Questions and Answers for Zinsser Bulls Eye 1-2-3 2 Gal. White Water-Based Interior/Exterior Primer and Sealer

A:  Great question, Rich! Rust-Oleum Zinsser Bulls Eye 1-2-3 Water-Based Primer can be used on interior concrete walls and is considered to be a breathable coating. - Rust-Oleum Product Support 3

A:  Great question! While Rust-Oleum Zinsser Bulls Eye 1-2-3 Water-Based Primer can be used for most stains, we do not recommend it for water stains. Instead, we recommend an oil-based primer, such as Rust-Oleum Zinsser Cover Stain Oil-Based Primer. https://www.homedepot.com/p/Zinsser-Cover-Stain-1-gal-White-Oil-Based-Interior-Exterior-Primer-and-Sealer-3501/100398377 - Rust-Oleum Product Support 3

A:  We appreciate your interest! Since this is a water-based primer, we do not recommend Rust-Oleum Zinsser Bulls Eye 1-2-3 Water-Based Primer over wallpaper. If planning on painting the surface, we recommend removing any wallpaper prior to painting. - Rust-Oleum Product Support 3

A:  Happy to clear things up! For full durability, Rust-Oleum Zinsser Bulls Eye 1-2-3 Water-Based Primer must be topcoated with an opaque topcoat. Since the primer has fully cured, which takes 7 days in ideal conditions, you will need to either lightly sand the primer or apply a new coat. This will ensure your topcoat fully adheres to the primer. - Rust-Oleum Product Support 3

A:  Great question! Yes, Rust-Oleum Zinsser Bulls Eye 1-2-3 Water-Based Primer can be applied to previously painted surfaces, including drywall. Just make sure the existing paint is in good, sound condition and that anything loose is removed. - Rust-Oleum Product Support 3

A:  Great question, Ellin! While Rust-Oleum Zinsser Bulls Eye 1-2-3 Water-Based Primer can be used on most plastic surfaces, it is essential that any loose paint or material is removed from the surface prior to application. This primer will also not bond loose material to the surface. - Rust-Oleum Product Support 3

A:  Thank you for reaching out, Linda! The surface must be allowed to fully dry after raining before priming with Rust-Oleum Zinsser Bulls Eye 1-2-3 Water-Based Primer. This will be dependent on the humidity levels and temperatures. You also want to ensure that the relative humidity is below 85% when priming. - Rust-Oleum Product Support 3

A:  Great question, Glenn! Yes, Rust-Oleum Zinsser Bulls Eye 1-2-3 Water-Based Primer can be used on MDF and can be topcoated with a latex enamel paint. - Rust-Oleum Product Support 3

A:  Great question, Cindy! Yes, Rust-Oleum Zinsser Bulls Eye 1-2-3 Water-Based Primer can be used over polyurethanes. Make sure the finish is dry, clean, and in good, sound condition. - Rust-Oleum Product Support 3

A:  Happy to help, Chris! Yes, Rust-Oleum Zinsser Bulls Eye 1-2-3 Water-Based Primer can be used on pressure-treated wood. - Rust-Oleum Product Support 3