Customer Reviews for 15/32 in. x 4 ft. x 8 ft. 3-Ply RTD Sheathing

Marketed and ordered as plytanium, receipt says unbranded. I primed, and painted with 2 coats of paint and the first time it rained the layers separated. Absolute junk.

This is the worst quality plywood I have ever used. I bought 50 sheets for a project and the edges aren’t square. The thickness is the same knot aren’t filled. Garbage. Last plywood purchase at home depot wver. I would have saved money paying double somewhere else

Used ply for sub floor, worked great, easy install.

Worked perfectly for our plywood pallet dance floor :) Little thicker next time around but it worked & made for a good time.

Great material long lasting I use every time on my deck

Cheap bode wood not what I expected

Perfect for the shed roof! Heavy enough to not bend or bow while installing and so far (1 month) still looking good. Ask me in 30 years! HA!

Not sure if it's the proper application but I've used this to build a chicken coop for the floor, walls, etc. Seems to stand up to the weather well if heavily painted.

Thicker than the 11/32 that is sold in store it made great cabinet shelving in lower cabinets. Was going to double it up and use as countertop but decided to use the 2x12x8 that I bought at the same time.

Used it over 3/4" ply when replacing the subfloor in my house. It was installed about 2 weeks ago. After screwed down on a 12"x12" grid and vinyl plank flooring over it the top layer of the plywood blistered up between screws, in the middle of the sheet of plywood and popped the seam on the vinyl flooring. Its in the middle of the room of coarse. Had pull up the vinyl flooring and when that stuff locks together its together so we cut the veneer that peeled up flat and it appeared that there was very little adhesive holding the plywood together. Now we have a visible seam in the middle of the room because I cant get the vinyl plank locked back together and know I will tear up most of the other planks taking them all back apart to repair. Not pleased with the manufacturer of this plywood. I don't recommend this junk plywood for anything. I would have been better off putting down OSB.

You'll never get Board, excuse the pun. Gr8 product.

I use this product to make yard decorations

Used it to lay pavers down worked great I bet everyone reading this is wondering what I'm talking about anyways worked out real good

Great product i used it throughout my home

Good quality, pretty much straight Use underneath my bar kick.

This is good plywood I us this all the time

Works well as a light duty attic flooring over a garage

All we had to do was buy the material and our son covered our patio with a beautiful roof thanks to Home Depot's help to get all the right, gorgeous wood! Doesn't look like the same place!

Purchased 24 sheets. Had to return 6 sheets that where totally unusable. The rest wasn't much better. Very poor quality. Home Depot is the only supply house in Oak Ridge where I live or I would have gone elsewhere. Poor product caused extra work. Will plan ahead next week and purchase somewhere else. I have spent about $20000. In the last 90 days at Home Depot. Lumber is not one of their strong points.

Worked perfectly for the decking in my roof. Cut easily and replaced the rotted old deck boards from turbines and lifted nails. Would buy ag.

Worked really well with the nails and easy cutting.

I have been using this plywood for a long time and I am very satisfied with it!!

Perfect

Very good much less knots than the more expensive one

The wood was exactly what I needed. My floor is solid now and was easy to install my new tiles on.

Good price and excellent quality

I used this product to make my own hardwood floors (well, more like engineered wood I guess). I called in advance and had Home Depot cut about 10 sheets down to 5" strips on the panel saw. It was ready and waiting when I got there a few hours later. Then I sanded each board in my garage paying special attention to the edges. To install, I used wood glue on the bottom and 16 ga brad nails every 6 inches. When I was done, I used a gallon/4 coats of Mix Way Poly for Floors on the top. I used the Oil Based in satin. I have had them down for over 6 month and I LOVE THEM. LOVE LOVE LOVE.

Good product, but Home Depot is making it very difficult to login and our va.discount. some cashiers ask like they don't have a clue when we ask for the discount, even if they have our updated phone number. Please fix this. Veterans, are at a disadvantage here. Please show your appreciation for our service. I presented an honorable discharge. let make this country great. Give us a break.