Bought the 3 pack. The first one I used, while installing just bent up and was destroyed/mangled tightening it with a hand screwdriver. See picture. Amazing to me that that’s even possible with this style of fastener/drywall anchor. I’m a little disappointed and feel like a refund or replacement should in order.
by
Recommended
Feb 22, 2022
...
by
Verified Purchase
Feb 1, 2022
Great for ceiling tiles
These are awesome for hanging cameras on ceiling tiles.
by
Verified Purchase
Recommended
1 found this review helpful
Feb 5, 2021
Great to use
Great for mounting TVs and floating shelf. It holds very well amd i recommand it to all those that Install TVs on the wall
by
Recommended
Jan 15, 2021
Was not sure of the thickness need so bought the 1/4 and 3/16 for tv wall mount. Worked great
Was not sure of the thickness need so bought the 1/4 and 3/16 for tv wall mount. Worked great
by
DIY
Verified Purchase
Recommended
Jan 9, 2021
Mounting heavy objects, like TVs, on the wall is really secure when using these toggle bolts.
Mounting heavy objects, like TVs, on the wall is really secure when using these toggle bolts.
by
DIY
Verified Purchase
Recommended
Jun 9, 2020
I installed Grab Bars in a shower using these Toggle Bolts. They held great.
I installed Grab Bars in a shower using these Toggle Bolts. They held great.
by
Verified Purchase
Recommended
Jun 9, 2020
Great product! Very easy to use....
Great product! Very easy to use.
by
Verified Purchase
1 found this review helpful
May 12, 2020
Easy to use secures whatever you want to secure just a good product overall
Easy to use secures whatever you want to secure just a good product overall
by
Verified Purchase
Recommended
Apr 21, 2020
Needed to install 2 new light fixtures on wall in remodeled bathroom....decided the junction box ...
Needed to install 2 new light fixtures on wall in remodeled bathroom....decided the junction box might not be as strong to hold it up with those clamps you screw and tighten on inside drywall and I'd have difficulty installing two at the same distance from ceiling, I went with these toggle bolts. I had to drill an over-sized hole to get the spring toggle inside, but then able to tight up and ensure both lights were at same height before final tightening. By using four with the round junction attachment to the light, it is very secure. One light I used two as I was able to screw into stud.
by
Verified Purchase
Recommended
Jan 14, 2020
Definitely did the trick to hold curtain rods in place and secure shelving units to the wall.
Definitely did the trick to hold curtain rods in place and secure shelving units to the wall.
by
Verified Purchase
Recommended
1 found this review helpful
Dec 12, 2019
Works well holding up spice rack in hollow pantry door.
Works well holding up spice rack in hollow pantry door.
by
Verified Purchase
Recommended
Aug 4, 2019
Use these for larger mounting jobs. These use ¼” inch bolts and the toggle bots are pretty big, d...
Use these for larger mounting jobs. These use ¼” inch bolts and the toggle bots are pretty big, demanding a hole about ⅝” be drilled through the drywall.
The bolts are three inches long.
It is nice to see Phillips head drive on the ends as the older style using a flat slot were a pain to thread in with a power tool.
Shear load is 120 lb on half inch drywall and 85 lb on hollow block.
Made in China
EVERBILT 1/4 in. x 3 in. Zinc-Plated Toggle Bolt with Round-Head Phillips Drive Screw (10-Piece) ...
EVERBILT 1/4 in. x 3 in. Zinc-Plated Toggle Bolt with Round-Head Phillips Drive Screw (10-Piece) is a standard fastener for hollow walls. Toggle bolts have been around for a while and do a good job. They work in drywall and old construction lathe walls. I have lathe walls in my house and find them more secure than other types of fasteners. I've used a set of these size toggle bolts to hold up a large shelf filled with books for decades, still holding solidly. These Everbilt toggle bolts are standard and are no different from others. I've used. I've bought and used Everbilt toggle bolts at Home Depot before in their variety pack.
For those who haven't used them before, they are single use fasteners. Once they go in the wall they can't be removed without making the hole much larger so just push them in the wall, clip the screw and use another fastener, if needed. You don't need to over stress them to set in the wall. They have excellent holding power.
I have used these 1/4 in. x 3 in. Zinc-Plated Toggle Bolts with Round-Head Phillips Drive Screws ...
I have used these 1/4 in. x 3 in. Zinc-Plated Toggle Bolts with Round-Head Phillips Drive Screws in a (10-Piece) package for many years and they are about as handy of a bolt as you can get to secure towel racks and toilet paper holders and cabinets and many other things tightly to your walls . The package states they can secure as much as 120 pounds with 1/2 inch drywall shear and hollow block shear to 85 pounds . They are very fast and easy to install and will last for a long time .
i honestly can't say anything good about this product. It's literally made from the softest metal i have ever seen. the screw heads strip out the moment any pressure is applied to them. bolts don't hold well, and pulled back out through the drywall. just not pleased at all.
by
1 found this review helpful
Jul 19, 2018
These go in easy and can work in shallow walls. Our walls are 1/2" wallboard 3/8" tile and 1 1/2...
These go in easy and can work in shallow walls. Our walls are 1/2" wallboard 3/8" tile and 1 1/2" deep before we hit concrete. These work and hold well and are the best option for the job I had to do with the anchors. I used these to put in medicine cabinets and they hold well.
by
DIY
Verified Purchase
Recommended
May 9, 2018
This is awesome bolt. I used it to mount a 52inch and 60inch flat screen tv. I am very happy wit...
This is awesome bolt. I used it to mount a 52inch and 60inch flat screen tv. I am very happy with bolt.
by
Verified Purchase
Recommended
1 found this review helpful
Mar 21, 2017
An old fashioned type of anchor, but it's still better than a lot of the others. Maybe the only d...
An old fashioned type of anchor, but it's still better than a lot of the others. Maybe the only drawback is that you first have to drill a big enough hole through the drywall, so that the toggle bolt will fit thru. Especially good for the old plaster and lathe walls. Other types of expandable anchors can crack old plaster. But these don't expand within the plaster, they expand behind the plaster, then you snug them up.
by
DIY
Recommended
7 found this review helpful
Sep 18, 2024
by
Verified Purchase
Sep 18, 2024
I have only used the toggle portion to hand shop lights in my ceiling and they worked perfectly
by
Verified Purchase
Sep 18, 2024
by
Verified Purchase
Sep 18, 2024
by
Verified Purchase
Sep 18, 2024
Oldie but goody. Works perfectly.
by
Verified Purchase
Sep 18, 2024
My curtains kept falling regardless of what type of anchors used. These were awesome, no more falling curtains.
by
Verified Purchase
Sep 18, 2024
Worked perfect. Salesman told me exactly what to buy, took me to the location and explained how to use.
Thank you
by
Verified Purchase
Sep 13, 2024
Great product that give me confidence the curtains won't fall off the wall.
by
Verified Purchase
Sep 12, 2024
by
Verified Purchase
Sep 12, 2024
by
Verified Purchase
Sep 11, 2024
I never use those cheap plastic screw-in-sheetrock alternatives. They can't handle weight. These metal mollies can hold anything.