Q:Could this be used to insulate above ceiling in a travel trailer?
by|Oct 22, 2022
2 Answers
Answer This Question
A: If you mean under the roof yes. On top of the roof no. This is polyurethane and it WILL absorb water.
by|Oct 25, 2022
A: Thank you for your inquiry and for your interest in the DAP Touch ‘n Foam Pro System 200 Kit. The inquiry that you have posted does not contain enough detail or background to allow us to provide a proper reply in this format. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain this additional information from you and provide you with the guidance you need to move forward with your project. When calling in please have your measure data available.
by|Oct 24, 2022
Q:Is this foam considered closed cell
by|Sep 20, 2022
1 Answer
Answer This Question
A: Thank you for posting your inquiry and for your interest in the DAP Touch ‘n Foam products. The Touch ‘n Foam Pro System 200 and 600 kits dispense a low pressure, two-component closed cell polyurethane foam product that is tested and documented per ASTM D6226 to achieve 90%+ Closed Cell Content. Should you have any questions or require further assistance, please feel free to contact DAP’s Technical Customer Service Department at 888-327-8477.
by|Dec 28, 2022
1 found this answer helpful
Q:i am enclosing my covered patio. will this foam adhere to the underside of my metal room? and will it be leak proof as my roof now leaks during heavy rains
by|Sep 12, 2022
1 Answer
Answer This Question
A: Thank you for posting your inquiry and for your interest in the DAP Touch ‘n Foam products. The DAP Touch ‘n Foam System 200 kit is designed for air sealing and insulation. It would not be recommended for use in the manner as described (roof leak repair product). Should you have any additional questions or require further assistance, please feel free to reach out to DAP’s Technical Customer Service Department at 888-327-8477.
by|Sep 12, 2022
Q:What product would be recommended for an area such as eaves. I have an old home where there isn?t any attic. In the winter we get condensation on our metal flashing.
by|Sep 7, 2022
1 Answer
Answer This Question
A: Thank you for your inquiry and for your interest in the DAP Touch ‘n Foam Pro System 200 Kit. The inquiry that you have posted does not contain enough background or detail to allow us to provide a proper response/recommendation in this format. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain this additional information from you, to allow us to determine how best to proceed.
by|Sep 8, 2022
Q:Can this product be used in campers?
by|Sep 7, 2022
1 Answer
Answer This Question
A: Thank you for your inquiry and for your interest in the DAP Touch ‘n Foam Pro System 600 Kit. The inquiry that you have posted does not contain enough background or detail to allow us to provide a proper response/recommendation in this format. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain this additional information from you, to allow us to determine how best to proceed.
by|Sep 18, 2022
1 found this answer helpful
Q:Does this have to be use all at once you tap it? Could use some than go back and use the system some other day?
by|Aug 27, 2022
2 Answers
Answer This Question
A: Thank you for your inquiry and for your interest in the DAP Touch ‘n Foam products. As indicated in the product usage instructions (as well as online video resources), under Section 3: Shutdown and Storage between Uses: Partially used foam kits can be reused within 30 days of the initial application by adhering to these instructions: 1. Close the cylinder valves by turning clockwise. 2. Do not drain chemical from the hoses. 3. Push the trigger safety into the locked position. 4. Remove the used nozzle, but DO NOT DISCARD. 5. Wipe the applicator barrel with a clean cloth, making sure the chemical exits are clean. Do not use solvent. 6. Apply more lubricant to the O-ring on the applicator barrel. 7. Re-attach the used nozzle, which will prevent air and moisture from entering the hoses. 8. After 7 days of non-use, remove the used nozzle, dispense a small amount of liquid, then wipe clean and re-seal with the used nozzle. 9. Store partially used products at room temperature (60°– 90°F / 16°– 32°C) in a dry area. Do not expose to open flame or temperatures above 120°F (49°C). 10. Products must be re-warmed to 70°– 90°F (21°– 32°C) before re-use. Failure to strictly adhere to these instructions will result in reusability issues. Should you have any additional questions, please feel free to reach out to DAP’s Technical Customer Service Department at 888-327-8477.
by|Aug 29, 2022
A: Yes but you'll need to clean out the the nozzle. I think they give you an extra nozzle but I don't remember. You can use Brake Clean spray or some other solvent and it will dissolve the foam left in the nozzle while it is still soft.
by|Sep 1, 2022
Q:Can this be used to lift concrete?
by|Aug 23, 2022
1 Answer
Answer This Question
A: Thank you for your inquiry and for your interest in the DAP Touch ‘n Foam products. The TNFP System 200/600 Kits deliver a Low-Pressure Medium Density Foam. These formulas are not able to be used for "mud-jacking" (slab lifting) applications. DAP does not currently offer a one or two component spray polyurethane foam for this type of specialized application. This type of application requires the use of more specialized products, that are injected under high pressure. Should you have additional questions or require further assistance, please feel free to contact DAP’s Technical Customer Service Department at 888-327-8477.
by|Nov 26, 2022
Q:can this be used on exterior
exposed to weather
by|Aug 14, 2022
2 Answers
Answer This Question
A: No, interior only
by|Aug 17, 2022
A: Thank you for posting your inquiry and for your interest in the DAP Touch ‘n Foam products. The Touch ‘n Foam Pro System 15, 200 and 600 kits dispense a low pressure, two-component closed cell polyurethane foam product. 2K spray polyurethane products are not rated for UV exposure, as such, a weatherproof (UV) barrier/coating or other suitable protection would be critical to the products performance. Should you have any additional questions, please feel free to reach out to DAP’s Technical Customer Service Department at 888-327-8477.
by|Aug 15, 2022
Q:Do you guys have a machine rental for this?
by|Aug 5, 2022
2 Answers
Answer This Question
A: There was no machine to rent, the gun/applicator, hoses, and tanks full were all included in the kit.
by|Oct 21, 2022
A: Thank you for posting your inquiry and for your interest in the DAP Touch 'n Foam products. The System 15, 200 and 600 Kits are designed as a completely self-contained disposable kits. Should you have any questions or require further assistance, please feel free to contact DAP’s Technical Customer Service Department at 888-327-8477.
by|Aug 8, 2022
Q:Can this be spayed onto pressure treated wood? I'm building a shed and plan to use this product to insulate the floor. I'm using pressure treated plywood as under decking and I like that this will help seal it at well.
by|Jul 22, 2022
2 Answers
Answer This Question
A: Thank you for your inquiry and for your interest in the DAP Touch ‘n Foam products. The Touch ‘n Foam Pro System 200/600 Kit can be used for insulating the undercarriage of a wood storage shed with exposed framing. Of note, both one and two component spray polyurethane foams do not have good UV resistance and would need to be protected from sunlight exposure. Likewise, we would recommend that you contact your local building department to ensure that there are no additional requirements or restrictions in place. Should you have any additional questions, please feel free to reach out to DAP’s Technical Customer Service Department at 888-327-8477.
by|Jul 29, 2022
1 found this answer helpful
A: Yes it can... It will also help keep out the furry critters that sometimes like to use the gaps between joists to build little hideouts as well.