Customer Reviews for PC Products PC-11 1/2 lb. Paste Epoxy

Used to repair freeze damage on a pottery fountain. Worked perfectly.

I needed just the right glue for a special project. I had to glue brass to glass, and brass to a shell. This epoxy holds is stiff enough to hold its shape, won't run, so you can glue vertically, and has a long enough setting time to allow for precise work. You can also clean any excess with alcohol.

good stuff

My first attempt using this stuff failed. I tried to bond two different plastics---it stuck to one and kind of stuck to the other. This product takes more than 24 hours to cure. At 24 hours, my repair was still soft and flexible. Also at 24 hours, Krylon would not adhere to it. It would not be sandable, drillable, or machinable for quite some time.

This paste epoxy was easy to work with, has a nice non-shiny surface and it's almost white in color. I used it to cover small foundation crack around a basement window.

I chiseled out a cast iron toilet flange & wanted to prepare the area around the drain pipe for attaching the new PVC toilet flange. I used this epoxy to not only provide solid support for the pipe, but also a solid material to attach the flange bolts.

This epoxy did just what I wanted it to do. It mixed well, was easy to apply, and is still holding. You do have to work fast. I would use this again.

I used this product on a vertical surface as advertised and it worked. No sag or drips, it is amazing stufff. I would recommend it to anyone needing an epoxy. Put it on the outside transom of an old Snark sailboat I bought. Spread a coat of epoxy. Then squeeged in some fiber glass cloth and another top coat and let dry. Just wear gloves. It is some sticky stuff.

Purchased to repair a large crack in a Corion countertop. Bonded well. Did not dry as hard or as fast as described in the ad. Did not sand as smooth as I wanted. Jury is still out on whether or not it will retain its snow white color over time.

No problem mixing the products. Stays in place while harding. Easy to work with.

Dried underwater and remained white so that it matched the grout around the pool tiles.

Used in a marine application for small fishing boat flooring. Strong and just flexible enough to be perfect for the application. Set time was good for the length of time it took to apply in all the places needed.

I bought this to repair a vase and it was impossibly sticky. It stuck to my hands, my kitchen counter, and every part of the vase besides the section I was repairing. I thought that I could fill and sculpt the broken areas but that was out of the question, the material was uncontrollable. I could see this possibly being a construction adhesive but it cannot be used for fine work.

The sole of my not-so-old hiking boot came off and this worked great in reattaching it.

Was easy to mix together and made strong epoxy bind

Just what I needed! Recommend!

Works great. Stops the lavatory drain pipe (no pressure) leak from a snapped 1-1/4" pipe at the bottom pop up assembly. Holds well. Off white color when cured. Looks - not so great. Not smooth because the mixtures are thick so they do not run when applied. Conclusion = worthwhile epoxy chemical for water repairs.

Delivered earlier than said date.

Great product. Easy to use, fills gaps, connects various materials together, no odor, 24 hour cure. Solid stuff.

Product worked very well,was easy to mix and had a good amount of working time.Used to patch holes in a metal building,adhered to the metal walls and roof without any problems.Sanded down smooth and can’t see the holes after painting.I would recommend this product,it’s great and i would definitely buy it again.

The PC-11 seems to work fine. It mixes to a thick 'peanut butter' consistency, and can be applied to vertical and overhead surfaces. The working time is fairly long, but start with small batches until you are familiar with it. It does require a long drying time to cure and fully harden. Mixing needs to be done thoroughly. The final fully mixed material is white in color, and so is one the the parts, so you must be careful to mix all the white part into the other part - which is grey.