Questions and Answers for Wagner Furno 300 Dual Tempurature Corded Heat Gun

A:  The top temperature this heat gun will reach is 1,100 degrees. The tip could burn something if the heat gun is held too close to it, which is why we suggest continuous movement. Also if the heat gun is held too close to something for too long it could blow the fuse on the heat gun. If you have further questions or would like to discuss this feel free to call us at 1-800-328-8251.

A:  Not sure if it gets to 1000 degrees but it definitely gets hot. I’ve never had any issues heating something’s with it. 

A:  Didn't actually measure the temperature but it gets really hot. It will burn surfaces when off before it cools down.

A:  Thank you for reaching out to us. While our Heat Guns are good for over 100 uses we do not test them in every situation. We suggest you use safety and caution when trying it on something untested. Please give our technical support team a call at 1-800-328-8251 and we will be able to assist you.

A:  Thank you for reaching out to us. The heat gun have to be attached with the power cord during usage. Please give our technical support team a call at 1-800-328-8251 if you need further assistance.

A:  No. It has to be plugged in to work. 

A:  Sorry, you cannot. 

A:  Thank you for reaching out to us. Furno 300 has 2 prong for the outlet. Please give our technical support team a call at 1-800-328-8251 if you need further assistance.

A:  It is a 2 prong (one wide blade and one narrow blade).

A:  4 ft ish

A:  Thank you for reaching out to us. The power cord is 6ft in length. Please give our technical support a call at 1-800-328-8251 and we will be able to assist you.

A:  Thank you for reaching out to us. Furno 300 is an excellent heat gun for shrink tubing. Please give our technical support a call at 1-800-328-8251 if you need further assistance.

A:  Should work if used carefully.  Has 2 settings.  

A:  I would assume you can use it to heat up anything , just start in slowly cause it gets real hot , I almost lit up stair treads 

A:  Thank you for reaching out to us. While our Heat Guns are good for over 100 uses we do not test them in every situation. We suggest you use safety and caution when trying it on something untested. Please give our technical support team a call at 1-800-328-8251 and we will be able to assist you.

A:  Thank you for reaching out to us. Furno 300 will soften up the glue on an old wall. Please give our technical support team a call at 1-800-328-8251 if you need further assistance.

A:  Thank you for reaching out to us. While our Heat Guns are good for over 100 uses we do not test them in every situation. We suggest you use safety and caution when trying it on something untested. Please give our technical support a call at 1-800-328-8251 and we will be able to assist you.

A:  Thank you for reaching out to us. Furno 300 is not hot enough to sweat copper pipe fittings. Please give our technical support a call at 1-800-328-8251 if you need further assistance.

A:  Absolutely NOT hot enough. You need a torch to sweat solder copper fittings. Newer solder with no lead needs a hotter torch than the old 50/50 lead-tin solder. Try a MAPP gas torch, hotter than propane.

A:  I’m not sure how hot that would have to be, but it will burn skin. I used mine to remove vinyl lettering from vehicles.