Cuts great. Fit my Milwaukee M12 saw perfectly. ...
Cuts great. Fit my Milwaukee M12 saw perfectly. I will continue to buy this blade as needed.
by
Verified Purchase
Feb 23, 2023
They brake really fast compared to other brands they cut...
They brake really fast compared to other brands they cut good tho nice on copper and iron pipe they work well
by
Verified Purchase
Feb 12, 2023
by
Verified Purchase
Dec 15, 2022
by
Verified Purchase
Dec 14, 2022
Does what it says it'll do. This blade is for...
Does what it says it'll do. This blade is for thin metal. It's great for EMT but not so much all thread or rigid
by
Verified Purchase
Dec 7, 2022
by
Verified Purchase
Nov 29, 2022
by
Verified Purchase
Nov 10, 2022
Love this Milwaukee saw, but the blades are disappointing, not...
Love this Milwaukee saw, but the blades are disappointing, not sure if I got a bad batch or what. I cut rebar with it. Blade cuts great at first, but after about 10-12 cuts the blade is completely dull and will not cut anything. This is not only very expensive, but time consuming to keep changing the blade so often. I had to grinder with a cut off wheel to finish because I ran out of blades. Hopefully this is improved.
by
Verified Purchase
Nov 9, 2022
by
Verified Purchase
Oct 26, 2022
Dulled all blades in 15min
Bought these to replace the blade that the bandsaw came with. The original one lasted over a year cutting everything from strut to 1 5/8 copper tube. The new blades all went dull within 15 minutes of trying to cut a piece of all thread. Total garbage and a waste of 30 dollars that I now have to figure out if I try Milwaukee blades again and hope they last or find something else.
by
Response from Milwaukee ToolOct 26, 2022
Hi Justin- We are sorry to hear you did not have the best experience with your band saw blades! Could you please send our team an email at social.media@milwaukeetool.com, so we can best assist? Thank you -Social Team
Oct 19, 2022
Cut through fencing pipes like a hot butter knife!...
Cut through fencing pipes like a hot butter knife!
by
Verified Purchase
Oct 5, 2022
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Oct 5, 2022
I would buy again
I bought a 3 pack and the first blade I used wouldn’t cut anything!Turns out the teeth on it were cut in the wrong direction!
Luckily the other 2 blades were good and cut 3/8”tubing effortlessly.
by
Response from Customer CareOct 6, 2022
Hi Awning Joe- We appreciate you taking the time to share your experience! We will send you a follow-up email shortly. -Social Team
Customer review from milwaukeetool.com
Sep 25, 2022
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Sep 12, 2022
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Sep 10, 2022
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Sep 9, 2022
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Sep 2, 2022
by
Verified Purchase
Aug 24, 2022
Really good quality and the item arrived on time....
Really good quality and the item arrived on time.
by
Verified Purchase
Aug 10, 2022
Never again
Electrical contractor cutting 3/4 - 2 inch emt.
M12 compact fuel bandsaw is absolutely garbage. Brand new Milwaukee blades 12/14 tpi burns out on one cut thru the 3/4 emt. If I could get my money back I’d do it in a heartbeat. Suprised it even gets thru PVC
by
Response from Customer ServiceAug 10, 2022
Hello Solarguy22 - We appreciate your honest feedback! We will be contacting you via email for more information!
Customer review from milwaukeetool.com
Jul 19, 2022
Cast iron beast
As a plumber I use these blades for cast iron drain removal. Blade life far exceeded my initial expectations! Yes, I go through them, but it beats a soil pipe cutter in a tight crawl space.
by
Recommended
Customer review from milwaukeetool.com
Jul 10, 2022
by
Verified Purchase
Jul 2, 2022
Not Extreme
This blade comes with the tool. Used it to cut 1-1/2" galvanized pipe because there were no other blades were in stock for this bandsaw. I didn't even finish the first cut because the blade became dull so quickly. So I had to grab the carbide sawzall blade to finish the rest of the cuts. That first cut had to be with a bandsaw because I had to minimize the vibration on the cut. The only extreme part of this blade is the dullness.
by
Response from Milwaukee ToolJul 14, 2022
We are sorry to hear about this experience with your band saw blades. Could you send our team an email at socialmedia@milwaukeetool.com, so we can look into this? Thank you -Social Team
Jun 30, 2022
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Jun 30, 2022
by
Verified Purchase
Jun 22, 2022
by
Verified Purchase
Jun 22, 2022
by
Verified Purchase
Jun 19, 2022
The blade was really easy to assemble. Great product...
The blade was really easy to assemble. Great product