Very nice rod that was just as I expected. The diameter was correct and it cut easily to the length I needed for my DIY hand truck made from old wheelbarrow parts, lawnmower wheels, surplus lumber, and 1/2" diameter shaft collars. Would buy again.
by
Verified Purchase
Sep 6, 2023
Needed to find a way to support pendaflex folders in some new cabinets. I was able to cut this product to size and fit perfectly
by
Verified Purchase
Jan 25, 2023
Great
Product is just what I needed and as advertised. Had an issue during shipping and was resolved quickly and professionally.
by
Verified Purchase
Recommended
Apr 20, 2022
Need to carry more in store
Husband uses them to make golf club holders
by
Verified Purchase
Recommended
Dec 19, 2021
What’s to rate about a plain steel rod?
I cut it...
What’s to rate about a plain steel rod?
I cut it down to 3’ and pounded it into the ground, to hold up spiral Christmas tree decorations. It works and looks great. But, you can’t see the plain steel rod.
by
1 found this review helpful
Jan 16, 2021
another quality product from the Home Depot
I bought this to make a towel bar for my treadmill, which had no storage. It was easy to cut and worked perfect for my purpose. So far everything of this store brand has been good quality, no complaints..
by
Recommended
1 found this review helpful
Nov 13, 2020
Good bar. Works for my M151A@ Vietnam War Jeep...
Good bar. Works for my M151A@ Vietnam War Jeep
by
Verified Purchase
Jul 24, 2020
A bit overpriced, very oily (bring gloves to the store with you if you buy this), not especially ...
A bit overpriced, very oily (bring gloves to the store with you if you buy this), not especially round (might not work as a shaft material), but worked for my use (cut into small rollers to move a heavy lathe across a concrete floor).
by
Verified Purchase
1 found this review helpful
May 12, 2020
Was perfect for my gate...
Was perfect for my gate...
by
Verified Purchase
Recommended
2 found this review helpful
Apr 7, 2020
Good quality steel. Was very straight no dents.
Good quality steel. Was very straight no dents.
by
Verified Purchase
Recommended
1 found this review helpful
Aug 11, 2019
This is a plain hot-rolled steel rod, most likely close to A36 spec. Measured diameter is .366, ...
This is a plain hot-rolled steel rod, most likely close to A36 spec. Measured diameter is .366, which is pretty far off from the spec'd .375 inch. It has a rough pitted surface.
It is a basic piece of steel for general use. I would not use it in any project that had any mechanical load requirements. For example it would make a good axle for a small cart, and it's good in a pinch for making quick steel parts.
I chucked this up in my lathe to make a small non-critical replacement pin for another machine, and it worked as a functional piece. If you just need a piece of steel rod for a quick project, this will do.
I got this for use in doing some work on Christmas wire frame decorations that I build myself. T...
I got this for use in doing some work on Christmas wire frame decorations that I build myself. The size is appropriate for the wireframe light clips and it is easy to weld and stiff enough that whatever you build will not bend when it is moved around. Bending it is a challenge but it can be done. Obviously you want to paint something like this with multiple good coast of paint for use outside. And it needs cleaned well before painting. If you want to build something with no bends you can build something like a snowflake but that means more short pieces and more welding. I built a large tree out of rebar for the outer frame and I am considering putting a curved mouth on it with this with some smaller stuff maybe for the eyes.
Metal stock, such as this steel rod is useful for numerous projects. This rod can be easily cut ...
Metal stock, such as this steel rod is useful for numerous projects. This rod can be easily cut with a hacksaw and any rough edges at the cut line can be removed with a file. With a metal cutting lathe the rod can be reduced to a smaller diameter or otherwise fashioned to make custom parts. For attaching a small pulley a flat can be filed on the rod so that the pulley is locked in place.
Everbilt 1/4 in. x 72 in. Plain Steel Round Rod this rod bends easily in a bender or can be threa...
Everbilt 1/4 in. x 72 in. Plain Steel Round Rod this rod bends easily in a bender or can be threaded nuts when you need an extra long bolt that you cannot buy. The work great and also can be welded easily. Check the supply of Everbilt various metals rods and tubing at the hardware section at your local Home Dept store. If you don’t see what you want go to Home Depot.com and have it shipped free to your local store.
Everbilt 3/8 in. x 36 in. Plain Steel Round Rod These steel rods are easy to work with and threa...
Everbilt 3/8 in. x 36 in. Plain Steel Round Rod These steel rods are easy to work with and thread easy with a normal tap – die set. The rod can be welded as another alternative. Great for projects for the builder of the homeowner at any level of expertise. Go to your local Home Depot and check out the various rods, threaded rods tubing square and round in the hardware section.
This is a really strong steel round rod. I have trepidation just about everything to bend and hol...
This is a really strong steel round rod. I have trepidation just about everything to bend and hold this tree up straight and nothing I have tried has had the strength to hold it up without bending or coming up out of the ground. This rod wend straight in the ground and stayed straight even after staking the tree. It didn’t budge. I’m very pleased with this rod. This tree was transplanted by a gardener and never stood straight. Now it has a chance.
The "3/8 in. x 72 in. Plain Round Rod" is an excellent steel product that can be used in many pro...
The "3/8 in. x 72 in. Plain Round Rod" is an excellent steel product that can be used in many projects in construction and gardening. In my case I am using them to keep my young mango trees in a good growing position, flexible enough to allow the young tree to move with the wind and at the same time sturdy enough to provide an strong hold in the ground. They are also great with tomato plants, year after year.
I like and recommend them.
This well finished steel rod can be easily cut to size with a hacksaw or metal working bandsaw. ...
This well finished steel rod can be easily cut to size with a hacksaw or metal working bandsaw. It can be worked with a file, for example to create a flat for use with a pulley. It can be bent by securing it in a sturdy vise an using a length of steel tubing as a lever to make a reasonably accurate radius bend.
In its original form it has slight surface irregularities, but these can be removed with abrasive cloth, preferably by spinning the rod in a lathe or drill chuck. It then takes on a smooth and shiny finish.
I keep a selection of metal stock for future projects and this is a good addition to my collection.
Conveniently packaged in a three foot length for those small projects requiring a pivot or support. Shipped with a protective coating to inhibit rust, the nominal 3/16 inch (0.1875in.) actually measured 0.1850 inches, which may be of concern if you are fitting the rod to the ID of another piece. As long as the diameter is adequate for ones needs, this will be of use to the hobbyist or DIYer.
I have many uses for this Plain Steel Cold Rolled round rod. The purpose for these specific 1/8 inch X 48 inch rods are for use in my garden that is being prepared early for upcoming growing season. I also cut them and use as 16 inch stable rods to keep my hollow ceramic statues upright and in place in my yard that the squirrels and such does not tip over the statues. I have many and these rods are perfect for my needs. I am very satisfied. There are many uses for these steel rods. Just use your imagination. The sky is the limit. Two thumbs up!
I have many uses for this Plain Steel round rod. The purpose for these specific 3/16 inch X 36 inch rods are for use in my garden that is being prepared early for upcoming growing season. I also cut them and use as 12 inch stable rods to keep my hollow ceramic statues upright and in place in my yard that the squirrels and such does not tip over the statues. I have many and these rods are perfect for my needs. I am very satisfied. There are many uses for these steel rods. Just use your imagination. The sky is the limit. Two thumbs up!
1/8 inch by 48 in Plain Steel Cold Rolled Round Rod has a variety of uses for various craft items...
1/8 inch by 48 in Plain Steel Cold Rolled Round Rod has a variety of uses for various craft items... excellent for making model steel fence posts for dioramas, also can be used for making clay pot figurines. Easy to cut with a hack saw, or a bolt cutter. Cut end can be smoothed and/or round tapered using either a grinder or a belt sander. I usually paint mine with black spray paint for making model posts or if it is being used outside.
Purchased new outdoor shade for patio and mounting hooks didn't line up. Instead of drilling thr...
Purchased new outdoor shade for patio and mounting hooks didn't line up. Instead of drilling three new holes into concrete lintel, used 1/4 in X 72 in steel rod to mount the new shade using the current mounting holes and hooks. The rod is strong enough to support the shade with no bending. Exactly what we needed.
by
Verified Purchase
Recommended
1 found this review helpful
Oct 24, 2017
Works great as a wheelbarrow axle. Converted a 1 wheel to a 2 wheel wheelbarrow. Bought the wheel...
Works great as a wheelbarrow axle.
Converted a 1 wheel to a 2 wheel wheelbarrow.
Bought the wheels at HD too.
See photo...
by
Verified Purchase
Recommended
1 found this review helpful
Jun 27, 2017
The choice of this product was outstanding as it fit my use of it perfectly. This product replace...
The choice of this product was outstanding as it fit my use of it perfectly. This product replaced the original Simplicity tractor roller shaft on the tractors mower deck, which is no longer available... Slight modifications to the purchased bar were required.