Questions and Answers for OSI QUAD Advanced Formula 10 fl. oz. Green #764 Exterior Window, Door, and Siding Sealant (12-Pack)

A:  Thank you for the question. OSI QUAD Advanced Sealant is a solvent-based product and may not be compatible with butyl tapes, depending on the nature of your project. This sealant can dissolve the butyl material if it comes in contact.

A:  Thank you for the question. OSI color #423 is still an active product color for both QUAD and QUAD MAX color matched sealants. Most colors are only available via special order through your local retailer. If what you are trying to match is a door frame you might consider QUAD 455 as possibly the next closest match. Either way, it is best to discuss this with your local store associate for assistance.

A:  Thank you for the question. OSI QUAD is a solvent-based product and is not designed for use in or on car windshields and should not be considered. User assumes all risk and liability if used for this purpose. We recommend you contact your local automotive glass shop for help with your situation.

A:  Thank you for the question. Unfortunately, we need to know the manufacturer of the siding or window trim to recommend the right color of QUAD Sealant, if available. Once you have this information, you can look up the manufacturer and color by visiting www.ositough.com and selecting the Color Match tab on the site. If you need help, please reach out to our team at 1-800-624-7767 so we can assist you.

A:  Thank you for the question. OSI QUAD Sealant is a solvent-based product and cures by solvent evaporation. It is well suited for these applications as long as it is for an exterior use and not on the interior of the home. If solvents are a concern, you might consider OSI QUAD MAX as an alternative to using a solvent-based product.

A:  Thank you for the question. OSI QUAD Advanced Formula Sealant-Clear is a solvent-based product and may not be suitable for the intended use being described. This is not to say you cannot try but keep in mind it i snot designed for roofing applications and can dissolve asphalt impregnated roofing materials.

A:  Thank you for the question. OSI QUAD Clear is a solvent-based sealant and would not be recommended for sealing a small hole in a fiberglass water tank that may be under pressure or contain potable water and should not be considered. Perhaps if you provided more information about this repair situation, we may be able to help you. Please reach out to our team at 1-800-624-7767 and ask to talk with applications engineer.

A:  Thank you for the question. OSI QUAD Window, Door & Siding Sealant is a solvent-based product and can withstand light rain almost immediately, under normal exterior applications, assuming the surfaces were clean and dry prior to application. However, it is recommended to allow skin formation of the sealant to occur over a few hours.

A:  Thank you for the question. OSI QUAD takes 7 - 14 days to fully cure and this time is dependent on temperature, humidity, and depth of sealant applied. It does not get hard. This product is composed of elastomeric polymers which upon curing form a tough rubber-like seal to resist outdoor weather-related elements.

A:  Thank you for the question but unfortunately, we cannot see your photo. The use of OSI QUAD Sealant is more than likely okay as long as the intended application is not inside the home, and old caulking is removed before applying OSI QUAD. Perhaps if you call our helpline at 1-800-624-7767 and ask to talk with one of the Application Engineers, they can better help you in this situation, to ensure this will work for you.