Questions and Answers for Veranda Glendale 4 ft. H x 8 ft. W White Vinyl Spaced Picket Fence Panel with Pointed Pickets

A:  One complete panel comes in the box.

A:  1 section comes in each box (2 rails and the posts. Snap posts into rails) Easy job.

A:  Timj, One panel comes in each box.

A:  We do offer a 4x4 vinyl fence post concrete mount that installs posts to wood or concrete surface. Fits a 4x4 vinyl fence post, includes mounting hardware. Model # 144127.

A:  We do offer a 4x4 vinyl fence post concrete mount that installs posts to wood or concrete surface. Fits a 4x4 vinyl fence post, includes mounting hardware. Model # 144127.

A:  Thank you for reaching out regarding replacement pickets. For an exact match of the fence picket you are needing please contact our customer service department at 844-529-5882. Monday-Friday 7AM-5PM CST

A:  Yes , you can. 

A:  Hello RawkAngel, You are going to need some panels, posts, some brackets, and a gate. As you will need to make a few cuts to the panel, please note what the Installation Instructions state from the product page, "Adjust layout to accommodate as many full panels as possible. If you must use a partial panel, place it in the farthest rear corner of the property." We suggest that you speak with a Pro at your preferred Home Depot location to ensure that you purchase an adequate number of panels and the correct posts to meet your fencing needs.

A:  Hello Justin, We do not have that gate in a 45- inch size. You could always contact your Home Depot store to see if thise gate could be ordered in that size.

A:  Hi veranda brand The Homedepot.com does offer installation services for many items (including select fences) on Homedepot.com so please visit the Fence Installation Services portion of the Home Depot website at the link provided below to begin to view what options there are available for you and this particular project. The Home Services phone number is provided to you so that you may speak with a representative as well at the link below. Feel free to visit you local store for assistance if you feel that will work best for you. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot! http://www.homedepot.com/services/fence-installation/

A:  yes you can

A:  Hello Mmmmmm, The Chelsea Spaced Picket Vinyl Fence Panel can be cut to fit the desired panel length - whether it is just taking a few inches off the panel or cutting it in half, as you suggested. Be sure to leave at least 2” on each rail to ensure proper fit into the fence bracket.

A:  Hello Dave, Each fence panel is designed to be installed in a line or at a 90 degree corner. For that, you will need the 4 x 4 x 6 ft. post, Internet #205885449 and brackets. The brackets are model 116058. Install your fence per the Installation Instructions link located in the boxed-off section of the product page titled Info & Guides. Once that panel(s) is in place, you'll "turn the corner" and install another panel using brackets on a different side of the same post. Thank you for your inquiry.

A:  Dear Darlene, We do not offer a double gate for this fence. We do not have a warranty- approved way to do this; however, we have seen reviews/responses to other customer' questions on the same topic. It does seem that people in the DIY community buy two of the same fence panel, Internet #203008804, Model #128004, the Veranda Glendale 4 ft. H x 8 ft. W White Vinyl Spaced Picket Fence Panel with Pointed Pickets, joining them with a drop rod and possibly other hardware. We have seen a response in which the customer installed the Veranda 3.5 ft. W x 4 ft. H White Vinyl Glendale Spaced Picket Fence Gate with 3 in. Dog Ear Fence Pickets, Internet #204867120, Model #181981, removing both ends and connecting to a post or installing two with a drop rod between and a wheel. We have not tested any of these options and are not endorsing as you may experience sagging or other issues, but are simply sharing what others have put out there. Before trying any of these options, it seems like a bit of research would reveal some creative options for your specific gate needs. Best of luck to you in this endeavor. Sure would love to see an image of what you create.