A: Riguen - The warranty for this is one year. -GP Support
by|Feb 26, 2024
Q:Why do the specs say 115v, 220v. ? Which is right?
by|Feb 5, 2024
1 Answer
Answer This Question
A: Janet - They are both correct. The pump comes preset to 220V, however, if you want to change it, there is a clip inside which lets you change that to 115V. -GP Support
by|Jun 16, 2024
1 found this answer helpful
Q:If the jetpump sucks the well dry, will it keep running trying to get back up to pressure? Is there any sort of shutoff to prohibit the pump from burning up this way?
by|Feb 4, 2024
1 Answer
Answer This Question
A: James - The pump is controlled by the pressure switch. The pump will continue running until the pump reaches 50PSI. It does not have an automatic shut off valve. -GP Support
by|Aug 24, 2024
1 found this answer helpful
Q:Can I change to a 40-60 pressure switch on my 3/4 HP pump?
by|Jan 26, 2024
1 Answer
Answer This Question
A: Mike - The pressure switch does come preset to 30/50. However, you can definitely change that to 40/60. Simply take off the cap to the pressure switch and inside are instructions. Remember that CW means clockwise. -GP Support
by|Aug 2, 2024
2 found this answer helpful
Q:Replaced broken pipe and pump. How do I get the air out of the lines
by|Jan 21, 2024
1 Answer
Answer This Question
A: Rhonda - I'm not sure of your question. If you mean the line that goes down the well, there should be a foot valve at the bottom of the well that keeps a prime. If you mean the pipes in your house, you may want to call a plumber. You may have to keep water running for awhile to get all air out, but we ask that you contact a professional as they would have better advice on what you should do. -GP Support
by|Jan 22, 2024
Q:Do u sell shallow well 3/4 jet pump without pressure switch. Mine is on the water tank
by|Jan 20, 2024
1 Answer
Answer This Question
A: We do not have one. We do have a Booster pump which does the same thing and that does not require a pressure tank and does not have pressure switch. The model is WPS07505PCK. -GP Support
by|Jan 21, 2024
Q:What pipe size are the inlet and output connections?
by|Jan 16, 2024
1 Answer
Answer This Question
A: John - The input would an 1.25'' size, and the output would be 1 inch. -GP Support
by|Jan 16, 2024
Q:re J200A3 3/4 horse power pump, I adjusted the pressure switch from 30-50 to 40-60 psi the pump makes a swishing sound once over 50 psi & takes much longer 20-30 sec to build pressure from 50 to the 60 psig cut off. Is this normal noise and and time ?
by|Dec 22, 2023
1 Answer
Answer This Question
A: Derek - No. This is not normal. Please give us a call at 844 242-2475 and we can go over your setup. -GP Support
by|Dec 26, 2023
Q:What kind of pump do I need for shallow well to water my lawn
by|Nov 24, 2023
1 Answer
Answer This Question
A: Tyrone - We strongly Recommend a Sprinkler Pump. We sell one at Home Depot that is the IRP15001K -GP Support
by|Nov 25, 2023
Q:what's the best pressure in a pressure tank for this pump. I have a 3/4HP pump and it turns on and off very frequently, every 8 seconds approx.
by|Nov 3, 2023
2 Answers
Answer This Question
A: You want the initial pressure in the pressure tank to be about 2 psi less than the cut-in pressure of the pressure switch. For a pump with a 30 psi cut-in pressure the tank should be 28 psi.
by|Nov 17, 2023
A: Guillermo - The pump comes preset to 30/50 PSI. If the pump is turning on very frequenly, you probably need a bigger pressure tank. Most houses start at a 20 gallon pressure tank but on average, alot do go with a 50 gallon or larger pressure tank. -GP Support