Customer Reviews for ruiling ABS Hand-held Bidet Toilet Sprayer Set in Silver

The sprayer works fine as a diaper Sprayer. If you use it as a bidet, well, the water that goes to my toilet is cold. Maybe check your water temperature before trying this on your own haunch. The sprayer itself is plastic, but I don't think it'll break if there's a short fall to your tile floor. The instructions are barely legible. I'm attaching a picture with a pen for scale. Would it be difficult to increase the size of the instructions? I like to have a sprayer on any toilet near my laundry room as this is a necessity for kids laundry. Overall, not the highest quality sprayer I've had, but it does the job

I installed the Ruiling ABS Hand-held Toilet Sprayer in my primary bath and was really pleased with the results. All the components, except for the flexible hose, are plastic so I'm not sure how long it will last, but the sprayer's functionally performs exactly as expected. It's possible to adjust the spray by reducing the water flow, but this device allows the spray pattern to be adjusted by turning the head on the sprayer and the intensity to be adjusted by changing pressure on the trigger. I really like that feature. Installation was very easy and took less than 30 minutes.

This bidet is an easy-to-install and simple to use. It will make any toilet look a bit more luxurious. My waste water goes to the city’s sewage system, but I wanted to have one to use as an alternative to baby wipes that clogs pipes and damage sewage pumps. A bidet is even better for homes that have a septic system. The hose and the adapter are easy to install, and the sprayer is simple to use. The sprayer head has all plastic parts. It took me about 25 minutes to complete the installation. I have been using it for some time and have not noticed any leaks or tangled hoses. The sprayer head is adjustable to a regular spray or bubbly. Uses and benefits for a bidet are: daily cleaning to fill a bucket, baby wipes or toilet paper alternatives, more hygienic than toilet paper, environmentally friendly, prevents clogging, and more. I am delighted with this product and would recommend installing them in homes.

• I cannot imagine using this to clean anyone’s “haunches” unless it is hooked to warm water. Even then, it would be awkward to use. It is good for spraying down and cleaning the toilet. Installation is quick if the toilet shutoff valve is functional—mine was. It only took 10 minutes after I read the instructions with a magnifying glass! The instructions are the new winner for the least legible instructions I have seen. See photo. I recommend going online for the instructions. Even then, I needed to enlarge the instructions to read them. Oddly, the use instructions come before the installation instructions. Some of the terminology is amusing: calling the flexible hose an “explosion proof” hose, calling the hook for the spray handle holder a ”pothook” and calling the divertor valve a “copper water separator.” Note: The “nut” on the valve that attaches to the toilet inlet has two small flats for a wrench which are hard to see. • Once installed the product works well. Due to the layout of my bathroom, not only can the toilet be sprayed down, but the separate shower and tub can also be sprayed. The hose I.D is 3/16” and the spray is strong. The spray nozzle can be adjusted from a broad spray to a strong steam by turning the nozzle end back and forth a few degrees. You will feel soft detents in each position. Continuing to turn the nozzle end fully counterclockwise will unscrew the tip from the spray body. I watched the installation video, but I found it easier to attach the hose to the valve before installing the valve. • The finish on the spray handle and holder is very smooth and shiny but feels lightweight. If you go with the tank mounted holder, make sure the nut end of the mounting bolts goes in the holder, so the round heads go against the tank. Installing the two bolts and nuts is a little fussy so good luck. There is also an up and down end so double check. I got it wrong the first time. The one-inch-wide SS bracket that hangs on the tank is not as wide as the holder which is 1-5/16” wide—but should be for good design and stability. The bracket is also thin at 20 gauge (.0299 inches). • What I found out after installation is how difficult it was to reach the diverter valve to turn the water on and off using the short—1-inch—long handle on the valve. The valve is all metal and works smoothly. But if is directly under the toilet tank where the regular water connection is located so depending on the toilet design, it is hard to reach on our one-piece toilet. As the manufacturer says that the valve should be closed between uses, turning it on and off can be tedious. In my case the valve location was too difficult to reach, and I removed it after a week. We have one-piece toilets, and the water connection is only 2-1/4” from the wall and 14-1/2” from the floor. A two-piece toilet tank connection is usually centered on the tank, much farther from the wall so it may work better. • The sprayer is a product of China.

The ABS Hand-held Haunch and Diaper Toilet Sprayer Set in Silver is a nice looking add-on that someone with babies could really use. While it looks really good the one that was shipped to me leaks. There appears to be some small pin hole in the hose as it is tight but still drips water. When I disassemble it I found the outside of the inner hose to be very wet. I dried it all off and reassembled it only to find it wet again on the inside and dripping water.

Unit still works fine and I like the fact that it defaults off. However, the hook that holds the holder onto the toilet has begun to rust (see photo). Its not noticeable but when you lift the tank cover its obvious. I prefer it still a similar model.

Good toilet mounted sprayer for the price. The sprayer and holder are made of chrome finish plastic, with the hose and bypass made with metal. The sprayer install is described well in the instructions and while it's not great quality, it is decent enough for its purpose. It does have a shut off which they advise you use every time the sprayer is used, which is a bit annoying, but given the quality, I would agree it's a wise precaution. you can adjust the spray pressure with the handle, and the type of spray by turning the spray head from "bubble" to "spray."

I was looking for a hand-held Bidet toilet sprayer that could be adapted for use in our RV porcelain toilet. Many RV's have a sprayer option, but ours didn't come with one. The installation was very simple (5 minutes) process of attaching diverter valve to bottom of toilet and connecting water supply line to bottom of diverter valve. Everything needed for installations was included, along with extra connection washers and Teflon tape. The sprayer works great: however, the sprayer hose holder is somewhat problematic and is difficult to get the hose to stay in place. The quality and chrome finish of the sprayer, hose and diverter is excellent. Now that we've experienced a Bidet sprayer (there is an initial learning curve), we will be adding Bidet sprayers to our home toilets as well.

How anyone lives without a bidet I do not know. They are great for cleanliness and wonderful to use to clean the toilet especially under the rim. The savings on toilet paper is pretty good also. It really pays off if you have a septic tank. They are very easy to install and last a very long time. This is my 2nd bidet as I plan to put this in my guest bathroom.

This gadget is made in China. This might be a useful addition to the bathroom, but because I could not stop it from leaking, I was unable to test it. I would have contacted the product owner for assistance, but no contact info was provided. See the JPG labeled "Shut-Off Valve Washers and Instr" - Note how small the instructions are (I had to get a magnifying glass out to read them) and the number of black flat washers (The instructions only say to install one of these, so not sure what the rest of them are for). Per the Instructions, I added a black washer to the top of the shut-off valve and screwed it on the toilet tank nipple. I ran out of threads before it tightened up. Removed the valve, added another black washer and screwed it back on the toilet nipple. It tightened up, but when I turned the water on, it leaked. Removed the valve and found one of the washers pushed up inside the toilet nipple. See the "Shut-Off Valve Toilet Connect End" and "Toilet Hose Connection End" JPG's below - Note the cone shaped washer in the end of the Toilet hose. Works like a champ to seal the connection between the hose and tank nipple. In my opinion, flat washer arrangement in the Shut-off Valve is doomed for failure. A spool of Teflon Tape was included, but not mentioned in the Instructions, so I didn't use it. The bidet (sprayer) holder bracket set-up worked great - JPG included. It's advertised as "Bidet Toilet Sprayer". The label on the box calls it "Haunch & Diaper Sprayer". I don't see how this would work as a Bidet. In my opinion, attempting to do so would result in quite a mess around the toilet.

The Ruiling hand held bidet sprayer is nicely made. The sprayer is plastic. But, I don’t think you would want a heavy sprayer being accidentally dropped onto a China toilet. It’s really easy to install. Took about ten minutes. As long as the water supply valve shuts off. The sprayer would be nice for cleaning soiled diapers or underwear. The act of using as a bidet seems a little awkward and cramped. Not to mention cold.

This Bidet toilet sprayer is good stuff. It comes with great installation instructions, so long as you have your reading glasses available because the text is tiny. It is easy to install if you have any DiY skills at all and it looks good once installed. It also functions quite well. The spray is strong and it is easy to use. About the only issue I see is that in Europe these have adjustable temperatures but this is going to be cold water. It would be nice to be able to warm it up a bit.

I recommend this if you don’t mind the cold water. I wish there was a way to hook it up to warm waterer. And it’s kind of awkward to use but keep it away from the little kids. It seems they think it is funny to spray each other. But let’s move on to the product and not the function. It’s made out of ABS material and it claims to be high quality. I can’t really judge that for sure. But it looks well made. The hose is listed as a high pressure hose which will keep it from bursting. There are two spray modes and two installation options. I’m sure it will work just fine cleaning out diapers but I’m not sure how great it will function as a bidet.

This kit is easy to install and most of it is metal. I did not have to use any thread tape though a small amount is provided as well as additional rubber seals. I do not notice any leaks yet. The water pressure is very strong and non-restrictive at all; in fact, you have to barely open the valve if you want a gentle flow. It's a decent finish, standard hose length and you have 2 types of flow (shower or stream) even though you can spin it either way to 7 positions. It took no more than a half hour to install; comes with both wall-mount hardware and tank-mount.

Hand-held bidet toilet sprayer is nickels white color. The sprayer is seems to improved one. The water on/off lever is quarter turn which is an effective figure for frequent operation. The spray on/off is lever type which comfortable to handle than the push button one. All the required fittings come with the set and instruction is clear, but in very small letters which I use m phone to read. This is good and nice product.

The installation showed a few leaks, and it is not very user-friendly, as water shoots everywhere. There is some learning curve to get used to the water settings. It has a spray and stream setting, but either feels quite strong. We have some beginning DIY skills so we had installed other plumbing products before, but this somehow caused more leaks than anything else we installed before. We used plumbing tapes at every end, but there is still a leak that starts after each use coming from the nozzle end itself. In terms of installing, the part that attaches to under the toilet tank showed some leaks that finally stopped with added plumbing tape. We first tried to use the hanger that attaches to top of the toilet tank, but it is not easy to use there, and it blocks the lid from closing. It comes with the option to install the hanger on the wall as well, so that is what we are trying next. While it doesn't leak when in not use (fortunately), it leaks from the nozzle on the spray and drips down after each use. It also shoots back a strong pressure (to the level of shaking the connection to the tank, causing some scares there) after using the spray and releasing the trigger. I hope it doesn't cause a long term damage there with use over time or rattle things to loosen. We are keeping an eye on it in case it causes any leaks, but a few weeks now and seems to be good. In terms of use, there is a steep learning curve. We are not new to bidets that are attached to the toilet bowl itself, but they tend to be not so hygienic, so this in theory looked great. While not in use, it doesn't have to sit in the bowl to get stained or collect build up. It is probably good to use as a diaper washer (it is also advertised to be one), but to replace a bidet to wash yourself needs some learning and adjustment. It sprays everywhere and is difficult to control and target on a small area. It is also good to wash the toilet bowl itself with it. The trigger has variable speed (like power tools lol) so you can theoretically control it with less water and less squeeze, but I still couldn't use it without making a mess and shooting water over the walls in the bathroom. Overall, it is probably good to use it to wash the toilet bowl and diapers, but is difficult to wash yourself for personal hygiene.

The RUILING ABS HAND-HELD BIDET TOILET SPRAYER SET IN SILVER is a wonderful addition for personal hygiene or other services. The diaper spray setting for spraying or rinsing items is a really great feature. It allows for hands free cleaning of the facility and has a reach that it can be used to rinse the shower or vanity surfaces. It is a good upgrade and stylish addition to bathroom remodeling projects.

There are two issues with installation which almost made me discard the unit for leaks. The connection to the supply house needs a larger washer than the one supplied (there is one supplied but I needed it for the connection of the valve to the tank). The bottom screw is too short to seat fully in the connector so the extra washer is needed. The washer you use on a garden hose works fine. The second is the instructions are on in very small print and this caused me to install the wrong connector to the to the sprayer so it didn't seat in the holder, it just flopped around. Having said all this, the unit does work well and looks good. You have the same choices you get at kitchen sink, bubbly spray or ring of small sprays. It works and is also useful for cleaning the toilet bowl if your low flow toilet doesn't clear everything.

This is the perfect attachment for a low flow toilet. Its main use will be to clean the toilet after use. Low flow toilets don't always get super clean, and this aids in the process. Installation took about 10 min. Keep in mind to use the washers correctly and don't over tighten the valve to the toilet or it will leak. You can turn off the water supply just to this device if you want. The water pressure is quite strong. Strong enough to clean any residue. Over all a great accessory to have,

Surprisingly simple plumbing project! Everything needed to install including multiple size washers and teflon tape is included in the box. The metal t-valve diverter was really nice and sturdy feeling and installed easily with no leaks. The handheld sprayer is the right weight for me to easily maneuver and the spray valve is simple to turn off/on control. I found turning the valve about about a quarter of a turn was the right water pressure for me - you can turn it all the way up and get a lot of spray - great for cleaning the actual toilet but not yourself ;) One heads up - when attaching the holder for the bidet -one direction will hold it properly and one is upside down. Test that you are putting it in the correct direction before you screw so you won’t have to unscrew it like I did! Easy fix, but no reason to re-do work. Overall, this whole install took me under 20 minutes - super drama free and will be a nice bathroom upgrade regardless of future toilet paper shortages.

The sprayer, handle and trigger is solid and sturdy. Best feature of this sprayer is definitely the hose. The hose is extremely flexible, unlike many I have come across. It moves like a well used, soft rope, not stiff at all. The trigger is like the cheap triggers that are wobbly, lose and has slack. The sprayer has surprising weight to it. The T connector is very solid, heavy and well made. Comes with plenty of washers and all screws, wall anchors and plumbers tape needed to install.

The Ruiling ABS Hand-held Bidet Toilet Sprayer is a a solid product to suit your needs. The best part about this toilet sprayer is being able to actually wash your toilet and scrub it out thoroughly which is a big bonus for those of us who like to keep a sparkling toilet bowl. The product is relatively easy to install and the one thing I would definitely hope that would be improved is the hanger hook for the tank. It seems a little flimsy but we have not ran into any issues so far. All in all a solid product!

It is an OK product. I am not super impressed. The trigger mechanism feels pretty cheap and I can see the main plunger inside looks to be plastic. I do not have a lot of confidence that it will stand the test of time. The nozzle itself is pretty good. There is a lot of pressure on the spray setting. I still am not sure how people use this on their backside without soaking themselves and everything around them. Even as a sprayer next to the tub for pets and kids I do not see how it works well as it connects to a cold water source. Fido might enjoy being frozen, but not kids.

As a toilet sprayer, I would recommend this product, but as a bidet, I would not recommend it. First, the quality of item. The hose is pretty nice, but the sprayer and the holder for the sprayer is not as high quality as I expected. The sprayer is plastic. But, to its credit, the plastic did seem relatively "solid," but it's still plastic. The metal holder was flimsy, dull, and scuffed up. It also had this weird black stuff stuck on it. I'm not sure if that black stuff was supposed to keep the holder from getting scratched, or what. In any case, the black stuff didn't look good, and it didn't protect the holder from getting scratched. Installation was not difficult if you used common sense. It came with a set of instructions, but they weren't very useful because it was printed on a TINY postcard-sized piece of paper. Couldn't they just print it on a regular letter-sized paper? Another thing... the sprayer was supposed to have different settings from "more bubbly" to "full spray." The nozzle turns to adjust the sprayer settings. Well, turning the nozzle did NOTHING that I could tell. It just sprays. To its credit, the intensity of the spray could be adjusted by how hard the handle is squeezed. Squeeze it harder and the water comes out stronger. Squeeze it lighter and the water comes out more gently. So using this as a toilet sprayer is okay. Using it as a bidet for personal hygiene is pretty awkward since directing the spray in the correct locations is difficult without making a wet mess.

This hand-held sprayer, as a product, is of good quality. It looks exactly like the pictures. The sprayer is made of light-weight durable plastic. I specifically like the connecting hose; it looks like chrome-plated metal and is very flexible. It is an obvious after-market add-on in a bathroom. It is designed to be connected to the cold-water supply line of a bathroom toilet, then used for rinsing something in or near the toilet. One suggested use is that as a bidet, something most Americans (my age, anyway) have little experience with. It looks awkward to use because it is hand-held. DIY installation is Home-Depot easy. The product comes with all the pieces, including instructions. There is a great installation video.

ABS Hand-held Bidet Toilet Sprayer Set in Silver The name of this product is misleading. Although this hand-held spray nozzle could be used as a mobile bidet, it is described as a soiled clothes/soiled diaper washer. Here are a few observations: Materials are adequate, but the variable-intensity spray nozzle is made of plastic. The included spray hose is 5 feet long, providing a usable length. If your toilet already has a flexible supply line, then installation is not difficult, although be aware that the provided washers may not provide a water-tight fit. It says it’s great for cloth diapers, but how many families still use cloth diapers? They also say you can use it to fill buckets with cold water or to fill your fish tank. Neither which are best served by the use of cold water. It can be used as a bidet spray, but only if you are petite, very flexible, and have a good aim. An inventive child could also use it as a squirt gun with an unlimited water supply.

Ordered this to help prevent a toilet paper shortage from wreaking havoc at my house during one or more additional potential lockdowns. The sprayer and most of the fitting materials are of nice quality. However, I was not at all pleased with the appearance of the hardware provided to hang the sprayer on the side of the toilet tank. It was of much lower quality metal than the rest of the hardware. The instructions were extremely tiny.

This bidet toilet sprayer is made out of very high quality ABS material. The silver look finish is simply amazing. The shipping was very prompt and packaging excellent as you can see on the picture. It has an adjustable sprayer settings and an adjustable water pressure. This sprayer is very easy to use, can be installed two different ways and a great addition to any bathroom. We would highly recommend it to everybody.

With the recent toilet tissue hoarding during the peak of the pandemic, it is only smart to think of a cleaner and greener way to always remain clean. This hand-held toilet sprayer set is an affordable, easy method to achieve this. I like the pressure switch handle that is used to control the water pressure. It makes it easy to operate the bidet and also, prevent splashes. With 2 spray mode, I use the jet mode for cleaning and rinsing off the toilet and around it while the spray mode is gentler. I love it and highly recommend it.

The RUILING ABS HAND-HELD BIDET TOILET SPRAYER SET IN SILVER is more of a chrome finish. This are not many parts to this which make installation relatively easy and quick. I did have a hard time getting it not to leak but just make sure you use all included gaskets and use plenty of the white pipe tape. The hose for the handle is more than long enough, in my case it will come in handy for cleaning the sink or rinsing something out. It is a little awkward to turn it on and off between uses but it ensures that the handle won't leak. The handle can be hung from the toilet bowl lid with included hook or mounted to the wall. The handle has to settings, a solid stream or one more like a kitchen sink sprayer. I suggest you practice with how much you turn the handle on before using, I have good water pressure and if I go full blast a could use it from the other side of the room lol. It will take some time to get used to so you won't make a mess. If you use a lot of flushable wipes this will help eliminate the need for them. I would recommend this if you need more than just toilet paper.