Questions and Answers for Delta Foundations 4 in. Centerset 2-Handle Bathroom Faucet in Chrome

A:  Hi! Thank you for your question! The seats and springs needed for model B510LF will be the RP44123 repair kit. The RP4993 seats and springs will not work for this model. Best Regards, Tim

A:  Look in the box in which the faucet was packaged. If you don't have it, go to the Delta website and look up the unit you have. The springs and seats will be listed.

A:  There is little the consumer can do to right this kind of problem. Contact the manufacturer with your concern, and let them help you resolve this issue. Delta should respond.

A:  After posting the question, I found a YouTube video. Had to take the valve out, coat the O ring with plumbers grease. Works fine now. I am surprised that I needed to do this with something that is relatively new.

A:  Hello, Thank you for contacting us. I apologize about the issue you are experiencing but am happy to help you. Please contact us directly as we would like to resolve this matter for you at this time. Best Regards, Tim

A:  Hello Sara, Thank you for your question. I will be happy to help you. The B510LF-PPU-ECO would require the sink to be a 4" Centerset. so if you are sticking with this faucet then yes, You would have to adhere to a 4" centerset sink. If you have further questions, please feel free to contact us directly. I hope that clears up any confusion. Best Regards, Eric

A:  No as long as you have three holes in the vanity and the spacing will accommodate the new faucet and handles you are using.

A:  IF you're replacing the vanity and sink you can go with whatever you want. Did you just want to ask a question or is this a real concern?

A:  No. You have many options to choose from. There are two lines to the faucet, one hot and one cold. They may be controlled by separate handles or on a single handle.

A:  Depends on how many holes your sink has. It may only have a single hole for a single lever faucet, or it may have three holes which can accommodate single or dual lever handles. Look under your sink to determine what your options are.

A:  Thank you for your recent inquiry with The Home Depot. Thank you so much for your service to our country! Home Depot supports our troops in many different ways, such as our volunteer and donation projects. We offer a Military Discount for in-store purchases of in-stock items and does not apply to online transactions. Please note that a valid Military ID must be presented at the time of purchase and the owner of the ID must be the purchaser present. We verify eligibility on each purchase to ensure all qualified Military service members and veterans receive The Home Depot Military discount. I hope this helps. We appreciate your business and look forward to serving you in the future. Thank you for your service to our country and shopping with us! -The Home Depot-

A:  Working hood

A:  Plastic but it has lasted for years

A:  This faucet is metal, and it is water saving. I like that it doesn’t splash all over if turn on all the way.

A:  Thank you for your question, AImz! Delta Foundations model B2511LF-PPU-ECO has a solid brass faucet body. Best Regards, Benjamin

A:  Yes, it is removable.

A:  Yes, it just unscrews with an ordinary pair of pliers. I installed a PUR water filter. Look for my review and see the picture I posted.

A:  Yes, the aerator is removable. As far as I am aware, all faucets have removable aerators, which must be removed after initial installation in order to flush out the water lines. This prevents trash in the lines from clogging the aerators. Of course, the aerators should be replaced after the lines are flushed.

A:  Hi! Thank you for your question! The aerator for this model simply unthreads counterclockwise from the end of the spout. We can't guarantee it can be used in combination with an aquarium cleaning system though. Best Regards, Tim

A:  Yep! Be real careful and don't use pliers!!!!!

A:  Yes it is.

A:  Yes but do not turn the water on with no aerator or other device installed or some water will flow through the housing and into the cabinet below.

A:  Yes, this faucet is a complete set and even included hose connections to the shut off valves, though depending on the age of your shut off valves, the sizes might not fit without adapters.

A:  yes and yes

A:  Thank you for your question, oliveoyl1936! This model will include a pop up assembly in a matching finish. Best regards, Edward

A:  Yep!

A:  Yes it has all you need including hoses, but you may need an adapter to connect to your shut off valves.

A:  Unfortunately, I don't know (and can't look because this is in another location); however, the connections are "standard" and should not require anything unusual; quite likely if you had the faucet fixture, a hardware store would point you in the correct direction.

A:  I think it's 1/2" NPT but not certain. Highly recommend buying the flexible supply lines when you purchase the fixture. Make sure the supply lines fit the supply shut off valves.

A:  What length or what size nut fittings ? Length depends on how are you are from your shutoff valves, measure that length and add at least 6 inches, I normally at at least a foot, so you are not stretching it. The nut size connecting to the faucet is 1/2 inch .

A:  I think the supply line was 3/8”, which I installed two faucets myself as the homeowner.

A:  That depends partially on what you have in your home. The faucet uses a standard 1/2" FIP connection. But the supply length and type of connection depends upon your specific situation, The last one I installed used a 3/8 compression on the supply line side with the 1/2 FIP to the faucet and 20". But some homes use other sizes and lengths. When in doubt, take one of the supply lines from your old faucet to HD to get the right connections. Also, the length of the old supply line and the new may be slightly different due to exact connection point on the new faucet.

A:  I don't see why not. It has nothing to do with the overflow hole.

A:  If you mean an overflow opening in the basin, then yes it will work fine. Has nothing to do with sink overflowing.

A:  I'm sorry. I can't believe a lot of these questions from women are real! WHAT does a faucet have to do with an overflow hole? NOTHING!

A:  Yes, the over flow drain is less common today but has no effect on operation of faucet.

A:  Diane, you've been given some wrong answers! A sink without an overflow drain DOES need a different sink drain than the one that comes with this faucet set or, at the very least, a different part. Google: faucet set for sink without overflow drain There are several places that sell the no-overflow sink drain kit. Or, ideally, ask a friend who has plumbing experience. You have probably already found this out .... I hope it wasn't the hard way! My brother replaced one of my faucets and he had to get a different part so I really DO know what I'm talking about.

A:  yes

A:  Yes you can repair this faucets internals as long as the corrosion and lime build up doesn't prevent you from getting the faucet apart without destroying it.

A:  Get a Delta faucet kit from Home Depot. Easy to do.

A:  Thank you for your question, Pete! Model B510LF-PPU-ECO does not have a valve cartridge. It has a Washerless ball valve, that has seats and springs. I have included a link to the model's parts breakdown, for you to refer to. Feel free to contact us directly, if you need further assistance. https://images.homedepot-static.com/catalog/pdfImages/89/897c4f4a-e607-4389-80a9-47a782456055.pdf Best Regards, Benjamin Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com| Facebook/Twitter: @deltafaucet