Customer Reviews for Carlon 8 in. x 8 in. x 4 in. Gray PVC Junction Box

Did have water get in . Causing wire damage and pump damage. Did not seal

Does the job.

We added 3 and 4-way switches and dimmers to our bedroom to make is possible to control the lighting and ceiling fan from either side of our bed in addition to the controls by the doorway. That required a total of nine 3-conductor #14 AWG cables; far too many for the conventional junction boxes available. This box filled the bill. I'm sure a 6"x6" would have worked, but this is big enough to make changes and/or additions easily. The mounting tabs are detachable, and allow you to rotate them 90° at the corners, or attach them to the middle of the sides, so finding a way to mount it, is very easy. The lid is sealed with a gasket and eight screws, making it capable of being water-tight as long as the fittings used are sealed. I didn't need that feature, but it's sturdy construction did lead to one problem, which I won't deduct from the rating, because most folks will use this with conduit rather than NM cables, as I did.. The wall thickness is more than most cable clamps can accommodate. I tried five different types of cable clamps without success AFTER I'd bored nine 7/8" holes in the box with a hole saw. My final solution was to use Male Terminal Adapters at each hole location. I then used PVC cement to glue in a PVC cable clamp. It was a snug fit without the glue and permanently welded once they were glued together. They're in the attic so don't have to be weathertight, but NM isn't suitable for outdoor use anyway. It isn't cheap, but was the nearly perfect solution.

Worked for what I needed

Your associate working in that area was so helpful. Not knowing exactly what i needed to purchase, he figured it out for me. Thank you for your help.

Excellent, heavy duty, quality product

Easy assembly. Covered all my cable connections. Looks clean and neat on side of my house.

Worked well, water tight.

The box did its job.

Easy to modify and install. Just what I needed to complete the project

It works fine on my electric project.

As far as grey plastic boxes go, this one is the cat's meow

The picture is not correct!

I knew what I was getting because I was replacing one that had been damaged by a blow of some sort. I really only needed the cover, which fit the old box perfectly. I wish one could buy the pieces separately ... but I've got a j-box ready for when that gets damaged, if it ever does.

good