Questions and Answers for Hampton Bay Truitt 14.2 in. 2-Light Brushed Nickel Modern Transitional Vanity with Frosted and Clear Edge Glass Shades

A:  Yes. It's suitable for any damp locations.

A:  I have this light but didn’t save the box so don’t have the SKU. 

A:  Store SKU #1001255327

A:  HB2577-35

A:  Yes, I think it is better down facing

A:  Yes, the fixture can be mounted with the glass shades facing down.

A:  There is a small screw to hold in place.

A:  I couldn't find just the glass. I had to buy a whole new fixture to replace the flawed glass.

A:  Contact your local home depot store for replacements.

A:  Contact manufacturer for replacement

A:  I would probably use the two light Truitt Light set.

A:  The Hampton Bay Truitt 3-Light Brushed Nickel Vanity Light with Clear and Sand Glass Shades can absolutely be used over a 22 inch wide vanity mirror. However if you are concerned that the light will not be bright enough or wide enough for your mirror, you can also consider the Truitt 4-Light Brushed Nickel Vanity Light version. Model No. 306697140 The 4 Light is 32.25 inches wide, where the 3 light is 23.3 inches wide.

A:  Not sure but my vanity mirror is 25 inch wide and it goes perfectly fine with it

A:  Dimensions Fixture Depth (In.) 7.3 Fixture Height (In.) 8 Fixture Width (In.) 23.3

A:  For replacement parts contact your local home depot store.

A:  Thin glass, good luck, call the manufacturer, home depot?

A:  I had it installed by an electrician. This is a wall fixture I used in the bathroom over the vanity with the bulbs facing the counter or down side. I don't know what other colors it comes in, but silver/satin nickle is beautiful. Not heavy but unless you know electrical work, please have an electrician install it.

A:  Easy to install and get an electrician if you need one. There are no batteries,.it is hard wired. No it does not come in bronze and it is not heavy.

A:  There are no batteries. This is wired for electricity. We already had wires in the wall from our last fixture so it was easy for us to install. Can’t remember if it came in other finishes or colors but the Home Depot description should show that. Look at the specifications on the item for weight.

A:  Any dimmer switch will do but you must make sure that you install bulbs that are dimmable. Otherwise, the lights will hum when dimmed.

A:  Your dimmer switch needs to be able to handle the maximum watts. If you use 3 60 watt incandescent light bulbs, you have a total of 180 watts potentially going through the circuit. If you use LED bulbs instead, your wattage goes way down. A 60 Watt equivalent LED bulb actually draws 9 watts. Therefore, using LED, the dimmer needs to handle 27 watts. So, any dimmer that has a watt rating greater than total bulb wattage will work. If you look at the complete specs on the light fixture, it indicates 150 watt. Doesn’t quite add up to me since it also says max is 3 60 watt bulbs but, that is another guide you could go by. So, if you plan on using incandescent bulbs, I’d suggest a 300 watt dimmer switch. If you plan on using LED bulbs, you can easily use a 150 watt dimmer.