#1 Home Improvement Retailer

Customer Reviews for SANDEPLY 5.2mm - Sandeply Plywood (1/4 in. Category Common: 1/4 in. x 4 ft. x 8 ft.; Actual: 0.205 in. x 48 in. x 96 in.)

Internet #203414042

Model #479023

Store SKU #479023

  • Features minimal core voids for protection when sawing
  • Sande plywood construction withstands damage
  • Smooth surface makes it easy to paint

Customer Reviews

  • 4.2
    out of 717 reviews
  • 71% recommend this product
Filter by:
Showing 1-30 of 717 reviews
Deceiving
I find it very annoying that when you search plywood underlayment on Home Depot.com this product props up at top of search. However, if you check the Q&A it is flooded with responses from the manufacturer stating "NOT" to use it as a flooring underlayment material. They say it is cabinet grade material but I wouldn't use it for cabinets. It is very flimsy material and does not cut clean. Honestly I don't know what you should use it for. I wouldn't recommend anyone buy this material.
by
Response from SandeplyJul 17, 2023
Our 5.2mm is an interior glue panel and is best not used for underlayment as it could possibly take on moisture and warp. HD should have several other options for underlayment. Our 5.2mm panels are used primarily for cabinet backs and drawer bottoms. SandeGFP
    Fit like a glove!! Perfect for my project!
    by
    • Verified Purchase
    by
    • Verified Purchase
    by
    • Verified Purchase
    by
    • Verified Purchase
    by
    • Verified Purchase
    by
    • Verified Purchase
    by
    • Verified Purchase
    Worked vey well, good quality
    by
    • Verified Purchase
    This plywood is good for my laser projects. Every once...
    This plywood is good for my laser projects. Every once in a while, I’ll run into a spot that doesn’t cut all the way through and I have to use an exacto knife to help with the cutting.
    by
    • Verified Purchase
    Great, all square and 90-deg. Nice and “sticky “ for...
    Great, all square and 90-deg. Nice and “sticky “ for usage as underlayment, but smooth finish so we can walk barefoot all week on it w no worries until we can put laminate wood over it.
    by
    • Verified Purchase
    Excellent quality product...
    Excellent quality product
    by
    • Verified Purchase
    by
    • Verified Purchase
    by
    • Verified Purchase
    More voids than I would like to see. Weakens...
    More voids than I would like to see. Weakens Fastening. On the plus side the exterior appearance is overall good.
    by
    • Verified Purchase
    I need to pay more attention. Grabbed this sheet and...
    I need to pay more attention. Grabbed this sheet and didn’t look at both sides. When I pulled it out to use it for my cabinets, looks like it had been returned and wasn’t in great shape on the “good” side. Hour drive one way to HD so I sanded it the best I could and used it.
    by
    • Verified Purchase
    too thin if i wanted paneling id have bought that instead of plywood
    it is advertised as 1/4 inch, but it is really 1/5 inch.
    by
    • Verified Purchase
    Works good for my application....
    Works good for my application.
    by
    • Verified Purchase
    Sandeply!
    Decent quality plywood for cabinet backs and projects. Not quite finish ready, but okay for prime and paint. Good laminated core.
    by
    • Verified Purchase
    • Recommended
    Basic big-box plywood. Not the best, not the worst
    Basic big-box plywood. Not the best, not the worst
    by
    • Verified Purchase
    by
    • Verified Purchase
    After building built in shelves in a friend's house, primer/paint...
    After building built in shelves in a friend's house, primer/paint was applied, then noticed the shelf was delamanating.
    by
    • Verified Purchase
    3 found this review helpful
    by
    • Verified Purchase
    Not good for much more than siding
    Edges were not well glued. Lots of holes not filled
    by
    • Verified Purchase
    Handl sheet
    This is a handy and convenient plywood sheet. It requires minimal sanding to make it usable in projects. Like most plywood it's thinner than stated. This actually close to 3/16".
    by
    • Verified Purchase
    • Recommended
    by
    • Verified Purchase
    by
    • Verified Purchase
    by
    • Verified Purchase
    by
    • Verified Purchase
    by
    • Verified Purchase
    Showing 1-30 of 717 reviews

    Frequently Bought Together

    +
    +
    Price:

    Compare Similar Hardwood Plywood

    current product
    5.2mm - Sandeply Plywood (1/4 in. Category Common: 1/4 in. x 4 ft. x 8 ft.; Actual: 0.205 in. x 48 in. x 96 in.)
    1/8 in. x 4 ft. x 8 ft. Utility Panel (Actual: 0.106 in. x 48 in. x 96 in.)12mm - Sande Plywood ( 1/2 in. Category x 4 ft. x 8 ft.; Actual: 0.472 in. x 48 in. x 96 in.)1/4 in. x 4 ft. x 8 ft. PureBond Birch Plywood
    BrandSANDEPLY SANDEPLYColumbia Forest Products
    Name5.2mm - Sandeply Plywood (1/4 in. Category Common: 1/4 in. x 4 ft. x 8 ft.; Actual: 0.205 in. x 48 in. x 96 in.)1/8 in. x 4 ft. x 8 ft. Utility Panel (Actual: 0.106 in. x 48 in. x 96 in.)12mm - Sande Plywood ( 1/2 in. Category x 4 ft. x 8 ft.; Actual: 0.472 in. x 48 in. x 96 in.)1/4 in. x 4 ft. x 8 ft. PureBond Birch Plywood
    Price
    $2988
    $1558
    $4555
    $4968
    Ratings
    (717)
    (226)
    (1295)
    (264)
    Nominal Product Thickness (in.)1/41/81/21/4
    Nominal Product Width (ft.)4444
    Nominal Product Length (ft.)8888
    Panel/Veneer GradeB2B4B2C4
    Plywood FeaturesPaintable, Sanded, StainablePaintable, StainablePaintable, Sanded, StainablePaintable, Sanded, Stainable
    Number Of Ply3-Ply3-PlyMulti-Ply3-Ply
    Exposure DurabilityInteriorInteriorInteriorInterior
    View ProductView ProductView ProductView Product