Questions and Answers for Algreen Cascata 65 Gal. Rain Barrel in Terracotta

A:  Hi Kate, Yes, that should work! Thanks, Allegra@TeamAlgreen

A:  Hi RR, It may go directly into the rain barrel, however, you may need an elbow attachment that angles the water from the downspout into the opening at the top of the barrel. Otherwise, you can use a diverter kit and the water would go from the downspout to the overflow at the back of the barrel. Thank you, Alby@Team Algreen

A:  Hi Jam5830, Yes, the Cascata has 2 overflow tubes. They are positioned horizontally at the back. Thank you, Team Algreen

A:  Yes, this model has an overflow.

A:  Yes, it is. If you attach a hose, just be aware that the pressure will not be like coming directly from your house. In my case, I attach a soaker hose to the to the tube that comes out from the bottom and hangs from the side. I use the spigot for filling watering cans. The whole system works on gravity feed so be sure to raise the water barrel when installing it.

A:  Hi, Yes, the spigot is threaded on both sides. Thanks, Team Algreen

A:  Not real Terracotta, but a very good replica. See my attached photo.

A:  No, graciela, the rain barrel is sturdy plastic.

A:  No, this product is made from plastic.

A:  Yes, I found a schematic diagram of the barrel on another site.

A:  Yes, KP44, you can completely remove the top. It sits nicely within the rim at the top of the barrel, and over the plastic "screen". We recommend using a flower pot set into the cavity for potted plants in the lid. When the barrel fills up, it overflows into the lid cavity. Will add a photo later, if possible.

A:  The top removes and the screen lifts out. Very easy to clean.