Questions and Answers for ROMABIO 1 qt. Tropea Beige Limewash Interior/Exterior Paint

A:  Hi Jo, Classico Limewash with the distressed or washed off aesthetic is an easy 3-Step process. See our Limewash page, https://romabio.com/masonry/limewash/ageless-beauty/ for more information and video tutorials. If you need further assist with your question, please email info@romabio.com to receive more personal attention and a detailed answer..

A:  Thank you Georgia for choosing Romabio and for taking the time to submit your question. For more personal attention and detailed answers, please email info@romabio.com.

A:  Yes, i did my entire house

A:  Inventory status as of 7/9/2021: We are managing the current challenges of raw materials as well as logistics with our goal to be in-stock on 99.9% of our products. However, with the delays we are facing as a whole, we do expect there to be some challenges periodically. Currently we are offering only the 1L size of Cristallo White Limewash on Home Depot Online. Thank you for understanding.

A:  No idea. 4 gallon was available as of yesterday

A:  Classico Limewash is formulated to be easily applied onto unsealed and unpainted brick, stone, or masonry surfaces. Check for absorbency on your masonry surface with water to see if it soaks up (absorbent) and doesn’t form droplets or sit directly on the surface (non-absorbent and will not work). Classico Limewash is formulated to continue to patina over time, adding to that antique limewash look. If you want a solid paint coverage that does not patina over time then Romabio Masonry Flat and Textured are both an easy, two-coat paint process. They are formulated to go on unsealed and unpainted brick, stone or masonry surfaces. For the following surfaces, Pre-painted Brick, Pre-painted Stone, Poured Concrete, Portland or Gypsum Stucco, CMU Block, Cementitious Board, and Wood, you must use one coat of Romabio MicroGrip Primer first, then apply the two coats of Masonry Flat or Masonry Textured as recommended in the Technical Data Sheet.

A:  Below is a link to our website on "How to Choose a Color" that will be helpful in choosing a color for your fireplace. https://romabio.com/choose-limewash-paint-color-home/

A:  Hello Vincent. We are told by designers that Romabio Classico Limewash in Avorio White - which is a neutral white - is complementary to Alabaster.

A:  I used on the exterior, but yes you absolutely have to dilute it with water. There are great videos on utube for doing fireplaces. I believe they used rags to wipe.

A:  Hello KrsitieQ. Dilution instructions are the same for interior masonry surfaces. For the interior, whether fireplace or accent wall, use a water spray bottle and clean white cloth to distress. For more information and video tutorials visit our website at www.romabio.com

A:  Hi Tyrone. Please do not use a regular primer with our products. They will not be able to absorb into the masonry surface afterwards. Please email info@romabio.com for more assistance.

A:  Make sure you clean "pressure wash" the project really well so the product can penetrate the pores. Youtube has some really helpful videos on projects that came out great. Also I'm sure the label gives directions also.

A:  Hi Tyrone. This is a great question for our customer service team because we need more information. Please email info@romabio.com. Thank you.

A:  Hello Dog. Classico Limewash is hand crafted with authentic slaked lime which means it can not be tinted dark. Our warmest and most tinted color is Tropea Beige. For more information please visit our website at www.romabio.com