Questions and Answers for Square D Homeline 200 Amp 8-Space 16-Circuit Outdoor Ringless Overhead/Underground Main Breaker CSED

A:  Hi, We recommend to contact us directly using our chat live https://www.se.com/us/en/work/support/customer-care/contact-schneider-electric.jsp where an agent will be able to give you further assistance on this matter. Warm regards. Schneider Electric Customer Care

A:  Jason, This RC816F200C is rated for 200A continuous. Regards, Schneider Electric Customer Care

A:  Hello Concerneduser, None of the CSED are supplied with neutral bonding screws. ALL the CSED are UL listed for, and marked as, "Suitable ONLY For Use As Service Equipment". Therefore, the main neutral is factory bonded to the enclosure as standard. Regards, Schneider Electric Customer Care

A:  Check with your local utilities 

A:  Yes, this meter main can be used above ground and underground. 

A:  Hello Gene, This RC816F200C can be installed overhead/underground. Regards, Schneider Electric Customer Care

A:  Yes it is bottom or overhead ( top )

A:  yes it will work

A:  Yes. There is access for upper or lower feed.

A:  Hello Josh, this device comes only with the top end closing plates. For the hubs you would need to get them separate. They are type A hubs, max 2.5 inches. Warm regards, Schneider Electric Customer Care.

A:  No. Box has sealed access whole you can remove to add the hub on top and knock outs on bottom if underground service. 

A:  It comes with a hole for the hub, but the hub is sold separately..

A:  You will have to purchase hub separately.

A:  Thank you for your recent inquiry with The Home Depot. Your local Home Depot Store might be able to do a Special Order for you directly with the vendor, please reach out to your local in-store associate for best assistance. We appreciate your business and look forward to serving you in the future.

A:  Yes. Suitable for 200 amp main panel.

A:  Yes it does. Lugs are typically rated for 250 MCM conductor size.

A:  It does not...I made that mistake ;(

A:  No, you would use normally a 60 amp breaker to support a sub- panel. 

A:  Hello David, Yes, this RC816F200C comes with feed-thru lugs provisions. Regards, Schneider Electric Customer Care

A:  Hello, If you're talking about the lever bypass, the RC816F200C is a ringless device without bypass. Regards, Schneider Electric Customer Care.

A:  No This Unit does not have the bypass lever.

A:  Hello LF, We recommend you to get in touch with your electrician so he can advised the best solution for your application. But you can use a breaker to feed a sub panel. Regards, Schneider Electric Customer Care.

A:  You do not have to use the Feed Through lugs. Installing a 100 amp breaker for a Feeder Circuit would be the Compliant way to do it !

A:  Hello, You can not add the horn bypass in the field for your RC816F200C. You need to select a device with the horn bypass factory installed. Regards.

A:  Yes, I bought mine last week. They installed it in an hour. I had a great experience.