Customer Reviews for Oatey 1/4 in. PVC Toilet Flange Spacer

I need a spacer to get flange to tile height. Since I re-did the entire setup, I am using a new flange also. I want to place spacers on the tile backerboard so I can get to tile height without having to screw thru the tile. Drilling pilot holes thru porcelain tiles is not easy, so using the spacer is the preferred option. This also eliminates any concern of a broken PVC spacer when using a flange with SS ring. The PVC spacer will not see any stress other than being pushed straight down. Two issues with this item. I am using an Oatey flange with SS ring which has screw holes, as does the spacer. Except that the holes do not line up at all. Same brand, same # of holes, but only 2 line up. Brilliant job Oatey. Second issue is this will not fit underneath the Oatey flange, only on top. This is not stated anywhere that I can find. I would return, but since my HD has zero other options, I am stuck modifying this flange if I want to get this toilet installed quickly. PVC quality is good and set on top of flange well, but screw holes would still need to be modified.

Excellent product but check the closet bolt pattern in your existing flange. Toilet flanges have cut-outs to accept the head of the closet bolt. You then slide the closet bolt to a narrower portion of the slot in the flange that keeps the head of the closet bolt secure when securing the toilet. Some toilet flanges require the bolts to be moved in a clock wise direction (and this spacer will work quite nicely with those flanges). Other flanges require the bolts to be moved in a counter clock-wise direction which could be problematic if you ever needed to remove your closet bolts. Just line up the space with your flange to make sure everything lines up - especially closet bolt slots before installing. The product itself is strong and well made. I picked this up to use in a bathroom where I removed the old tile floor and laid down under floor heating before installing the new tile floor. This flange gave me the height I needed for the increased height of the new floor.

Working on a home that the toilet flange is lower than the flooring and this spacer did the trick. It’s pretty much self explanatory but i did have some difficulty lining up the holes to the actual flange. But in the end it worked out. It was pretty easy to install Just some silicone between the flange and the spacer and screwed it down. The 1/4 inch thickness was exactly what I needed to raise it above the flooring a bit. PVC material it’s made of seems pretty solid and when I screwed it down and finished the install I felt good it held up good to any tightening I did. Good product and i had no leaks. I’d recommend it to anyone with the flooring being higher than the flange.

I needed to raise my toilet flange up because it was sitting below the tiles. When I installed a new ceramic tile floor. The flange should sit on top of the tiles. I went to Home Depot and picked up a Oatey 1/4 in. PVC flange spacer. The spacer is white in color and 7 in. in circumference and has 6 anchor holes to secure the spacer to your original flange and subfloor. This spacer is really durable PVC and made very well. I cleaned the existing flange and used silicone between the flange and spacer and then I screwed it to the floor. The manufacturer recommends using no more than 3 spacers per application. I want to let you know this spacer is not a toilet flange. If I called a plumber in to fix this, he would have wanted to cut the waste line and extend the pipe and install a new toilet flange. This would have been very expensive. Thanks Oatey I enjoyed using the 1/4 in. Flange spacer. It was a breeze to install. This Oatey spacer will save you time and money. I recommend this product if you run into the same problem I did with the floor.

The item I purchased in the store was not the item pictured. It was similar and by the same company, but it did not have the proper slots to make installation easy. It worked, but it was much harder than it needed to be.

Used 2 of these to raise the flange to the correct height. Worked perfectly.

This is a very simple, inexpensive, and effective means of correcting toilet flanges that are too low.

This offered the additional height needed to match up to my tile.

It did what it needed to do flange and wax seal 27 bucks after tax and fixed my toilet.

The pictures spacer flange is not the actual purchases item.

Our floor was raised over a half inch. The spacer raised the flange to the proper height. I recommend caulking the spacer to the existing flange and using “Blue Monster” closet bolts. These closet bolts come with two sets of nuts and washers each, which gives you the ability to lock the spacer onto your original flange before you reset your toilet. I have used these products many times in my career as a plumber.

Good quality flange. Party is the leader in PVC fittings and rightly so

Great, easy to install and use. Does exactly what it says it supposed to by lifting the toilet that little bit extra that is neede

The product is good, however I returned it as it didn’t quite meet my requirements

Good product and recommended

Worked fine. No issues

It won't work with a offset closet flange without having to cut it. Other than that it will do the job well.