Customer Reviews for Husky Folding Nut Driver Set MM (6-Piece)

I can't emphasize this enough. I don't like writing reviews, so for me to write this is huge, and I'm doing it to tell people NOT to buy this. I've used this set only twice and the second time the one end bolt came out and all of the drivers and washers fell all over the place. This is NOT a Husky or Home Depot problem. This is a design problem that spans many different stores. I've had folding Torx sets and folding hex sets. They all have one thing in common. They are terrible! When you fold them out and back in, you inevitably loosen the bolt or bolts holding everything together. Then you end up constantly tightening them after usage. If you're not conscious of it for a while it will just fall apart. You would think they could use some sort of a lock nut to prevent this but I've never seen it, and I won't start modifying a tool that I paid money for to work properly. I'd rather throw this in the garbage and start over because it's not a good tool to begin with. The second problem is how bulky the whole thing is. It's awkward to turn because you don't have a round handle and if you're working in a tight place, forget about it. Live and learn. Please, if you are considering this....reconsider. There are better options.

The only issue I have with this nut driver set is that the drivers are shallow. I wish they were deeper so that you were able to drive the nut deeper. I was adjusting a couple of nuts on a table leg that have been giving me some turning issues. And after they were driven so far back I had to use another wrench. One side of the nut driver is a bit tight and the other side is a bit loose, but you can adjust it with an L wrench. You can also use the driver at an angle or as a straight tool. I love this thing. Might get one for my dad.

This is 5” long 1 1/8” wide 1 5/8” thick and weighs 11 and 7/8 oz The longest driver sticks extends 2.5” past the end of the holder. There are 6 sizes, 3 on each side. They are: ¼, 5/16, 7/16, 3/16, 11/32, and 3/8. The drivers on the one side (1/4, 7/16, 5/16) move smoothly but are stiff. The drivers on the other side (3/16, 11/32, 3/8) swing freely without exerting any pressure. If you hold it vertically, they will swing down of their own accord. The sizes are stamped on the shank of each driver and are difficult to see as the shanks are very shiny. The drivers swing all the way around to either side of the holder. It's easy to hold and use and conveniently sized, especially for a toolbox or glove compartment.

This is 5” long 1 1/8” wide 1 5/8” thick and weighs 11 and 7/8 oz The longest driver sticks extends 2.5” past the end of the holder. There are 6 sizes, 3 on each side. They are: ¼, 5/16, 7/16, 3/16, 11/32, and 3/8. The drivers on the one side (1/4, 7/16, 5/16) move smoothly but are stiff. The drivers on the other side (3/16, 11/32, 3/8) swing freely without exerting any pressure. If you hold it vertically, they will swing down of their own accord. The sizes are stamped on the shank of each driver and are difficult to see as the shanks are very shiny. The drivers swing all the way around to either side of the holder. It's easy to hold and use and conveniently sized, especially for a toolbox or glove compartment.

Like this tool. Easy to place in my tool belt bag and includes most common sizes which saves me time. No more searching around tool box for needed size,with this handy thing just grab it and most of the time your covered.6 common sizes which fold out when needed and the body acts as a handle to twist off or tighten. I like Huskey tools, they offer a quality product at a fair price.

This Nut Driver Tool by Husky is a great product with many uses. This tool keeps all these nut drivers in one place with the folding feature. This is a metric tool (companion SAE tool is available) with sizes 6mm-10mm, and 12mm nut drivers. This Tool is great for appliance repair, product assembly, auto repair...or anytime you encounter small metric nuts, bolts, machine screw heads. Its great to drop this in your tool bag and know when you need small metric that all the standard sizes will be there. It also comes with a life time warranty.

Nice compact socket set But I needed a larger socket. May return . Not sure yet

Nice tool for your edc pouch!

Really only useful for turning heads, which are readily accessible such as on the face plate of a appliance or other surfaces. Anything recessed it starts to get very difficult to both turn and access ahead of the screw or bolt.

Unfortunately, the drivers try to slide closed while it's being used, so it's awkward.

Well made, opens and closes smoothly. Seems convenient to use if you don't need lots of torque.

Broke the first time I used it

Handy too for the tool box!!!

Also a handy tool for the toolbox!

The product has limited space to work with. It need to take all the sockets out to unscrew the screw or nut. Just use a regular socket. It is more efficient. Not recommended to buy it.

This tool took the place of several other tools we kept as a backup on our DRZ400s. Appears to be made very good.

Shaft is to short, couldn't get the bolt loose.

Fatal flaw: you can't easily use it without being able to tighten the screw that keeps all the drivers except the one you want to use closed. The other drivers will be flapping around while you're trying to concentrate on turning the nut. As a handyman plumber, I usually have no use for a torx set under a sink, in a crawlspace, or under the hood of my truck so having to have a torx handy is a non-starter.

Sometimes deep sockets are required.