Customer Reviews for GE 30 Amp Temporary Power Inlet
- UL listed and ANSI certified
- Outdoor NEMA 3R Enclosure
- Galvanized steel construction with electro-deposition paint
Customer Reviews
Overall Ratings
Once installed it's sturdy and functional. Installation was fine except the writing of the actual...
December 13, 2020
Once installed it's sturdy and functional.
Installation was fine except the writing of the actual socket.
They use Allen screws ( fine, just different). I had to loosen the socket from housing to access them ( also fine).
However, when tightening the lugs it was apparent the threads were not chased, or maybe just not formed. It was extremely difficult to thread them on order to clamp the wire.
I backed off one grub screw and immediate regretted it. The screw was captive and wouldn't start threading. Fixing this one screw took an extra 45 minutes, basically doubling the install time. If the terminal lugs were simply threaded before being sent this would be a 5 star review.
Also, tip while installing, see the photo below, remove the cover plate, flip it out towards you, re-secure ( upside down), then thread and install your wire. This let's you get the right strip length and bend on the wires for installation.
Used for my portable generator setup to power the whole...
June 16, 2020
Used for my portable generator setup to power the whole house, But you must have a interlock for the main breaker , or you could kill a lineman. the interlock can be a slide interlock ($75 you install, If you're qualified) that bolts into your current breaker panel, or a full manual or auto interlocking switch in a separate panel $300 to $1000. This box is just a good cover to plug your generator into. You can have it plugged in and close the lid fully. If you're not fully comfortable get electrician, But easy install if you're comfortable/skilled with electricity.
It's bigger than expected, but made a great connection point for my generator. I then wired 5 out...
February 25, 2020
It's bigger than expected, but made a great connection point for my generator. I then wired 5 outlets in the house, only for generator power. Our "lights out weekend" testing everything went very well. If you can't afford a whole house generator system, this is a nice piece to making some necessary preparations for when situations are beyond your control.
I looked at several generator inlet boxes and found this to be the overall best value and quality...
November 4, 2019
I looked at several generator inlet boxes and found this to be the overall best value and quality. It is well built and allows you to cover the plug and cord during inclement weather. I would rather have something over designed than just the minimum. Especially during a emergency situation.
Delivered on time and well made box.
May 14, 2019
Delivered on time and well made box.
The power inlet box is well built with heavy wall enameled steel. It is also well designed, note...
January 29, 2019
The power inlet box is well built with heavy wall enameled steel. It is also well designed, note that the outlet is installed at an angle to prevent water infiltration when plugging in the extension cable in the rain. Also note that the extension cable can remain plugged in with the cover plate folded down, protecting the connection from the weather, the cable extends out of the bottom of the box when plugged in and the cover closed. Finally, also note that the cover door can be locked in place with the extension cable connected; notice the tab for a padlock that extends through the cover plate on the right side. All in all a first quality product at a reasonable price.
This is a serious piece of hardware. It will certainly last a long time and won't get damaged if...
January 1, 2019
This is a serious piece of hardware. It will certainly last a long time and won't get damaged if a baseball hits it. I need to think of a way to keep bees out of it, though.
When using solid 10-gauge copper wire in this box, it is important to have plenty of working leng...
October 17, 2018
When using solid 10-gauge copper wire in this box, it is important to have plenty of working length so that the wire can be folded correctly inside the box when re-inserting the receptacle / plate. The clearance between the receptacle and the rear of the box is a bit tight at the "fold" point in the center. The cover does not seal the box in a normal manner when the generator cord is not connected - - it may be prudent to cut some foam or similar material to stuff into the slot to prevent bugs building a nest.
Cost is a little high but worth it. Easy to install and wire.
September 11, 2018
Cost is a little high but worth it. Easy to install and wire.
Excellent Product! Perfect for my application! Buy It Now!
September 19, 2017
Excellent Product! Perfect for my application! Buy It Now!
Review this Product
Share your thoughts with other customers