Customer Reviews for Powermate 105 - 135 psi Pressure Switch

Very simple installation, and a big contrast from the original regulator on my 1997 Campbell Housfeld 20 Gallon. Turn on at 107, and cut off at 136. Pretty darn good.

Exactly like the switch that failed fail failing ? Poor

Easy to install and works great

Worked for us! So happy to find our part! Thank you, Home Depot!!!!

Rating provided by a verified purchaser

Exact match.

this switch was the same as the original so was very easy to replace was replaced because of an air leak easy to order on line delivered to the store for free

Much nicer and robust than I expected. The wiring diagram was a bit hidden, but I figure it out. I like that the switch breaks both sides of the line. My previous switch had screw terminals, this one has push-ons - glad I had some to crimp on the wires. It seemed to come set at the maximum pressure, I had to scrape some sealant out of the adjusting screw to lower it, but now it works well. I like the large On/Off knob on the top compared to the little hidden lever my previous one had. It has 4 outputs - and comes with self-sealing plugs for the ones you don't need. Overall - a good item that does it's job well.

Worked great

It did not work. Returned for a refund cause it was not a functioning switch.

Switch does not work made with cheap plastic

Exactly what was needed to fix our air compressor

easy install worked great

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Worked great, double check load in and load out, configure was different than original, but no issues.

It was set from the factory to turn off @ 135 lbs., but when it reached that pressure, it blew the internal relief valve. I had to adjust down the automatice turn-off pressure to 125 lbs., which then worked without blowing the relief valve. Now it is working fine.

Worked fine

Off with the old pressure switch. And install the new one. The hardest part was getting the electrical wires reconnected to the new switch. It was really simple after I figured out how to remove the air pressure tube from the pressure switch to ht air tank.

This is the 2nd switch n less than 9 months. On /off switch stopped wrk'n on the first one. On the second one , have had it maybe 2mths won't start motor on its own, have to keep try'n to get it to start. Had to get a motor because it shorted out the compacidors, power n but no power out to the motor nw.

pressure switch works well im very happy with it.

Worked perfectly, just what I needed! Would highly recommend to anyone needing a pressure switch.

exact replacement

Doesnt work right out of the box.

It would only pump to 50 psi,then not come back on until 25 psi. I adjusted it as much as i could, not it goes to 60psi. It was leaking air out when turned off. I kept fooling with it and it stop doing that. It still shuts of at 50-60 psi. Gordon

It was easy to install and fit perfect.

Does what it is supposed to