Questions and Answers for Graco Magnum ProX17 Stand Airless 3000 PSI Paint Sprayer

A:  No, elastomeric paint is too thick, it must be rolled on. Mike

A:  Hello, We appreciate your question. Out of the box you can use water-based and oil-based products that are not labelled flammable. With a lacquer conversion kit you can use these oil based products and other hot solvents. To see if a material is flammable or not check the back of the container. You can also look at the safety data sheet provided by the material manufacturer. If you are unsure if the product is flammable, please give our technical service group a call at 844 241 9498 M - F 7:30 am to 5:30 pm CST. Thank you, Graco Technical Service Group

A:  Yes, this unit includes the tip and hose.

A:  Hello German, Very easy to change the pump out on the fly. All you need to do is disconnect the hoses from the pump, open the gate and slide the pump out. Thank you, Graco Technical Service Group

A:  Yes you can, but be sure to get the oil base kit for it. The kit contains replacement gaskets that won't fail with oil based materials.

A:  can i use it to spray Elastomeric?

A:  Yes , oil is fine just make sure you clean it when done !

A:  You can spray oil base, latex base and stain. Polyurethanes can also be sprayed. I love this sprayer.

A:  Yes. See Graco website for cleaning deals for oil based paints.

A:  Hello Local803, Thank you for your question. I would not recommend spraying 2 part epoxy with the Magnum ProX 17. Thank you, Graco Technical Service Group

A:  no

A:  It comes with a .015. You can use up to a .017 (thus the name X"17")

A:  They're all the same no matter what the pump size. It's all about the gun your spraying with.

A:  Jz, This is a great sprayer to leave a good finish. You will need to get the spray tip and pressure to the correct setting for the material. You could also try some FFLP tip, but they would require a blue RAC X guard. If you have any questions, please give us a call at 844 241 9498 M - F 7:30am to 5:30pm CST. Thank you, Graco Technical Service Group

A:  yes it left a very smooth surface and sprayed even.

A:  Yes.

A:  Yes, this model is compatible with oil-based paint.

A:  Dear Valued Home Depot Customer, To better answer your question, please contact the HD.com customer service department at 800-430-3376 call any day between 6 a.m. and 2 a.m. EST, they can either answer your question or transfer you to your local store to answer your specific question. Thank you, Graco Technical Service Group