Questions and Answers for Bosch 14 Gallon Corded Wet/Dry Dust Extractor Vacuum with Automatic Filter Clean and HEPA Filter

A:  Hi there! The vaccuum doesn't have the motor that is measured by a horse power. The vacuum performance is rated in amperage (9.5a), capacity (9.0 gal) and CFM Air flow (150 CFM). For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  Hi there! The vaccuum doesn't have the motor that is measured by a horse power. The vacuum performance is rated in amperage (9.5a), capacity (14.5 gal) and CFM Air flow (150 CFM). For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  The Bosch VAC140AH vacuum is designed to work for dust extraction. If your grinder has a vacuum port that will fit the hose of this vacuum, then it will work. You may also use an adapter for the application. Kindly check https://www.boschtools.com/us/en/boschtools-ocs/dust-extractors-vac140ah-187453-p/ for the inclusion and what it works with. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from 7 a.m. to 7 p.m. CST.

A:  this is a bad vacuum I used 5 days and stop working , I sen to repair , they fixed, working a couple days more , and stop working again.

A:  The VX120 adapter included with the hose has a friction fit for 1-1/4" 1-1/2" tool ports. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  This VAC090AH has a sound pressure of 70dB. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  The best answer is, it depends. I have two DeWalt sanders. The hose fits my DCW200 1/4 Sheet Palm Sander (cordless) using the bag attachment but without the bag. It does not fit my D26453 RO Sander (corded). I have an adaptor that allows me to attach my Festool Dust Extractor to it but the outside diameter of the adaptor is a shade too large for the Bosch hose. The diameter of the Bosch hose is ID 0f 1-1/8" and OI is 1-3/8". These dimensions are approximate.

A:  Hi there! This VAC090AH vacuum needs an adapter for hoses that will not fit the port. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  According to the manual (page 15), the Amps required by the corded tool should be subtracted from 15-Amps and the Power Broker dial set to the difference. This works for things like sanders and the like but, in your case, it's a no-go. I have both my miter saw and a shop vac plugged into the same outlet and just turn the shop vac on first. You can also consider options like the iVac dust collector switches that perform the same function though they are pricey.

A:  Hi there! This VAC090AH has 9.5 Amperage which means it should work in a 30 amp breaker. If it doesn't work at all please call us. Kindly contact us at 1-877-267-2499 M-F 7AM-7PM CST.

A:  Hi there! Yes, the Bosch L-Boxxes can be stocked on the top of the VAC090AH vacuum. We haven't checked if Festool has the same clip to be compatible with the vacuum. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.