Customer Reviews for Custom Building Products Aqua Mix 1 Qt. Nano Scrub Cleaner

works well

This product didnt do what I expected I would not recommend it

Did not remove black stains from the ceramic floor tiles

I followed the directions, it did not remove any dirt. I contacted Aqua Mix and confirmed I was applying it correctly. I was....they said if it does not work try baking soda!

I used this to clean up the finish on some carrara marble mosaic tile. Follow directions. Used a 3,000 grit pad on an oscillating tool. Finish is a little better than before I used the Nanoscrub, but it's not what you want.

This works really well.

Cleaned the grout perfectly. It looks brand new.

Works perfectly and removed grime and build up in the shower

It did the job perfectly. After application all grout haze and residue were all gone

Very good cleaner, some scrubbing required but not bad.

I do a fair amount of tile work as a contrctor. I just finished a marble basket weave floor. The grout did not behave well with the marble. The haze just wouldnt go away after many washes even with a little vinegar. I was very disappointed. I researched honing the tile surface, and came across this product. I used a 4” buff pad on a drill in slow motion. It only 30 minutes to buff a 50 sf floor to a beautiful polished marble shine with nano scrub. How did i not find this stuff a decade ago. This is a great product to keep on bard.

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Didn't work period! I even followed directions

This stuff is a life saver, I had scum all over my tile this took it off with a little elbow grease this is great stuff.

I followed the directions and watch the YouTube video. . I worked in small sections making sure every bit of the nano aqua mix was removed. Once my $2000 polished marble floor was dry I realized this removed my gorgeous Mapei black grout color. It is now gray and covered in splotchy white marks. I have been on my hands and knees scrubbing the grout lines trying to see if that will help. It didn’t help. Now I’m going to have to have the grout removed and replaced by my installer. I wish I could give this zero stars!

This was a shot in the dark. It says it is got textured tile which is very hard to deep clean. I’ve tried everything and this stuff really works. It takes some elbow grease put I may try an electric drill brush or fine steel wool.

Wow, worked very well for removing grout haze from my tiles. Wanted to try something that wasn't acid before resorting to that route so I got this. Used a stiff nylon bristle brush, and this stuff did the trick. My wife didn't understand why I was even cleaning them, she thought they looked perfect, until I cleaned them and then she saw the big difference! wonderful, highly recommended for grout haze removal.

Product did not clean as well as indicate. Clean-up was a nightmare. If you use this product on a tile and grout surface you have to use a wet vac to remove this product from the floor.

works well for most aplications. For mine, with extreme textures in tile not as good; but it DID help

this stuff is amazing for cleaning up your tile after removing the old grout and before you apply the new. made my old tiles look like new!

My handyman left a fair amount of grout on the surface of our new tile. We tried everything including grout haze remover but nothing worked. I used this product with a green scrub pad and it worked great.

This Product is thumbs up. It removed Urethane residue with a hydro sponge and a terry towel. I will always use this.If it can remove Urethane it will remove anything.

cleans grout residue nicely

I put in a very expensive white polished marble backsplash and did my best to avoid grout haze. Alas, the next morning...HAZE. Ugh. Got this stuff after reading reviews. Worked like a charm. Non-acidic so no etching or dulling. It removed the haze with moderate elbow grease and one of those nylon non-abraisive scrub pads. Didnt leave a single mark on the tiles. Juat make sure you take the time to thoroughly rinse/wash off the cleaner with plain water after; I found it took a few passes to get it all up. I towel-dried everything after to avoid water spots before sealing. There doesnt seem to be anything out there for marble so I was skeptical but i would definitely recommend this!

Had hoped it would remove sealer marks on pavers but it didn't.

The product did ok. I will have to use a second time as there was still a haze in parts after all dried.

Didn’t get the grout off!

I scrubbed the tiles after grouting with water and had pretty much the same result after using this product.

This is the worst product ever as it did not remove the sealant from my Travertine and left white powdery residue on the floor which was impossible to remove. When I applied the sealer again, it left spotches all over the floor. I wish there was a lower than 1 star available as I would give this negative rating if possible.