Customer Reviews for TOUGHBUILT 29" H x 77" W Universal Miter Saw Stand with quick release mounts, extending work supports and solid rubber tires

I was making a lot of mistakes & didn't know why. The reason, the Crown Moulding was not supported at the ends. The Toughbuilt helped me make clean cut with the extended ends. No more sagging ends & bad cuts. I'm a beginner but Toughbuilt makes me look like a professional. 5 Stars all the way.

Great stand, ignore all the negative reviews, it’s not hard to assemble or maneuver, took me 15 min to put together, the secret is to leave it upside down and to not pull the legs out until after the wheels are on, as for moving around it’s fine with my Dewalt 715… maybe it’s harder with a big sliding compound. I would definitely purchase again.

I like it is not heavy im enjoying i recomen this product to everyone.

Pros: Sturdy, well built, reasonably priced Cons: The miter stand cannot be stored upright, which is important, especially for DIYers that only have small working space. I made a small modification to the design so that it can be stored upright with wheels on the ground, by welding a support brace and adding rubber footing to the end plate.

Bought this for Makita 12” sliding saw which a monster and weighs 65#. But this bench is not really adequate for such duty. Wheels are too close together and legs are too difficult to deploy. Should have gotten something bigger. ok this might be ok for a lesser saw

Wouldn't recommend for moving around with a saw, as is the intent behind this device. Light weight tubular construction, won't measure up to loading in and out of a truck multiple times without bending. If you're spending $300 on a saw to make accurate cuts, this isn't the matching product for the saw.

I bought a new Dewalt DWS779 12" sliding saw and wanted a stand for the saw. This appeared to be a good value so I bought it. Once I set it up my saw I ran into a number of issues with the stand. I either had to modify my saw and or the stand. The issues I had were, the extension lock downs interfere with the saw handles, the handle for the stand was too tight with the bolt for the extensions and if you assemble the bolts to hold down the saw they interfered with the right miter stop.miter unless you cut them off. I also felt the unit was too low compared to my old Dewalt saw stand. Most of my issues were with the compatibility to my saw, other saws might not have the same issues

Great stand. The rollers on each end really make it easy to cut long work. The stand is the right height for work. The legs are very secure. The stand with my 12" dewalt saw rolls around real good. The only 2 complaints I have is the folded up stand with the saw mounted will not stand up by itself. Second the front handle is too short.

Great miter stand! I use it for a Rigid compound sliding miter saw. The stand is very sturdy and well built. I've used a couple others on jobsites (DeWalt and Ryobi) and this stand exceeds both comfortably.

wish it had come with a free margarita from Tequila Willy's....but otherwise, okish

Strong and highly functional miter saw table for a very good price. The colors match my Dewalt saw nicely, and setup was easy, I would buy this again, and recommend to my friends.

Crappy design for fokding and moving

Very good product. Does the job well. I assumed the legs were adjustable which they are not, just FYI. The biggest miss is the handle is hard to grab with the extention arm right there. Not a huge thing but annoying. The other issue which is possible to overcome is that when collapsed it cannot stand on its own which I wish it did. Over all I would still buy this one again so it's a good product but could be better.

Strong,well built and very helpful for my projects!

Mid-level construction quality but the levers that operate the swinging feet are poorly designed and not functioning well right out of the box. The extenders get in the way of the carrying handle and the wheels are too narrow and cause it to be unstable. Getting it up from a folded position is not easy by any means, nor is folding it back up with a saw attached. I will likely return it and buy a better stand.

The good: Excellent product. Robust build. Easy assembly and use. The bad: Could use better lifting hold (handle) on the wheeled end for comfort and stability during setup/takedown. To properly balance the stand when rolling it and for general use my saw had to be placed in such a way that a large portion of roller supports is behind the fence line.

it does somethings well, like makes a good table. everything else is very dissapointingly designed. i went this route instead of the gravity riser version, thinking i could pull the stand with the saw attached...nope.

Very easy to set-up, would be 5 stars if you could adjust the height. Feel like it's a little low to the ground.

Sturdy construction and smooth operation. Some steps in assembly were awkward because bolts and nuts had to be threaded in very tight spaces.

Rating provided by a verified purchaser

On 4/4/2021, I purchased the Universal 77 in. Miter Saw Stand (Model #TB-S510) from Home Depot Online. Overall I have been very pleased with sturdiness of the product. However, the stand has a few negative design features: 1) raiseable roller stop cuts knuckles when using handle; 2) wheel base is narrow, causing the cart to tip over with miter saw attached rolling over uneven ground; 3) extendable rollers wobble when extended; 4) raising and lowering legs is awkward when miter saw is attached (cart wants to rollover onto miter saw Or, cart needs to balance on handle if legs closest to wheel are deployed first.... which does not work well. The Model #TB-S510 is not sufficient for my needs.

So far so good. No issues with it so far. It is doing exactly what I bought it for. Good stuff!

Rating provided by a verified purchaser

The only complaint I have is that the finish on the main body did scratch off when I folded the legs in and out.