Customer Reviews for BrassCraft 3/8 in. Female Compression Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Ball Valve

Exactly what I neeed. Thanks

Worked well for my application, I installed it on the end of of an existing faucet that leaked around the stem when turned off or on. I then attached a new flexible hose in between the new valve and the dishwasher replacing an old rigid 3/8 copper line that was leaking at the dishwasher hookup.

Rating provided by a verified purchaser

Used this valve to replace an old leaky valve that would not shut off the water. Just attach this valve to the old sweated on valve and leave the old valve open. The new valve can then be used to shut the water off.

Number 23. I use them down stream on every old valve for isolation. flush and back seat the old valve.

Brass craft is the best for this item.. Anything else will leak or crack old valve when tightened… We learned the hard way….

Great quality and price

Perfect solution to overcome old, "frozen", shutoff valves that were soldered too close to drywall to allow easy removal and replacement. Easy installation. Turn off main water valve. Disconnect feeder hose from "frozen" valve. Drain residual water into catch pan. Screw the captive nut on the BrassCraft valve to the threads where the hose was removed. Align the B/C valve for easy access to 1/4 turn shutoff handle. Remove the nut and compression sleeve from the B/C valve. Refasten the feeder hose to the threads on the B/C valve. Do not over tighten connections. Turn on main water valve. Check for leaks.

Rating provided by a verified purchaser

I installed 2 of these in the shower to be able to shut off the showerheads. They were easy to install. Easy to turn on and off with no leaks.

Excellent!!! I used it as a piggy back valve so I did not have to remove the old one and it worked perfect!

Had the wrong fitting on one end, will be returning...Colossal waste of my time

Rating provided by a verified purchaser

Had wrong fitting on one end, returned.

Had my kitchen faucet replaced and added these to help out when placing is needed

Great little valve. I have more confidence in this ball style vs. a gate style valve. The shape of the body allows you to easily hold the unit in place while tightening the compression nut.

Just exactly what I needed. Worked perfectly.

Did the job perfectly

Worked great, a little high on price.

These were super easy to install. I did it myself and I am not super handy. There was no leakage and it’s nice that they turn on and off with just a quarter turn.

Perfect, just what I needed. Why isn't this sold in store?

Rating provided by a verified purchaser

Just what I was looking for

Good emergency add on to a valve which is not shutting off properly

Excellent option to place a shut off in front of and in addition to an old shut off that may have stopped working properly may not shut off completely. Allows a quick additional shut off to a pre-existing faulty shut off that alleviates having to shut off the water to an entire building. Especially good for property owners with multiple units in the same location. Works great! Wish all stores carried this product as some locations do not have this on the shelf.

Rating provided by a verified purchaser