Customer Reviews for Teks 10 x 1-7/16 in. Phillips Round Head Screw with Wings (300-Pack)

Points need to be sharper. Had to pre-drill most holes through 1/8 mild steel angle.

Better performance than other brands we’ve used.

Worked great for attaching plywood to some metal members of an odd tobacco barn. No problems at all and held tight.

I was surprised to see that the phillips head held up in drilling process without slipping.

99 put of 100 screws failed due to the stupid tabs that make the hole bigger than the threads, leaving nothing for it to bite into. A complete waste of time and money. Plywood to aluminum.

Best wood to metal screws i have ever used. Self tapping and very strong. Exspensive but worth it!!

The screws would make the hole to big and not tighten.

These screws work fantastic

Securing plywood to aluminum tubing I had many of these not seat all the way. My impression is those wings are wider than the screw shaft and when going thru the tubing it creates a hole larger than the threads can grip.

Perfect for a metal building. A #3 ph should be provided though.

These screws are very strong and fit my application perfectly. Held down a new RV floor

I used these to replace floor on utility trailed. I did use a 1/8 drill bit for a pilot hole

These are great drilled right into a Conex box without stripping

Third box I have used works great to add 2x4s to my metal garage

1 out of about every 10 screw wouldn't drill through the metal

Serves as a good drill bit, but not as a screw/fastener. It easily drills a hole, which is too big for the screw. The screw is USELESS.

Terrible. These dont work at all, they drill through wood no problem but they dont grab into the metal at all. DONT BUY

They are fine. Nothing spectacular. They did the job but I wouldn't rave about them.