A: Thank you for your question. OSI QUAD is not well-suited for acoustic treatments. This product is designed for exterior weatherproofing applications and while sealants can help to dampen sounds, it is not recommended for interior use or for soundproofing applications.
A: Thank you for the question. OSI Quad can adhere to bare aluminum window frames. We recommend conducting a test before use to determine suitable and acceptable results prior to starting a project. Keep in mind this product is for exterior sealing applications only.
A: Thank you for the question. OSI QUAD - White 001 is the color match for Vytec - Arctic White. You are welcome to visit www.ositough.com for available color matches by manufacturer.
A: Thank you for the question. Yes, once fully cured, OSI QUAD can be painted with latex paint or primer.
A: Thank you for the question. OSI QUAD Sealant can be used where siding/trim meets the foundation. The sealant is not meant to be in contact with the ground.
A: Thank you for the question. OSI QUAD Sealant can be used on James Hardie Board siding in exterior applications only. It should not be considered for use on any interior applications.
A: Thank you for the question. OSI QUAD is an all-season formula designed for use on exterior window, door and siding applications. This product is composed of elastomeric polymers and high-quality synthetic resins which upon curing form a tough rubber-like seal to resist outdoor weather-related elements.
A: Thank you for the question. OSI QUAD Sealant is not well suited for the intended application. This product is not compatible with plastics such as polyethylene and polypropylene. We recommend using a product specifically designed for your application.
A: Thank you for the follow up question. OSI QUAD is paintable with latex paint or primer, once it is fully cured. Cure time is 7-14 days, or longer, and the cure time range is dependent on temperature, humidity and depth of sealant applied.
A: Thank you for the question. OSI QUAD Advanced Formula Sealant is designed to seal joints not exceeding the maximum recommended joint width of 3/8 inch. The maximum joint depth should not exceed ½ inch without the use of a backer rod to control the joint depth. Please visit the website at www.ositough.com and review the product Technical Data Sheet for detailed information.