
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Get the faucet repaired and working perfectly again with this Glacier Bay Cartridge Assembly. This Cold Side Only cartridge has a ceramic disc valve for long lasting performance. Includes a limited lifetime warranty.
Product Height (in.) | 1.92 in |
|---|---|
Product Width (in.) | 0.98 in |
Application | Bathroom Sink, Kitchen Sink |
|---|---|
Color/Finish | #hite |
Color/Finish Family | White |
Fits Faucet Brand | Glacier Bay |
Handle Part Type | Cartridges |
Material | Ceramic |
Plumbing Part Type | Cartridge |
Returnable | 90-Day |
Manufacturer Warranty | Limited lifetime warranty |
|---|
Thank you. We suggest you contact the Home Depot Customer Care Department at 1-877-527-0313 and they would be glad to assist you in finding the cartridge you need.
Thank you. We suggest you contact the Home Depot Customer Care Department and they would be glad to do some troubleshooting with you. They can be reached at 1-877-527-0313.
The cartridge pivots 90° so, unless there is something in the faucet base or handle to limit the swing to 45°, handles should pivot 90° from closed to full-open. If the faucet handles originally did not pivot that far, I would check for some kind of pin or lug in the bottom of the handle that was (but isn't any longer) limiting the swing and remount the handle so that that limiting pin/lug engages properly with whatever was creating the limit.
Thank you. That model comes with a Limited Lifetime Warranty so simply contact the Customer Care Department at 1-877-527-0313 and they would be glad to assist you with getting those stems.
I got mine few months ago from Home Depot online and it was shipped fast and works perfect until now.
Yes it will work. Careful when selecting the cold or hot water part
Yes it will I replaced both of mine hot and cold.
Thank you. Since we don't know what type of faucet you have, we would not be able to assist you with the installation.
1. Turn off cold and hot water to faucet 2. Remove both handles (may need to pop off cover/plug to get to screw holding the handle on. 3. Loosen the nut holding cartridge in place 4. Remove cartridge by pulling upwards and wiggling out 5. Wipe clean inside of faucet to make sure new cartridge doesn't get caught on dirt or foreign matter. 6. Install new cartridge while aligning plastic tab in slot on faucet. Cartridge only can be installed one way. 7. Replace nut and tighten up 8. Replace handle/knob. And replace decorative cap/plug 9. Turn water back on slowly and check for leaks.
The water handle should not turn 360 degrees. If it does, then you probably need this replacement part. I had to replace this part because the black rubber ring did not provide a good seal and the faucet dripped.
Yes, its a ceramic cartridge and its broken. Its only suppose to be a quarter turn. Replacing the cartridge should solve the problem. Just get your faucet model number and get a parts breakdown to make sure you are buying the right cartridge.
must be broken, get a replacement at home depot store, make sure you get the right one, because they look alike but if they are the wrong one, they will leak.
Thank you. Simply contact the Customer Care Department at 1-877-527-0313 and they would be glad to assist you with finding the cartridges for your Lyndhurst Kitchen faucet.
I had to replace the entire faucet with another brand.
I contacted a plumber as it was a bit beyond my expertise. I have installed kitchen and bathroom faucets, but didn't want to experiment on taking one apart to repair it if there was a chance I could more damage in the process.
how do i install the cold cartrige???
Thank you. Since we don't know what faucet you have, we cannot assist in installation.
Viewing 1-8 of 12