#1 Home Improvement Retailer

Internet #205466794

Model #XUDV2248

Store SKU #1000900620

22 in. x 4 ft. Rafter Vent (10-Pack)

$1921
  • For attic air circulation
  • Affordable solution
  • 22 in. x 4 ft. Attic Ventilation System (10-Pack)
  • View More Details
Store
0 in stock
Text to Me
How to Get It

Frequently Bought Together

+
+
Price:
$1921

Product Overview

For improved air circulation in the attic, install the Durovent 22 in. x 48 in. Rafter Vent (10-Pack). It can be cut to fit most joist spaces and is an affordable way to meet energy-code requirements for air flow. Use it between rafters to create an air channel through insulation to help keep air flowing freely in your attic.
  • Improves insulation efficiencies, allows for cooler attics in the summer months, drier attics in the winter months and helps prevent ice-dam formation
  • Install between rafters to provide an unobstructed air channel through insulation to keep air flowing from soffits to ridge vents
  • For use in 24 in. or 16 in. rafter or truss applications
  • Excellent option for new construction
  • Can be cut to fit most joist spaces
  • Cathedral ceilings require a continuous run of vents from intake to exhaust with a 1 in. space between each vent
  • Perforated center line to fit most applications
  • Wide nailing flange and center strut allow for easy installation
  • Economical way to meet energy-code requirements for air flow
  • The right insulation can save on energy and heating and cooling bills. Check out our Buying Guide for helpful tips.
  • How much do you need? Let our calculator help:
    Insulation calculator button

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
48
Product Height (in.)
1.375
Product Width (in.)
22

Details

Insulation Accessory Type
Rafter Vent
Insulation Type
Accessory
Returnable
90-Day

Warranty / Certifications

Warranty Information
Limited Warranty

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 3.8
    out of 145 reviews
  • 71%recommend this product
Filter by:
Showing 1-10 of 145 reviews
Worst than terrible
Toronto house. 10yrs old. This crap has melted, yes melted! Every baffle has melted closed at the soffit end. This stops all airflow. The attic becomes very hot. Need to replace every one. Don't know why they melt at the soffit end? A product designed to create airflow actually does the opposite!
by
    Easy to instal if you know the tricks
    People say it's to fragile and hard to work with. But that's just lack of understanding of how to install this stuff. A simple trick I use is to save old plastic milk jugs, cut them into 1 inch squares and staple through that into the durovent in the middle of the valley, and then staple a check at the top center of the valley. This holds it in place without tearing. Add a second durovent below the first overlapping an inch, staple a check in the middle of that piece and then staple a check where the two overlap. You don't need a hundred staples, you only need to add three staples max on each side. If you have a problem spot, staple a plastic check there. Use a 4 foot metal ruler to cut the durovent sections with a box cutter long ways facing down on somthing like plywood. Make cross cuts with sharp large scissors. When manuvering the panels into place grab the panels by the holes / divits, the holes are close enough together so that your hand can span two holes at once like a bolling ball, holding the panels this way prevents damage and makes it easier to position the panel. 3/8ths T50 staples are a good choice.
    by
      • Recommended
      3 found this review helpful
      Easy to use and manage. Good price.
      Easy to use and manage. Good price.
      by
      • Verified Purchase
      • Recommended
      Not as easy of a install as others I have used but worked out great was able to use a small stapl...
      Not as easy of a install as others I have used but worked out great was able to use a small staple to tack to underside of roof sheeting to hold in place
      by
      • DIY
      • Verified Purchase
      • Recommended
      Great fit and easy to separate into halves for smaller...
      Great fit and easy to separate into halves for smaller rafters. The material is so light that the staples would sometimes go straight through.
      by
      • Verified Purchase
      by
      • Verified Purchase
      The product is fine. I had to move a...
      The product is fine. I had to move a bunch of junk to get to it, but hey, that is the way this store is managed.
      by
      • Verified Purchase
      There were supposed to be for 24 or 16 in...
      There were supposed to be for 24 or 16 in center rafters but they dont fit!! Will be returning most of them.
      by
      Response from ADO Product ExpertMay 4, 2022
      These will fit against the roof deck between your rafters - you secure them to your roof deck.
      These are 22 inches wide or when split 11 inches wide. Please call 800-666-8191 with questions.
      • Verified Purchase
      by
      • Verified Purchase
      Poor product
      Very flimsy won't hold staples
      by
      Response from ADO Product ExpertApr 14, 2022
      These are the most economical vent we sell; so you may like our proVent product. It is a more rigid plastic.
      A hammer tacker or a squeeze tacker applies the staples firmly into the roof decking; it should have no problem holding these vents in place - use staples with a 3/8" leg or 5/16" leg.
      • Verified Purchase
      Showing 1-10 of 145 reviews