Questions and Answers for Delta Tub/Shower Diverter Rough-In Kit

They make 2 types, depending on the diverting options your installing. They have a three position and a 6 position, Deltas web site shows the different options and how they work. I installed the 3 position and it was fairly straight forward.

Hi, Jonny! Thank you for your question. The R11000 diverter body cartridge comes with the diverter trim kit. When you purchase the diverter trim kit, any trim kit that starts with the T118 or T119 trim kits, the cartridge will come with the trim kit. Best Regards, Rosanna

Delta T11851 Dryden 3 Setting Diverter, Chrome trim is my favorite. All of the Delta trim sets comes with cartridge.

This is three way valve. You can install it fill-in the tub and shower head or rain shower with hand held shower head.

Hi, Anthony! Thank you for your question. The R11000 will work with the T11959. We recommend to use the rain can shower head and the regular shower head. However, we recommend the tub spout not be installed with the diverter but install a diverter tub spout on the valve body. Best Regards, Rosanna

Hi Deen, The Delta R11000 is just the diverter rough in. You will need to choose your choice of 3 or 6 setting diverter trim. Best regards, Brandis

No. Later you need to install a cartridge. Maybe a shower head. Maybe a tub spout.

Dear Cuda, Thank you for your question. The Delta Diverter Valve R11000 is 3 3/8" (86 mm) and should be installed 2 3/4 +/-1/8" (70 mm) from the finished wall. Please see the Maintenance/Installation document link below, for more information. https://media.deltafaucet.com/MandI/70551%20Rev%20E.pdf Best regards, Tanya

Hello Cuda, Thank your for your question. PEX tubing can be used for any of the plumbing, except to a tub spout (if applicable). You will have to purchase and install adapters when using PEX. However, Delta does not manufacture any adapters for the connecting PEX to the R11000 diverter valve. Best regards, Tanya

I soldered PEX adapters but threaded adapters to PEX are also available.

Hi, Roy! Thank you for your question. The R11000 connections are 1/2". Best Regards, Rosanna

1/2 inch

Dear SheenRe, Thank you for your question. To complete a full Tub/Shower with Hand Shower install using the Delta Diverter Rough-In Valve R11000, you would also need the trim kits, main valve and hand shower. The Delta MultiChoice Universal R10000-UNBX is the main vale needed to connect your water supplies and tub spout, below the diverter valve. Then any style of the Delta Tub and Shower trims and Slide Bar Hand Shower of your choice would be everything needed for your type of install. All of our current available faucets are shown on our website at www.deltafaucet.com. https://www.deltafaucet.com/bathroom/product/R10000-UNBX Best regards, Tanya

Hi, 75Bound! Thank you for your question. To better assist you with this inquiry, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. We look forward to hearing back from you! Best Regards, Rosanna