Customer Reviews for Everbilt 1-1/2 in. x 30 in. Oil-Rubbed Bronze Continuous Hinge

Exactly what I expected. Top quality

Great finish.

It was the wrong size, couldn't use it

Nice finish. Product was as described. Fast shipping!

Didn't have a chance to finish the project. I'll get it done next spring. Should work great for my needs.

Well made from excellent material. Fair price.

A sturdy hinge in the finish I needed to match nearby cabinets.

Countersinks in hinges left screw heads proud. Need either smaller diameter screw heads or deeper countersinks.

Worked fine, easy to cut!

I bought two, one was OK the other was horrifically sloppy. I mounted them dead on and when I hung the cabinet one of the doors dropped out of square. Not much, and it's just a shop cabinet, but nothing looks worse than an uneven gap between two doors. Now I have to treat the edges for a shadow line. RATS!

The material of he continuous hinge seems a little thinner than I was expecting but when screwed onto the project it feels fine. The finish looks good and it comes with 12 screws with a matching oil rubbed finish. Hinge operates smoothly even after cutting. Can be cut down to size using a hacksaw or some other metal cutting saw. Wish it came with more screws as it's hard to find #4 screws with an oil rubbed finish.

Excellent hinge for projects with lids that can be used as benches or flip top tables. Continuous hinges have a lot more strength for their size than individual hinges, and alignment is not a problem. It is very easy to cut to length, and the hinge pin stays in place. Screw holes are spaced every two inches and are countersunk so the hinge will fold completely flat for a concealed application. I like the oil rubbed bronze finish that doesn't tarnish.

Beautiful finish. It's a little darker than I expected but a really nice finish. Believe it or not the hinge even comes with screws. This is a typical what I call piano hinge. It's sturdy, it can be cut down to the size you need and relatively easy to install. The hinge is designed to be hidden if that's what you want or not. This rigid little hinge allows you to put on a piece of furniture or door that doesn't have a lot of weight.

I am building a small table for my porch and would like to put a top on it. This hinge will come in handy as the wood will be a dark brown and a chrome hinge just wouldn't work properly. I'm not sure whether it is designed for exterior use but at the price it will be cheap enough to replace. Plenty of available holes for attaching to the top, and side of the table.

Just as expected. The hinge is smooth and within tolerance. Provides a nice smooth and reliable joint for whatever project you are using it on. I used it for a lit on a bench which was exactly 30 inches wide so it worked out perfectly. Shipping was nice and fast and Home Depot shipped it in a nice card board tube which kept it protected during transit.

This continuous hinge is the perfect product for finishing our feral shelter for cats at our shop. As a light to medium use, it allows me to open and lift the roof periodically to clean the inside bedding area with straw. The ample amount of holes (30, 15 on each side of the strip) will keep it perfectly aligned to accommodate the weight of the wood roof.

Don't we call these "piano hinges"? This is a good hinge to use for a load-bearing application. I used it on a cabinet door then hung tools on the door. The metal it's made from is surprisingly beefy. While it is described as "bronze" I struggle to call this color bronze. It is a dark brown so dark that when looking at it one must hold a personal debate as to whether it is dark brown or actually black. I call this color dark chocolate and move on. It comes with a handful (30) of color matched screws. Great item for your next woodshop project.