These are great to keep around the shop. I was welding two pieces of angle iron and as I welded the dimensions changed. So I tried a porta power, but it did not apply enough pressure. I decided that I could use a coupling nut and a bolt (preferably grade 8) and it worked great. https://www.youtube.com/watch?v=UHu89m4rWVQ
by
Recommended
Sep 27, 2023
Fully threaded 1.75 inchs long and 9/16 wrench for coupling. I used these to lock down my porch railing 4x4 supports using 3/8 threaded rod. The 3/8 threaded rods are load rated 5400 Lbs and the 4x4s were center-drilled up 12 inches, and a 1 inch side access hole allowed me to install a washer and a 3/8 nut. The 5400 lb load rating would easily strip out the nut, so I welded the nut to the rod inside the hole. Then I installed a 3-greased washer "compression bearing" on the rod end under the deck and installed these 1.75 inch threaded couplers as my securing nuts. The 1.75 inches of thread will withstand well over double the 5400 lbs that the rod is rated for. Beautiful installation with the deck rails mounted OVER the Trex Deck.
by
Verified Purchase
Jul 1, 2020
I needed to make a threaded spacer so I ended up cutting it in two seems, well made would recomme...
I needed to make a threaded spacer so I ended up cutting it in two seems, well made would recommend this if someone need to join to threaded rods together.
by
Verified Purchase
Recommended
1 found this review helpful
Jun 10, 2020
Worked well for the application. Good price.
Worked well for the application. Good price.
by
Verified Purchase
Recommended
Feb 20, 2017
Quality craftsmanship. Worked great in a wide variety of applications. These rod coupling nuts al...
Quality craftsmanship. Worked great in a wide variety of applications. These rod coupling nuts also come in handy when mounting accessories as they have more room to get a wrench on.
by
Recommended
Sep 15, 2024
by
Verified Purchase
Sep 10, 2024
I used this as Mini Jack Spreader Tool
These are great to keep around the shop. I was welding two pieces of angle iron and as I welded the dimensions changed. So I tried a porta power, but it did not apply enough pressure. I decided that I could use a coupling nut and a bolt (preferably grade 8) and it worked great.
https://www.youtube.com/watch?v=UHu89m4rWVQ
by
Recommended
Aug 28, 2024
Outside diameter is 3/4 inch. Most are 11/16 which are not as heavy duty as the Everbuilt.
by
Verified Purchase
Aug 22, 2024
by
Verified Purchase
Aug 15, 2024
by
Verified Purchase
Jul 31, 2024
Good coupling and good pricing
by
Verified Purchase
Jul 24, 2024
by
Verified Purchase
Jul 24, 2024
by
Verified Purchase
Jul 19, 2024
by
Verified Purchase
Jul 3, 2024
by
Verified Purchase
Jun 26, 2024
by
Verified Purchase
Jun 18, 2024
So Many Custom Uses
From threading two machine screws together ... threaded rod ... hard to get to nut applications .. the list goes on. My most recent use was creating a standoff between two metal plates for heat shielding. Work good ... hold up well. I always keep a few in my nuts & bolts bins for those "unforeseen" applications.
by
Recommended
Jun 12, 2024
Perfect for the job.
by
Verified Purchase
Jun 12, 2024
Good thread all the way through.
by
Verified Purchase
Jun 9, 2024
Great jack screw in a pinch
I needed a mini jack screw to level the bottom track of my pool. This, along with a 5/8" bolt did the trick.
by
Recommended
Jun 5, 2024
by
Verified Purchase
Jun 5, 2024
Fast Delivery! Excellent Product
by
Verified Purchase
May 22, 2024
by
Verified Purchase
May 8, 2024
Needed to extend a bolt for a project so I purchase these at Home Depot, Good quality material and threads on the inside work fine for what I needed it for.