatives are available from 8am to 5pm, CST, Monday through Friday, and will be more than happy to assist you. Kindest Regards, Bemis Customer Service
A: I have never had a problem with these seats. Bring it back to the store or maybe you are putting it on wrong.
A: There is no question. Just a statement. There should be two bolts and two nuts to hold the brackets to the toilet then the seat fits over the brackets and locks on.
A: I bought mine over a year ago and the hardware was perfect. I am still using it.
A: I came across this video on how to install this toilet seat. https://www.youtube.com/watch?v=i56HCg-Ld3A
A: That's too bad, and of course, a packing mistake is always possible! Take the hardware to Home Depot and ask the salesperson to compare it with what is packed with the units in the store. (I hope they'd exchange it for you on the spot). Before you do that, though, consider that you have to push really hard to get the "seat" side to fit down on the "toilet" side BEFORE you turn the "seat" side locking tops. I mean REALLY hard. I didn't, and the seat worked, but other users complained it seemed loose. It was! I finally got the trick but not till a few tries.
A: Jackie, Thank you for contacting Bemis Manufacturing. This seat features an Easy Clean and Change hinge, and this feature causes you to need to install the seat differently than a traditional style hinge. To install this seat you will need to attach the bolt to the toilet bowl with out the toilet seat. Once the bolt is attached tot he toilet bowl bring your seat over and have the caps to the hinges twisted to the left, place the seat on the bowl and push down on the hinges. The hinges will clip over the heads of the bolts. You are now able to wist the caps to the hinges back to the right, and your seat is installed.For further assistance, please call our Consumer Care Center at 1.888.722.6488. Representatives are available from 8am to 5pm, CST, Monday through Friday, and will be more than happy to assist you. Kindest Regards, Bemis Customer Service
A: The hardware is correct. To install this seat, follow these steps: 1. Place hardware, screw and wing nut, supplied with seat through holes in toilet as shown in figure 1.. Do NOT fully tighten at this time. 2. Place seat over mounting hardware as shown in figure 2. 3. Center seat over bowl and then fully tighten wing nuts it to bowl. 4. To secure seat to bowl, rotate seat covers as shown in figure 3. Hope this helps you!
A: I have not had any issue with odors.
A: Shirley, Thank you for contacting Bemis Manufacturing. We are very concerned about your comments. We would greatly appreciate the opportunity to speak with you directly and learn more about your experience, as this is certainly not typical. Please call our Consumer Care center at 1.888.722.6488 and reference CASE# 175534. Kindest Regards, Bemis Customer Service
A: Stinky Smell!!! Also bought elongated seat for condo. Bad order like dried urine in mstrbthrm. Took seat out & the odor disappeared instantly.
A: Please see link below from The Home Depot website- all dimensions included. https://images.homedepot-static.com/catalog/pdfImages/3b/3bedbbc8-8dd6-4099-9dc7-8dafd05f1237.pdf
A: This one is NEARLY 15.5 inches front to back & NEARLY 14.5 inches side to side.
A: The dimensions of all of the Bemis toilet seats are shown on the Bemis website. https://www.bemisseats.com/models/500EC http://images.salsify.com/image/upload/s--SNPxjPZP--/cqtrvoyjloy2zeynecsw.pdf
A: This seat is 14 1/2" X 15 1/2"
A: This should answer. Measured seat--lid closed--14 across by 16 down. Keep in mind the main thing, after the general dimensions, to worry about is the two holes in the back, which seem to be pretty standard. I'm no handyperson but this was an easy install, even for a first-timer.
A: Harry, Thank you for contacting Bemis Manufacturing. This models eat is a round size seat, and will fit most standard round bowls. Here is a link to the specification sheet for this model seat for your review https://www.toiletseats.com/docs/specification-sheets/bemis/500EC.pdf If you would need additional assistance, please call our Consumer Care Center at 1.888.722.6488. Representatives are available from 8am to 5pm, CST, Monday through Friday, and will be more than happy to assist you. Kindest Regards, Bemis Customer Service
A: Its dimension is 16.875 in x 14.375 in x 2 in.
A: Yes it stays up fine on ours.
A: Nat, Thank you for contacting Bemis Manufacturing. This seat and lid will stay open at a 90 degree angle even if there is not support behind the lid. For further assistance, please call our Consumer Care Center at 1.888.722.6488. Representatives are available from 8am to 5pm, CST, Monday through Friday, and will be more than happy to assist you. Thank you for your interest in our products. Kindest Regards, Bemis Customer Service
A: If angle = 90° yes. If angle < 90° no! Good quality. Made in USA.
A: SEAT IS GREAT AND YES IT WILL STAY OPEN ---- I WAS SURPRISED, can't go wrong!
A: Yes. It will stay up at 90 degrees with no support
A: I do not know about the prop 65 status of my Venetian pink seat, but I think it is a wooden based toilet seat that is then painted in some way.
A: viola, Thank you for contacting Bemis Manufacturing. We apologize for any concern or confusion that this is causing you. Unfortunately on some sites a proposition 65 warning will will be tagged, automatically to the seat because of one of the words that is used to describe the seat. All of our seats as safe and have gone through testing to ensure that the seats pass the proposition 65 criteria. For further assistance, please call our Consumer Care Center at 1.888.722.6488. Representatives are available from 8am to 5pm, CST, Monday through Friday, and will be more than happy to assist you. Kindest Regards, Bemis Customer Service
A: Deborah, Thank you for contacting Bemis Manufacturing. This seat is a round size seat. Here is a link to the specification sheet for this model seat, https://www.toiletseats.com/docs/specification-sheets/bemis/500EC.pdf. For further assistance, please call our Consumer Care Center at 1.888.722.6488. Representatives are available from 8am to 5pm, CST, Monday through Friday, and will be more than happy to assist you. Kindest Regards, Bemis Customer Service
A: Dimensions are shown on the Bemis website. https://www.bemisseats.com/images/spec-sheets/500EC.pdf
A: See link below for specifications. https://images.homedepot-static.com/catalog/pdfImages/3b/3bedbbc8-8dd6-4099-9dc7-8dafd05f1237.pdf
A: it will fit any standard toilet- not elongated
A: Awesome product
A: TonyTheTiger, Thank you for contacting Bemis Manufacturing. Please call our Consumer Care Center at 1.888.722.6488 and reference CASE # 158310. Representatives are available from 8am to 5pm, CST, Monday through Friday, and will be more than happy to make arrangements to send you new hardware. Kindest Regards, Bemis Customer Service
A: May have to contact the manufacturer.
A: No idea! I replaced the whole seat and the hardware came with it. It would be great, wouldn't it, if you could just get the screws when you need those only!
A: I buy new toilet seats when that happens. I buy a seat twice a year.