A: Yes
A: Thank you for posting your inquiry. The White colored version of Tremco Vulkem 116 Sealant is available under Internet #202267309 / Model #7103009. Should you have additional questions or require further assistance, please visit https://www.tremcosealants.com/contact/ and complete the contact form to have a Tremco Representative reach out to you.
A: Thank you for posting your inquiry. The Tremco Vulkem 116 sealant would be an excellent choice the application as described (exterior application only). Should you have additional questions or require further assistance, please visit https://www.tremcosealants.com/contact/ and complete the contact form to have a Tremco Representative reach out to you.
A: Hi Bob, our Vulkem 116 Polyurethane Sealant in the color Buff is a medium tan color, similar to khaki. - Rust-Oleum Product Support 2
A: Hi Bob, our Vulkem 116 Polyurethane Sealant in the color Buff is a medium tan color, similar to khaki. - Rust-Oleum Product Support 2
A: It can be used for exterior and interior. Takes a full day to cure.
A: Thank you for bringing this to our attention! Rust-Oleum Tremco Vulkem 116 Polyurethane Sealant is intended for use on exterior surfaces only. Again, thank you for reaching out, and we will work to get this corrected on our end! - Rust-Oleum Product Support 3
A: My recommendation is to follow manufacturer's instructions. However i can tell you that i do whatever i think is ok, being mindful that this product is oil based and there are fumes to consider.
A: This is superior caulk. Lasts decades. It is designed for exterior use (meaning it can tolerate elements). There is no reason you cannot use it inside. It's not like its going to hurt you. It justs costs more as it is made to tolerate the elements.
A: Thank you for posting your inquiry. The Tremco Vulkem 116 sealant would not be recommended for application as described, as this formula is only recommended for exterior application. Should you have additional questions or require further assistance, please visit https://www.tremcosealants.com/contact/ and complete the contact form to have a Tremco Representative reach out to you.
A: Thank you for reaching out! Our Tremco Vulkem 116 Polyurethane Sealant is a joint filler designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints on concrete and window casement. For cracks and repairs on asphalt driveways, our EpoxyShield Blacktop Patch and Crack Filler would be a more appropriate product: https://www.homedepot.com/p/Rust-Oleum-EpoxyShield-1-Gal-Blacktop-Patch-and-Crack-Filler-Case-of-2-250700/205604818 - Rust-Oleum Product Support 2
A: Thank you for reaching out! Our Tremco Vulkem 116 Polyurethane Sealant is a joint filler designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints on concrete and window casement. For cracks and repairs on asphalt driveways, our EpoxyShield Blacktop Patch and Crack Filler would be a more appropriate product: https://www.homedepot.com/p/Rust-Oleum-EpoxyShield-1-Gal-Blacktop-Patch-and-Crack-Filler-Case-of-2-250700/205604818 - Rust-Oleum Product Support 2
A: Happy to help! Rust-Oleum Tremco Vulkem 116 Polyurethane Sealant is intended for use on masonry surfaces. If wanting to use on metal or plastic, a primer is needed. We want to hear more about your project and help recommend a suitable primer for your application. Please give us a call at 844-888-0482 to talk with us. - Rust-Oleum Product Support 3 8 months ago - by BRAND_ANSWERS_Rustoleum
A: Happy to help! Rust-Oleum Tremco Vulkem 116 Polyurethane Sealant is intended for use on masonry surfaces. If wanting to use on metal or plastic, a primer is needed. We want to hear more about your project and help recommend a suitable primer for your application. Please give us a call at 844-888-0482 to talk with us. - Rust-Oleum Product Support 3
A: Thank you for posting your inquiry. Tremco polyurethane sealants accept paints and stains, however the sealant must be fully cured before such applications. Coating over the sealant before it cures restricts and/or inhibits the sealant from curing and may also adversely affect the coating. Sealant cure time is dependent upon the size and shape of the joint, humidity, and the exterior temperatures, the colder the temperature, the slower the cure. A generally acceptable cure time at 72ºF and 50% RH is 7 to 10 days for polyurethane and latex sealants. It must be understood that Tremco sealants are elastomeric in nature, enabling them to extend and compress within a construction joint. Most paints are designed to be applied to hard, non-moving surfaces and do not match the elastomeric properties of sealants. Because sealants are soft and will extend and compress, if the paint film does not move in an identical manner to the sealant, the paint may crack and peel. Tremco makes no representations or warranties regarding the compatibility and/or adhesion of paint films to Tremco sealants. It shall be the responsibility of the applicator of a particular coating applied over a Tremco sealant to take whatever measures necessary, including testing, to ensure compatibility and adhesion of the paint with the Tremco sealant. Please contact Tremco Technical Service at 866-209-2404 or visit https://www.tremcosealants.com/contact/ and complete the contact form with any questions regarding this guidance.
A: Yes it is. Great stuff, best on the market!
A: Hi Ted, Tremco Vulkem 116 Polyurethane Sealant is paintable once the sealant has fully cured. It is recommended to test on a scrap piece first to ensure compatibility prior to use. - Rust-Oleum Product Support 2
A: Rust-Oleum Tremco Vulkem 116 Polyurethane Sealant is designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints. When using on metal, a primer may be needed. We want to hear more about your application to be able to further assist you. Please give us a call at 844-888-0482 to talk with us. - Rust-Oleum Product Support 3
A: Rust-Oleum Tremco Vulkem 116 Polyurethane Sealant is designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints. When using on metal, a primer may be needed. We want to hear more about your application to be able to further assist you. Please give us a call at 844-888-0482 to talk with us. - Rust-Oleum Product Support 3 9 months ago - by BRAND_ANSWERS_Rustoleum
A: Thank you for posting your inquiry. Tremco Vulkem 116 sealant is only appropriate for use in exterior applications. Should you have additional questions or require further assistance, please visit https://www.tremcosealants.com/contact/ and complete the contact form to have a Tremco Representative reach out to you.
A: Please consider the Loctite self-leveling polyurethane concrete product sold by Home Depot. It would settle nicely into the gouges without the need to tool it and make a bigger noticeable mess.
A: We appreciate your interest, Jeremiah! Rust-Oleum Tremco Vulkem 116 Polyyrethane Sealant is an excellent general-purpose sealant designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints. However, Vulkem 116 is approved for exterior use only and not intended for interior use. - Rust-Oleum Product Support 3
A: Thank you for posting your inquiry. Tremco Vulkem 116 sealant is only appropriate for use in exterior applications. Should you have additional questions or require further assistance, please visit https://www.tremcosealants.com/contact/ and complete the contact form to have a Tremco Representative reach out to you.
A: Rust-Oleum Tremco Vulkem 116 Polyurethane Sealant is designed for use on exterior applications but can be used on interior applications with proper ventilation. The depth of sealant may be equal to the width of joints that are less than 1/2” wide. For joints ranging from 1/2” to 1” (13mm to 25mm) wide, the sealant depth should be approximately one-half of the joint width. You will want to ensure the surface is dry at the time of application and allowed to fully cure. Please give us a call at 844-888-0482 if needing further assistance. - Rust-Oleum Product Support 3