A: N/A
A: if its the one I am thinking I used it on 5th wheel so probably same tip
A: Phil, thank you for your interest in the RYOBI Impact Rated Driving Kit. This kit includes Torx, Roberston or Square Recess, Slot or Flathead, Phillips, Allen or Hex. I could not find information on what a DEC head tip is however, all five of the typical drive bits are included in this kit. Thank you for asking, If you have further questions and would like to speak with a RYOBI Customer Experience Professional, please call, 1-800-525-2579 M-F from 9am-6pm EST. Hope this helps! - Vini
A: Yes I think there are 2 different size DEC heads.
A: No
A: Great deal
A: I actually had the same issue today trying to tighten a screw and it did not hold it i think it only works with certain metals maybe it was aluminum or something that does not grab on.
A: Hi Cathy, Thanks for your question on the RYOBI Impact Rated Driving Kit (50-Piece) AR2039. This kit includes a magnetic screw guide, socket adaptors and nut drivers. If you need further assistance with this question, please contact RYOBI Customer Support directly at 1-800-525-2579, Monday thru Friday 9am to 6pm EST and follow the prompts for Technical Support. Thanks for reaching out to us. - Eve
A: The product description says: "Includes: Magnetic Screw Guide, Socket Adaptors, and Nut Drivers." This is a little misleading or at least ambiguous; only the screw guide (bit holder) is magnetic.
A: yes
A: Yes
A: yes it does
A: Yes bought this 2 weeks ago , Works as it should
A: Hello Roger, Yes if your driver has as hex shank style it will work with the RYOBI Impact Rated Driving Kit (50-Piece) AR2039. Thanks for asking. - Eve
A: Yes perfect for drill
A: Of course. The bits work with a drop in chuck or as in your case a hand tightening chuck. Make sure to get the tip of the tool you choose to use inserted firmly in the part you are working on and start slow. This will minimize tool wear. And always wear the proper safety equipment. I.E.gloves and protective eyewear.
A: Yes.
A: Yes, can be used with any drill or 1/4" impact. ~ Ryobi Fanatics ~
A: Hi Mm, The RYOBI Impact Rated Driving Kit (20-Piece) AR2036 are Impact rated bits with hex shank for Impact Drivers and Drills and will work with the P209. I hope this helps and we appreciate your interest in RYOBI!
A: Great question Deltavee! This RYOBI Impact Rated Driving Kit (70-Piece) AR2040 can be used with the RYOBI drills. Thanks for asking! - Eve
A: No not one
A: No drill bits, just drivers
A: No
A: No not this one, but you can get them.
A: Yes these will fit in a P215 driver and most other drives
A: yes/ it should fit the drill driver.
A: These are 1/4" drive bits and that should work with any 1/4" drill or driver.
A: Yes
A: Hi Penghui. Thanks for your interest in the RYOBI Brand. Yes, this RYOBI AR20404 Impact Rated Driving Kit (70-Piece) will work with the P215 and other Impact Drivers and Drills.- Eve
A: No, and neither is the extender-- these are made with the 'click-lock' for use with the impact drill. You would have to use a magnetic extender, I think ryobi has one sold separately, but probably not a click-lock type.
A: No they are not magnetic as far as I can tell. The screw guide is the only magnetic piece.
A: Thank you Tony for your interest in RYOBI AR2040 kit, all bits in the kit are magentic for your convenience. ~Best Regards, Ashley
A: I only work with them I am happy with them.
A: Just plain nut drivers. No magnetic ability
A: No, and it doesn't make sense why would they be non-magnetic? Very disappointed!
A: No. Just the bit holder.
A: Unfortunately no, that would have been nice.
A: Just the Bit Holder
A: not the holder the bit are magnetic
A: The screw guide is the magnetic.
A: Only a few of the Flat Tip and Phillips drivers are magnetic.
A: Just a bit holders
A: Hi Trudd92! Thank you for your question. This kit includes a magnetic screw guide for your convenience.
A: I believe that all of the longer bits are magnetic but I don't think the shorter ones are because you will want to use a but holder for those but you can magnitise the small bits by rubbing them on a magnet
A: Everything is magnetic, though not that much.
A: Just the Bit Holder. In most uses this will provide sufficient magnetism to hold the screws or nuts.
A: Just the bit holder.
A: No
A: Nope got to buy a socket set for that
A: Nope, no metrics in this kit
A: The largest socket included is 1/2" (12,70mm). See attached image for more information.
A: Hi Sarah, This Ryobi AR2040 Impact Rated Driving Kit does not come with a 18mm socket. Thanks for asking! - Eve
A: If it has the same shank lock, which most. 1/4 inch impact drivers do.
A: Yes they work with all brands of drill drivers.
A: yes it would
A: Thank you Carter for your inquiry. We would recommend to inquiry compatibility with your tool's manufacture. ~Best Regards, Ashley
A: The bits are universal. They will fit any 1/4 in hex driver.