#1 Home Improvement Retailer

Questions and Answers for FiberCorr 0.350 in. x 48 in. x 96 in. Corrugated FRP Wall Panel

Internet #206084818

Model #F3C320

Store SKU #1001372054

  • PVC is resistant to moisture and chemicals for long lasting use
  • Textured panel with a scratch-resistant surface
  • Meets USDA, FDA and LA County Requirements

Questions & Answers

47Questions
caret
Q:Is this flexible? Toying with new ideas for camper van walls.
by|Aug 30, 2019
1 Answer
Answer This Question

A:  Hello, it's more flexible than solid plastic sheet, it will give a little bend, not much - should be fine to use as camper walls, thank you!

by|Feb 9, 2020
    1 found this answer helpful
    caret
    Q:Would this product be suitable for overlaying existing cooler walls in a meat processing room where temps. are at/or about 42 degrees and get washed down with hot sanitizing water every night this would be for the ceilings only would use regular FRP for walls. Substrate is aluminum with foam core 4" thick.
    by|May 3, 2019
    1 Answer
    Answer This Question

    A:  Hello, As long as the panels are acclimated to the room before install. Should not have a problem, thanks!

    by|May 7, 2019
      caret
      Q:What is the r factor if any, and what is the strength? As in can I use it on the floor of my boat, and if so, on what centers? Also, is it UV safe?
      by|Apr 13, 2019
      1 Answer
      Answer This Question

      A:  Hello, Typical installation is for wall application, this material has an R-value is less than 1, thank you.

      by|Jul 5, 2019
        caret
        Q:Big issue here how the product is represented. From Spec Sheet " It should never be exposed to extremely high or extremely low moisture conditions." The product description mentions it will not rot or deteriorate under high moisture conditions. Please explain ????????????????????
        by|Mar 4, 2019
        1 Answer
        Answer This Question

        A:  Hello, to clarify - It really depends what is referred to as high moisture and extremely high moisture. Basically you do Not want to leave these submersed in water. The face as long as there are no defects should deter water all day long. If water levels are going to be rising and falling in a room where these are used. You may want to find another panel. These are not like water proofing a room. These panels are surface mounted to existing walls/studs. The panel make up is fluted corrugated, water can get trapped in behind the panel if water levels rise. If water gets behind the panel, you are going to have bigger problems than worrying about a surface mounted panel. Rotting studs, wet insulation, etc… Car washes, touchless car washes, wash down bays, etc…should not have an issue with repelling water and cleaning up easily.

        by|Sep 17, 2022
          2 found this answer helpful
          caret
          Q:What seam and edge material can be purchased/is compatible with this product to connect the panels?
          by|Jan 5, 2019
          1 Answer
          Answer This Question

          A:  Hello, we do not offer connectors for this product, thank you.

          by|Jan 31, 2019
            caret
            Q:what colors does the frp panel come in
            by|Sep 19, 2018
            1 Answer
            Answer This Question

            A:  Hello, this is available in White, thank you.

            by|May 6, 2023
              caret
              Q:what is the method of install?? do you have this in midland,tx.? right now???? or Odessa, tx???
              by|Aug 22, 2018
              2 Answers
              Answer This Question

              A:  DO NOT use Titebond GREENchoice Fast Grab FRP Adhesive with fire rated or pressure treated plywood substrates. Only use Titebond Solvent-Based FRP Adhesive or Titebond Advanced Polymer Panel Adhesive. DO NOT use Titebond GREENchoice Fast Grab FRP Adhesive or Titebond Solvent-Based Adhesive for non-porous substrates

              by|Jan 21, 2019
                1 found this answer helpful

                A:  Hello, this material is available to ship from Dallas, TX - please call customer service at 800-421-0101 to provide email address to send install guide to - thank you! https://www.nudo.com/p_fibercorr_wall.php?crumb=%3Ca+href%3D%27l_wall_panels.php%27%3EWall+Panels%3C%2Fa%3E Install instructions are on this page.

                by|Jul 5, 2019
                  caret
                  Q:Is this price/listing for only one panel?
                  by|Mar 17, 2018
                  1 Answer
                  Answer This Question

                  A:  Hello, yes price is per panel, thank you.

                  by|May 5, 2023
                    caret
                    Q:What does the other side look like?
                    by|Dec 25, 2017
                    1 Answer
                    Answer This Question

                    A:  its single sided. The back would be raw substrate. The front is the facing of the FRP laminate.

                    by|May 5, 2023
                      caret
                      Q:Can it be used as outdoor wall panel?
                      by|Nov 25, 2017
                      2 Answers
                      Answer This Question

                      A:  The product is moisture resistant and rot resistant and is intended for use on walls and ceilings. As long as all applicable building, fire and safety codes for your area are adhered to, this product can be used for an outdoor wall panel.

                      by|Jul 14, 2020
                        5 found this answer helpful

                        A:  Spec sheet says not for high moisture use. I'm guessing rain would fall under that category. Also there is no mention of UV resistance so it may break down in sunlight.

                        by|Jun 19, 2024
                          6 found this answer helpful

                          Frequently Bought Together

                          +
                          +
                          Price: