Customer Reviews for Magic 7/8 in. x 11 ft. Tub and Wall, Peel and Stick Caulk Strip in White

Sorry to hear of your disappointment. When using these types of products, it can be frustrating due to the specific instructions and work that comes with using a product like this. Our Peel & Stick Caulk is designed to create a tight seal to keep moisture out. Depending on if the surface was prepared per the instructions, all prior caulk must be completely removed, and the surface thoroughly cleaned with a scouring powder and rubbing alcohol to ensure all residue has been removed. Pre-bend each strip of caulk by folding it at the score line that runs down the middle to form a 90° angle. It’s best to work in small sections and continue to slowly pull the backing off and press the caulk strip firmly to the surface and avoid having to reposition the strip. In corners where two strips will meet, cut the bottom half of the strip at a 45° angle to create a flat mitered corner. Thank you for sharing your feedback, we take pride in producing high quality products and will continue to make improvements.

Sorry to hear of your disappointment. When using these types of products, it can be frustrating due to the specific instructions and work that comes with using a product like this. Our Peel & Stick Caulk is designed to create a tight seal to keep moisture out. Depending on if the surface was prepared per the instructions, all prior caulk must be completely removed, and the surface thoroughly cleaned with a scouring powder and rubbing alcohol to ensure all residue has been removed. Pre-bend each strip of caulk by folding it at the score line that runs down the middle to form a 90° angle. It’s best to work in small sections and continue to slowly pull the backing off and press the caulk strip firmly to the surface and avoid having to reposition the strip. In corners where two strips will meet, cut the bottom half of the strip at a 45° angle to create a flat mitered corner. Thank you for sharing your feedback, we take pride in producing high quality products and will continue to make improvements.

Sorry to hear of your disappointment. When using these types of products, it can be frustrating due to the specific instructions and work that comes with using a product like this. Our Peel & Stick Caulk is designed to create a tight seal to keep moisture out. Depending on if the surface was prepared per the instructions, all prior caulk must be completely removed, and the surface thoroughly cleaned with a scouring powder and rubbing alcohol to ensure all residue has been removed. Pre-bend each strip of caulk by folding it at the score line that runs down the middle to form a 90° angle. It’s best to work in small sections and continue to slowly pull the backing off and press the caulk strip firmly to the surface and avoid having to reposition the strip. In corners where two strips will meet, cut the bottom half of the strip at a 45° angle to create a flat mitered corner. Thank you for sharing your feedback, we take pride in producing high quality products and will continue to make improvements.

Sorry to hear of your disappointment. When using these types of products, it can be frustrating due to the specific instructions and work that comes with using a product like this. Our Peel & Stick Caulk is designed to create a tight seal to keep moisture out. Depending on if the surface was prepared per the instructions, all prior caulk must be completely removed, and the surface thoroughly cleaned with a scouring powder and rubbing alcohol to ensure all residue has been removed. Pre-bend each strip of caulk by folding it at the score line that runs down the middle to form a 90° angle. It’s best to work in small sections and continue to slowly pull the backing off and press the caulk strip firmly to the surface and avoid having to reposition the strip. In corners where two strips will meet, cut the bottom half of the strip at a 45° angle to create a flat mitered corner. Thank you for sharing your feedback, we take pride in producing high quality products and will continue to make improvements.

: Sorry to hear of your disappointment. When using these types of products, it can be frustrating due to the specific instructions and work that comes with using a product like this. Our Peel & Stick Caulk is designed to create a tight seal to keep moisture out. Depending on if the surface was prepared per the instructions, all prior caulk must be completely removed, and the surface thoroughly cleaned with a scouring powder and rubbing alcohol to ensure all residue has been removed. Pre-bend each strip of caulk by folding it at the score line that runs down the middle to form a 90° angle. It’s best to work in small sections and continue to slowly pull the backing off and press the caulk strip firmly to the surface and avoid having to reposition the strip. In corners where two strips will meet, cut the bottom half of the strip at a 45° angle to create a flat mitered corner. Thank you for sharing your feedback, we take pride in producing high quality products and will continue to make improvements.

Sorry to hear of your disappointment. When using these types of products, it can be frustrating due to the specific instructions and work that comes with using a product like this. Our Peel & Stick Caulk is designed to create a tight seal to keep moisture out. Depending on if the surface was prepared per the instructions, all prior caulks must be completely removed, and the surface thoroughly cleaned with a scouring powder and rubbing alcohol to ensure all residue has been removed. Pre-bend each strip of caulk by folding it at the score line that runs down the middle to form a 90° angle. It’s best to work in small sections and continue to slowly pull the backing off and press the caulk strip firmly to the surface and avoid having to reposition the strip. In corners where two strips will meet, cut the bottom half of the strip at a 45° angle to create a flat mitered corner. Thank you for sharing your feedback, we take pride in producing high quality products and will continue to make improvements.

Sorry to hear of your disappointment. When using these types of products, it can be frustrating due to the specific instructions and work that comes with using a product like this. Our Peel & Stick Caulk is designed to create a tight seal to keep moisture out. Depending on if the surface was prepared per the instructions, all prior caulks must be completely removed, and the surface thoroughly cleaned with a scouring powder and rubbing alcohol to ensure all residue has been removed. Pre-bend each strip of caulk by folding it at the score line that runs down the middle to form a 90° angle. It’s best to work in small sections and continue to slowly pull the backing off and press the caulk strip firmly to the surface and avoid having to reposition the strip. In corners where two strips will meet, cut the bottom half of the strip at a 45° angle to create a flat mitered corner. Thank you for sharing your feedback, we take pride in producing high quality products and will continue to make improvements.

Sorry to hear of your disappointment. When using these types of products, it can be frustrating due to the specific instructions and work that comes with using a product like this. Our Peel & Stick Caulk is designed to create a tight seal to keep moisture out. Depending on if the surface was prepared per the instructions, all prior caulks must be completely removed, and the surface thoroughly cleaned with a scouring powder and rubbing alcohol to ensure all residue has been removed. Pre-bend each strip of caulk by folding it at the score line that runs down the middle to form a 90° angle. It’s best to work in small sections and continue to slowly pull the backing off and press the caulk strip firmly to the surface and avoid having to reposition the strip. In corners where two strips will meet, cut the bottom half of the strip at a 45° angle to create a flat mitered corner. Thank you for sharing your feedback, we take pride in producing high quality products and will continue to make improvements.

Thank you for sharing your feedback. This is not intended for kitchen surfaces.

Sorry to hear of your disappointment. When using these types of products, it can be frustrating due to the specific instructions and work that comes with using a product like this. Our Peel & Stick Caulk is designed to create a tight seal to keep moisture out. Depending on if the surface was prepared per the instructions, all prior caulk must be completely removed, and the surface thoroughly cleaned with a scouring powder and rubbing alcohol to ensure all residue has been removed. Pre-bend each strip of caulk by folding it at the score line that runs down the middle to form a 90° angle. It’s best to work in small sections and continue to slowly pull the backing off and press the caulk strip firmly to the surface and avoid having to reposition the strip. In corners where two strips will meet, cut the bottom half of the strip at a 45° angle to create a flat mitered corner. Thank you for sharing your feedback, we take pride in producing high quality products and will continue to make improvements.

Sorry to hear of your disappointment. When using these types of products, it can be frustrating due to the specific instructions and work that comes with using a product like this. Our Peel & Stick Caulk is designed to create a tight seal to keep moisture out. Depending on if the surface was prepared per the instructions, all prior caulk must be completely removed, and the surface thoroughly cleaned with a scouring powder and rubbing alcohol to ensure all residue has been removed. Pre-bend each strip of caulk by folding it at the score line that runs down the middle to form a 90° angle. It’s best to work in small sections and continue to slowly pull the backing off and press the caulk strip firmly to the surface and avoid having to reposition the strip. In corners where two strips will meet, cut the bottom half of the strip at a 45° angle to create a flat mitered corner. Thank you for sharing your feedback, we take pride in producing high quality products and will continue to make improvements.